Můj účet (Přihlášení)
Košík je prázdný.
0
Košík
telefon Help a kontakt
Doprava zdarma při nákupu nad 5 999,00 Kč
100denní politika vrácení
Můj účet (Přihlášení)
Seznam přání
Košík je prázdný. (0)
Košík
Novinky Novinky
Slevy

Přes 300 000 zákazníků - děkujeme vám!

4,93/5 "Velmi dobré" (1400+ hodnocení)

40 000+ produktů pro lov a střelbu

Přebíjení Příprava nábojnic Zkracování nábojnic Držáky pro úpravu nábojnic L.E. WILSON 6MM BR FAMILY FIRED CASE HOLDER Support

L.E. Wilson Rifle Case Holder ensures precision trimming and reaming, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
-7 %

L.E. WILSON 6MM BR FAMILY FIRED CASE HOLDER

815145027962 749001664
Varianty
Filtry:
Variations:

Varianty:

-7 %
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 6MM BR FAMILY FIRED CASE HOLDER
649 CZK 3 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 6 mm BR Norma, 22 BR (Benchrest) Remington, 30 BR (Benchrest) Produkt č.: 749001664
Skladem
649 CZK 3 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with fired and new brass for ultimate accuracy.
RIFLE CASE HOLDERS - 7.63X54R CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired, New Náboj: 7.62 x 54 mm Russian Produkt č.: 749001207
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for consistent results.
RIFLE CASE HOLDERS - 6.8 REMINGTON SPC FIRED CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 6.8 mm Remington SPC, 22 Nosler, 224 Valkyrie Produkt č.: 749001208
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for 6.5 Grendel cases, offering unmatched accuracy and repeatability for all case types.
RIFLE CASE HOLDERS - 6.5 GRENDEL FIRED CASE HOLDER
649 CZK 5 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 6.5 Grendel Produkt č.: 749001209
Skladem
649 CZK 5 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for optimal performance.
RIFLE CASE HOLDERS - 35 REMINGTON FIRED CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 35 Remington Produkt č.: 749001616
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision trimming, reaming, and deburring for ultimate accuracy, supporting fired and new cases alike.
RIFLE CASE HOLDERS - 223 ACKLEY IMPROVED FIRED CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 223 Ackley Produkt č.: 749001619
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming cases, supporting the case body for consistent results and repeatability.
RIFLE CASE HOLDERS - 30 M1 CARBINE FIRED CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 30 Carbine Produkt č.: 749001621
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holders ensure precise trimming, reaming, and deburring for consistent results, fitting both fired and new cases for ultimate accuracy.
RIFLE CASE HOLDERS - SAUM FAMILY NEW CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: New Náboj: 300 Remington SAUM, 6.5mm Remington SAUM, 7mm Remington SAUM Produkt č.: 749001625
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming cases, supporting the case body like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - 30-30 WINCHESTER NEW CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: New Náboj: 30-30 Winchester, 32 Winchester Special, 38-55 Winchester, 30 Remington, 25 Remington, 32 Remington Produkt č.: 749001630
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring, supporting both fired and new cases for ultimate accuracy.
RIFLE CASE HOLDERS - 378 WEATHERBY MAGNUM FIRED CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 378 Weatherby Magnum Produkt č.: 749001631
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming with uniformity, supporting cases like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - 7.5X55MM SWISS FIRED CASE HOLDER
649 CZK 5 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 7.5 x 55 mm Swiss Produkt č.: 749001633
Skladem
649 CZK 5 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming cases, supporting both Fired and New sizes for optimal accuracy.
RIFLE CASE HOLDERS - 375 H&H MAGNUM CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired, New Náboj: 375 H&H Magnum Produkt č.: 749001635
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing ultimate accuracy and uniformity for all case types.
RIFLE CASE HOLDERS - 338 LAPUA MAGNUM CASE HOLDER
649 CZK 3 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired, New Náboj: 338 Lapua Produkt č.: 749001637
Skladem
649 CZK 3 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, compatible with both fired and new brass for consistent results.
RIFLE CASE HOLDERS - 6.5X47MM LAPUA NEW CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč
Skladem
Case Type: New Náboj: 6 x 47 Lapua, 6.5 x 47 mm Lapua Produkt č.: 749001638
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity in trimming, reaming, and deburring cases, fitting both Fired and New brass for consistent results.
RIFLE CASE HOLDERS - 204 RUGER NEW CASE HOLDER
649 CZK 3 649,00 Kč * 699,00 Kč
Skladem
Case Type: New Náboj: 204 Ruger Produkt č.: 749001639
Skladem
649 CZK 3 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with both new and fired brass.
RIFLE CASE HOLDERS - 45-70 GOVERNMENT NEW CASE HOLDER
649 CZK 3 649,00 Kč * 699,00 Kč
Skladem
Case Type: New Náboj: 45-70 Government Produkt č.: 749001640
Skladem
649 CZK 3 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming with a design that mimics a firearm chamber for ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 22 HORNET FIRED CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 22 Hornet Produkt č.: 749001641
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, supporting Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - 30-30 WINCHESTER FIRED CASE HOLDER
649 CZK 4 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 30-30 Winchester, 32 Winchester Special, 38-55 Winchester, 30 Remington, 25 Remington, 32 Remington Produkt č.: 749001643
Skladem
649 CZK 4 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming, supporting neck-sized, fired, or new cases with precision.
RIFLE CASE HOLDERS - 220 SWIFT FIRED CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 220 Swift, 220 Arrow Produkt č.: 749001644
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with fired and new brass.
RIFLE CASE HOLDERS - 221 REMINGTON FIREBALL CASE HOLDER
649 CZK 3 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired, New Náboj: 221 Remington Fireball Produkt č.: 749001645
Skladem
649 CZK 3 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - 222 REMINGTON MAGNUM FIRED CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 222 Remington Mag, 6 x 47 (6 mm/222 Mag) Produkt č.: 749001646
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, supporting accuracy with a design mimicking a firearm chamber.
RIFLE CASE HOLDERS - 257 WEATHERBY MAGNUM FIRED CASE HOLDER
Case Type: Fired Náboj: 300 Weatherby Magnum, 257 Weatherby Magnum, 270 Weatherby Magnum, 7 mm Weatherby Magnum, 340 Weatherby Magnum, 375 Weatherby Magnum Produkt č.: 749001647
L.E. Wilson Rifle Case Holder ensures precision trimming, reaming, and deburring for 6.5x55mm Swede cases, offering ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 6.5X55MM SWEDE FIRED CASE HOLDER
Case Type: Fired Produkt č.: 749001649
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, offering ultimate accuracy and repeatability for all case types.
RIFLE CASE HOLDERS - 6MM BR FAMILY NEW CASE HOLDER
Case Type: New Náboj: 7 mm BR (Benchrest) Remington, 6 mm Rem BR (Benchrest), 22 BR (Benchrest) Remington, 30 BR (Benchrest) Remington Produkt č.: 749001650
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, offering consistent results for both Fired and New cases, enhancing your reloading accuracy.
RIFLE CASE HOLDERS - WSM FAMILY NEW CASE HOLDER
Case Type: New Náboj: 300 WSM (Winchester Short Mag), 270 WSM (Winchester Short Mag), 7 mm WSM (Winchester Short Magnum), 325 WSM (Winchester Short Mag) Produkt č.: 749001651
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing uniformity and accuracy for both fired and new cases.
RIFLE CASE HOLDERS - 6.5X47MM LAPUA FIRED CASE HOLDER
Case Type: Fired Náboj: 6 x 47 Lapua, 6.5 x 47 mm Lapua Produkt č.: 749001652
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both new and fired brass for optimal performance.
RIFLE CASE HOLDERS - 220 RUSSIAN NEW CASE HOLDER
Case Type: New Náboj: 220 Russian, 220 Beggs Produkt č.: 749001653
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, fitting Fired, New, Neck, or Full Length sized brass.
RIFLE CASE HOLDERS - 257 ROBERTS FIRED CASE HOLDER
Case Type: Fired Náboj: 257 Roberts, 6 mm/244 Remington, 7 mm Mauser (7 x 57 mm Mauser), 6 mm Remington Produkt č.: 749001654
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for ultimate accuracy and uniformity, compatible with fired, new, neck, and full length sized cases.
RIFLE CASE HOLDERS - BELTED MAGNUM NEW CASE HOLDER
Case Type: New Náboj: 458 Winchester Magnum, 300 Winchester Magnum, 338 Winchester Magnum, 7 mm Remington Magnum, 308 Norma Mag, 8 mm Remington Mag, 7 mm STW, 358 Norma Mag, 264 Winchester Magnum Produkt č.: 749001655
L.E. Wilson Rifle Case Holders ensure precise trimming and reaming with unmatched accuracy, supporting both Fired and New cases for consistent results.
RIFLE CASE HOLDERS - WSM FAMILY FIRED CASE HOLDER
Case Type: Fired Náboj: 300 WSM (Winchester Short Mag), 270 WSM (Winchester Short Mag), 7 mm WSM (Winchester Short Magnum), 325 WSM (Winchester Short Mag) Produkt č.: 749001656
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming with a unique design for ultimate accuracy and repeatability for fired and new cases.
RIFLE CASE HOLDERS - 204 RUGER FIRED CASE HOLDER
Case Type: Fired Náboj: 204 Ruger, 20 Tactical Produkt č.: 749001657
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing ultimate accuracy and repeatability for your cases.
RIFLE CASE HOLDERS - 284 WINCHESTER FIRED CASE HOLDER
Case Type: Fired Náboj: 6.5 x 284 mm Winchester, 284 Winchester, 6 mm - 284 Winchester Produkt č.: 749001658
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, offering unmatched accuracy and repeatability for fired and new cases.
RIFLE CASE HOLDERS - 6MM PPC FAMILY FIRED CASE HOLDER
Case Type: Fired Náboj: 22 PPC, 6 PPC, 20 PPC Produkt č.: 749001661
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass effortlessly.
RIFLE CASE HOLDERS - 22-250 REMINGTON CASE HOLDER
Case Type: Fired, New Náboj: 22-250 Remington, 250 Savage, 6 mm International Produkt č.: 749001662
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for unmatched accuracy, supporting fired, new, neck, or full-length sized cases.
RIFLE CASE HOLDERS - 243 ACKLEY IMPROVED FIRED CASE HOLDER
Case Type: Fired Náboj: 280 Ackley Improved, 6mm-244 Ackley Improved, 243 Ackley Improved Produkt č.: 749011922
L.E. Wilson Rifle Case Holder ensures precision and uniformity in trimming, reaming, and deburring cases, compatible with fired and new brass for consistent results.
RIFLE CASE HOLDERS - 6MM DASHER CASE HOLDER
Case Type: Fired, New Náboj: 6 mm Dasher, 6mm BRA Produkt č.: 749011926
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, offering uniformity and repeatability for both fired and new cases.
RIFLE CASE HOLDERS - 6MM XC FIRED CASE HOLDER
Case Type: Fired Náboj: 6 mm XC Produkt č.: 749101793
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with both fired and new brass.
RIFLE CASE HOLDERS - 7.5X55MM SWISS NEW CASE HOLDER
Case Type: New Náboj: 7.5 x 55 mm Swiss Produkt č.: 749058034
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming for 6.8mm Remington SPC cases, providing unmatched accuracy and repeatability.
RIFLE CASE HOLDERS - 6.8MM REMINGOTN SPC NEW CASE HOLDER
Case Type: New Náboj: 6.8 mm Remington SPC, 22 Nosler, 224 Valkyrie Produkt č.: 749058033
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for optimal performance.
RIFLE CASE HOLDERS - 22-250 ACKLEY IMPROVED FIRED CASE HOLDER
Case Type: Fired, New Náboj: 22-250 Ackley Improved Produkt č.: 749058037
L.E. Wilson 7.62x39mm Rifle Case Holder ensures precision in trimming and reaming, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 7.62X39MM CASE HOLDER
Case Type: Fired, New Náboj: 7.62 x 39 mm Russian Produkt č.: 749058044
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - 338 NORMA MAGNUM FIRED CASE HOLDER
Case Type: Fired Náboj: 300 Norma Magnum, 338 Norma Magnum Produkt č.: 749017476
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming for 338 Norma Magnum cases, delivering accuracy and uniformity for optimal performance.
RIFLE CASE HOLDERS - 338 NORMA MAGNUM NEW CASE HOLDER
Case Type: New Náboj: 300 Norma Magnum, 338 Norma Magnum Produkt č.: 749017477
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for ultimate accuracy, supporting cases like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - 6MM PPC FAMILY FIRED OVERSIZED CASE HOLDER
Produkt č.: 749014773
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, offering unmatched accuracy and uniformity for all case sizes with a firearm-like support design.
RIFLE CASE HOLDERS - 6MM PPC FAMILY NEW CASE HOLDER
Produkt č.: 749014774
L.E. Wilson Rifle Case Holder ensures precise trimming, reaming, and deburring for ultimate accuracy, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - 444 MARLIN CASE HOLDER
Case Type: Fired, New Náboj: 444 Marlin Produkt č.: 749001199
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, supporting both fired and new brass for optimal results.
RIFLE CASE HOLDERS - 38-40 WINCHESTER CASE HOLDER
Case Type: Fired, New Náboj: 44-40 Winchester, 38-40 Winchester Produkt č.: 749001204
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - 30-40 KRAG FIRED CASE HOLDER
Case Type: Fired Náboj: 30-40 Krag Produkt č.: 749001623
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring for 8x57mm Mauser cases, offering unmatched accuracy and uniformity.
RIFLE CASE HOLDERS - 8X57MM MAUSER FIRED CASE HOLDER
Case Type: Fired Náboj: 8 mm Mauser (8 x 57 mm Mauser) Produkt č.: 749001624
L.E. Wilson Rifle Case Holder ensures precision trimming, reaming, and deburring, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 303 BRITISH CASE HOLDER
Case Type: Fired, New Náboj: 303 British Produkt č.: 749001626
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - SAUM FAMILY FIRED CASE HOLDER
Case Type: Fired Náboj: 300 Remington SAUM, 6.5mm Remington SAUM, 7mm Remington SAUM Produkt č.: 749001632
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming, offering unmatched accuracy and consistency for both fired and new cases.
RIFLE CASE HOLDERS - 300 REMINGTON ULTRA MAGNUM FIRED CASE HOLDER
Case Type: Fired Náboj: 300 Remington Ultra Magnum, 26 Nosler, 28 Nosler, 338 Edge Produkt č.: 749001642
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing ultimate accuracy and repeatability for all case sizes.
RIFLE CASE HOLDERS - 45-70 GOVERNMENT FIRED CASE HOLDER
Case Type: Fired Náboj: 45-70 Government Produkt č.: 749001648
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming cases, supporting the case body like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - BELTED MAGNUM FAMILY FIRED CASE HOLDER
Case Type: Fired Náboj: 458 Winchester Magnum, 300 Winchester Magnum, 338 Winchester Magnum, 7 mm Remington Magnum, 308 Norma Mag, 8 mm Remington Mag, 7 mm STW, 358 Norma Mag, 264 Winchester Magnum Produkt č.: 749001659
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for 308 Winchester cases, delivering accuracy and repeatability for all case types.
RIFLE CASE HOLDERS - 308 WINCHESTER FAMILY NEW CASE HOLDER
Case Type: New Náboj: 308 Winchester, 243 Winchester, 260 Remington Produkt č.: 749001660
L.E. Wilson Rifle Case Holder ensures precision for trimming, reaming, and deburring, offering unmatched accuracy and repeatability for all case sizes.
RIFLE CASE HOLDERS - 30-06 SPRINGFIELD CASE HOLDER
Case Type: Fired, New Náboj: 30-06 Springfield, 270 Winchester, 25-06 Remington Produkt č.: 749001663
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting fired or new brass for optimal performance.
RIFLE CASE HOLDERS - 223 REMINGTON CASE HOLDER
Case Type: Fired, New Náboj: 223 Remington, 222 Remington, 17 Remington Produkt č.: 749001665
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both Fired and New cases for ultimate accuracy.
RIFLE CASE HOLDERS - 308 WINCHESTER FAMILY FIRED CASE HOLDER
Case Type: Fired Náboj: 308 Winchester, 243 Winchester, 7 mm - 08 Remington, 358 Winchester, 260 Remington Produkt č.: 749001666
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, delivering ultimate accuracy and uniformity for fired and new cases.
RIFLE CASE HOLDERS - 6.5 CREEDMOOR FAMILY FIRED CASE HOLDER
Case Type: Fired Náboj: 6.5 Creedmoor, 6mm Creedmoor Produkt č.: 749101791
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming cases, supporting accurate reaming and deburring for optimal performance.
RIFLE CASE HOLDERS - 6.5 CREEDMOOR FAMILY NEW CASE HOLDER
Case Type: New Náboj: 6.5 Creedmoor, 6mm Creedmoor Produkt č.: 749101792
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both new and fired brass for optimal results.
RIFLE CASE HOLDERS - 6MM XC NEW CASE HOLDER
Case Type: New Náboj: 6 mm XC Produkt č.: 749101794
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming for 6.5 Grendel cases, offering unmatched accuracy and repeatability for all case types.
RIFLE CASE HOLDERS - 6.5 GRENDEL NEW CASE HOLDER
Case Type: New Náboj: 6.5 Grendel Produkt č.: 749058032
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for ultimate accuracy.
RIFLE CASE HOLDERS - 300 AAC BLACKOUT CASE HOLDER
Case Type: Fired, New Náboj: 300 AAC Blackout Produkt č.: 749058039
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing unmatched accuracy and consistency for your cases.
RIFLE CASE HOLDERS - 375 RUGER CASE HOLDER
Case Type: Fired, New Náboj: 375 Ruger, 416 Ruger Produkt č.: 749058042
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired and New brass for optimal accuracy.
RIFLE CASE HOLDERS - 6.5MM PRC FIRED CASE HOLDER
Náboj: 6.5 PRC Produkt č.: 749018856
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming cases, supporting them like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - 225 WINCHESTER FIRED CASE HOLDER
Case Type: Fired Náboj: 225 Winchester Produkt č.: 749001611
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing superior accuracy and uniformity for your cases.
RIFLE CASE HOLDERS - 225 WINCHESTER NEW CASE HOLDER
Case Type: New Náboj: 225 Winchester Produkt č.: 749001614
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - WSSM FAMILY FIRED CASE HOLDER
Case Type: Fired Náboj: 223 WSSM (Winchester Super Short Mag), 243 WSSM (Winchester Super Short Mag), 25 WSSM (Winchester Super Short Mag), WSSM Family Produkt č.: 749001636
L.E. Wilson Rifle Case Holder ensures precise trimming, reaming, and deburring, offering unmatched accuracy and repeatability for both fired and new cases.
RIFLE CASE HOLDERS - 284 SHEHANE NEW CASE HOLDER
Produkt č.: 749011924
649 799 69 CZK
-7 %
MSRP 699,00 Kč
649 CZK 649,00 Kč

Ceny včetně DPH 

Produkt č.: 749001664

Výrob. č.: CH-BR

815145027962 Držák nábojnic L.E. Wilson pro pušky drží nábojnici při ořezávání, vyvrtávání zápalek, vyvrtávání krku a odhrotování. Držák nábojnic L.E. Wilson poskytuje maximální přesnost a jednotnost při ořezávání vašich nábojnic. Unikátní design držáku nábojnic podporuje tělo nábojnice, podobně jako komora zbraně. Držáky nábojnic jsou přesně vyráběny pro konzistentní výsledky a opakovatelnost. Držáky FIRED jsou určeny pro nábojnice s krčkem. NOVÉ držáky fungují s novými, nevystřelenými mosazemi nebo nábojnicemi, které byly plně rozměrovány. Pokud není specifikován typ, držák bude vyhovovat jak vystřeleným, novým, krčkovým nebo plně rozměrovaným nábojnicím.
Skladem 3 Počet ks. skladem USA
3,8/5 - 20 Zákazníci
1
2
3
4
5
6
7
8
9
10+
-7 %
MSRP 699,00 Kč
649,00 Kč

Ceny včetně DPH 

1
2
3
4
5
6
7
8
9
10+

Dodací lhůta je přibližně 14-21 dní.

100denní politika vrácení

Dodací lhůta je přibližně 14-21 dní.

100denní politika vrácení
  • Ultimate accuracy and uniformity
  • Supports case body effectively
  • Consistent results and repeatability
Seznam přání Zeptejte se
649 799 69 CZK
Popis Specification Recenze zákazníků Accessories

L.E. WILSON 6MM BR FAMILY FIRED CASE HOLDER

-7 %
MSRP 699,00 Kč
649 CZK 649,00 Kč

Ceny včetně DPH 

1
2
3
4
5
6
7
8
9
10+
-7 %
MSRP 699,00 Kč
649,00 Kč

Ceny včetně DPH 

1
2
3
4
5
6
7
8
9
10+

Dodací lhůta je přibližně 14-21 dní.

100denní politika vrácení

Popis:

Zobrazit originál (anglicky)

Perfektní řešení pro úpravu nábojových nábojnic

Držák nábojnic L.E. Wilson Rifle Case Holder je ideální pro úpravu, vyvrtání otvoru pro zápalku, vyvrtání krčku a odhrotování. Tento držák nábojnic poskytuje maximální přesnost a jednotnost při úpravě vašich nábojnic.

Vlastnosti produktu:

  • Unikátní design: Držák podporuje tělo nábojnice podobně jako komora palného zbraně.
  • Přesná výroba: Držáky jsou precizně vyrobeny pro konzistentní výsledky a opakovatelnost.
  • FIRED Držáky: Určeno pro nábojnice s krčkem.
  • NEW Držáky: Pracují s novým, nevystřeleným mosazným materiálem nebo nábojnicemi, které byly plně zpracovány.

Pokud není specifikován typ, držák bude vyhovovat jak vystřeleným, novým, krčkovým nebo plně zpracovaným nábojnicím.



Atributy

  • Case Type: 
    Fired
  • Náboje: 
    22 BR (Benchrest) Remington
    , 
    6 mm BR Norma
    , 
    30 BR (Benchrest)
  • Dodací hmotnost: 0,091kg
  • Výška přepravy: 28mm
  • Šířka přepravy: 28mm
  • Délka přepravy: 53mm
  • UPC: 815145027962

Detail produktů

Made in USA

Recenze zákazníků

Hodnocení zákazníků (20)

3,8 / 5
Rozhodně doporučuji

Brownells USA Quality 30.4.2018

Typical Wilson quality product. Works great to produce exact length cases.

Doporučuji s výhradami

Brownells USA Limited use with fully sized 308 cases 20.3.2018

Let me say, first, that Wilson products and services are top notch, as is Brownells service. (Wilson trimmers are the most accurate I've ever used. I've trimmed hundreds of rifle cases in various calibers.) This particular case holder works for 243 fully sized (new) and fired brass. It does not work with once fired Lake City or Federal fully sized 308 brass. I used two different Redding presses and standard FL sizing Redding and RCBS dies to check this holder. The sized cases would not extend far enough to be trimmed. I do not have small base dies which reduce the case size to a greater degree to allow more efficient chambering in semi-automatic rifles. I did not use factory new, unfired brass. Based on what I've experienced, I would recommend BOTH case holders to prospective buyers. Rifle chambers vary from Target to Hunting to Military. This is not the fault of the manufacturer or the vendor.















Varianty:

-7 %
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 6MM BR FAMILY FIRED CASE HOLDER
649 CZK 3 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 6 mm BR Norma, 22 BR (Benchrest) Remington, 30 BR (Benchrest) Produkt č.: 749001664
Skladem
649 CZK 3 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with fired and new brass for ultimate accuracy.
RIFLE CASE HOLDERS - 7.63X54R CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired, New Náboj: 7.62 x 54 mm Russian Produkt č.: 749001207
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for consistent results.
RIFLE CASE HOLDERS - 6.8 REMINGTON SPC FIRED CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 6.8 mm Remington SPC, 22 Nosler, 224 Valkyrie Produkt č.: 749001208
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for 6.5 Grendel cases, offering unmatched accuracy and repeatability for all case types.
RIFLE CASE HOLDERS - 6.5 GRENDEL FIRED CASE HOLDER
649 CZK 5 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 6.5 Grendel Produkt č.: 749001209
Skladem
649 CZK 5 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for optimal performance.
RIFLE CASE HOLDERS - 35 REMINGTON FIRED CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 35 Remington Produkt č.: 749001616
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision trimming, reaming, and deburring for ultimate accuracy, supporting fired and new cases alike.
RIFLE CASE HOLDERS - 223 ACKLEY IMPROVED FIRED CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 223 Ackley Produkt č.: 749001619
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming cases, supporting the case body for consistent results and repeatability.
RIFLE CASE HOLDERS - 30 M1 CARBINE FIRED CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 30 Carbine Produkt č.: 749001621
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holders ensure precise trimming, reaming, and deburring for consistent results, fitting both fired and new cases for ultimate accuracy.
RIFLE CASE HOLDERS - SAUM FAMILY NEW CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: New Náboj: 300 Remington SAUM, 6.5mm Remington SAUM, 7mm Remington SAUM Produkt č.: 749001625
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming cases, supporting the case body like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - 30-30 WINCHESTER NEW CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: New Náboj: 30-30 Winchester, 32 Winchester Special, 38-55 Winchester, 30 Remington, 25 Remington, 32 Remington Produkt č.: 749001630
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring, supporting both fired and new cases for ultimate accuracy.
RIFLE CASE HOLDERS - 378 WEATHERBY MAGNUM FIRED CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 378 Weatherby Magnum Produkt č.: 749001631
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming with uniformity, supporting cases like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - 7.5X55MM SWISS FIRED CASE HOLDER
649 CZK 5 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 7.5 x 55 mm Swiss Produkt č.: 749001633
Skladem
649 CZK 5 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming cases, supporting both Fired and New sizes for optimal accuracy.
RIFLE CASE HOLDERS - 375 H&H MAGNUM CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired, New Náboj: 375 H&H Magnum Produkt č.: 749001635
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing ultimate accuracy and uniformity for all case types.
RIFLE CASE HOLDERS - 338 LAPUA MAGNUM CASE HOLDER
649 CZK 3 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired, New Náboj: 338 Lapua Produkt č.: 749001637
Skladem
649 CZK 3 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, compatible with both fired and new brass for consistent results.
RIFLE CASE HOLDERS - 6.5X47MM LAPUA NEW CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč
Skladem
Case Type: New Náboj: 6 x 47 Lapua, 6.5 x 47 mm Lapua Produkt č.: 749001638
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity in trimming, reaming, and deburring cases, fitting both Fired and New brass for consistent results.
RIFLE CASE HOLDERS - 204 RUGER NEW CASE HOLDER
649 CZK 3 649,00 Kč * 699,00 Kč
Skladem
Case Type: New Náboj: 204 Ruger Produkt č.: 749001639
Skladem
649 CZK 3 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with both new and fired brass.
RIFLE CASE HOLDERS - 45-70 GOVERNMENT NEW CASE HOLDER
649 CZK 3 649,00 Kč * 699,00 Kč
Skladem
Case Type: New Náboj: 45-70 Government Produkt č.: 749001640
Skladem
649 CZK 3 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming with a design that mimics a firearm chamber for ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 22 HORNET FIRED CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 22 Hornet Produkt č.: 749001641
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, supporting Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - 30-30 WINCHESTER FIRED CASE HOLDER
649 CZK 4 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 30-30 Winchester, 32 Winchester Special, 38-55 Winchester, 30 Remington, 25 Remington, 32 Remington Produkt č.: 749001643
Skladem
649 CZK 4 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming, supporting neck-sized, fired, or new cases with precision.
RIFLE CASE HOLDERS - 220 SWIFT FIRED CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 220 Swift, 220 Arrow Produkt č.: 749001644
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with fired and new brass.
RIFLE CASE HOLDERS - 221 REMINGTON FIREBALL CASE HOLDER
649 CZK 3 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired, New Náboj: 221 Remington Fireball Produkt č.: 749001645
Skladem
649 CZK 3 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - 222 REMINGTON MAGNUM FIRED CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč
Skladem
Case Type: Fired Náboj: 222 Remington Mag, 6 x 47 (6 mm/222 Mag) Produkt č.: 749001646
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, supporting accuracy with a design mimicking a firearm chamber.
RIFLE CASE HOLDERS - 257 WEATHERBY MAGNUM FIRED CASE HOLDER
Case Type: Fired Náboj: 300 Weatherby Magnum, 257 Weatherby Magnum, 270 Weatherby Magnum, 7 mm Weatherby Magnum, 340 Weatherby Magnum, 375 Weatherby Magnum Produkt č.: 749001647
L.E. Wilson Rifle Case Holder ensures precision trimming, reaming, and deburring for 6.5x55mm Swede cases, offering ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 6.5X55MM SWEDE FIRED CASE HOLDER
Case Type: Fired Produkt č.: 749001649
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, offering ultimate accuracy and repeatability for all case types.
RIFLE CASE HOLDERS - 6MM BR FAMILY NEW CASE HOLDER
Case Type: New Náboj: 7 mm BR (Benchrest) Remington, 6 mm Rem BR (Benchrest), 22 BR (Benchrest) Remington, 30 BR (Benchrest) Remington Produkt č.: 749001650
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, offering consistent results for both Fired and New cases, enhancing your reloading accuracy.
RIFLE CASE HOLDERS - WSM FAMILY NEW CASE HOLDER
Case Type: New Náboj: 300 WSM (Winchester Short Mag), 270 WSM (Winchester Short Mag), 7 mm WSM (Winchester Short Magnum), 325 WSM (Winchester Short Mag) Produkt č.: 749001651
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing uniformity and accuracy for both fired and new cases.
RIFLE CASE HOLDERS - 6.5X47MM LAPUA FIRED CASE HOLDER
Case Type: Fired Náboj: 6 x 47 Lapua, 6.5 x 47 mm Lapua Produkt č.: 749001652
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both new and fired brass for optimal performance.
RIFLE CASE HOLDERS - 220 RUSSIAN NEW CASE HOLDER
Case Type: New Náboj: 220 Russian, 220 Beggs Produkt č.: 749001653
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, fitting Fired, New, Neck, or Full Length sized brass.
RIFLE CASE HOLDERS - 257 ROBERTS FIRED CASE HOLDER
Case Type: Fired Náboj: 257 Roberts, 6 mm/244 Remington, 7 mm Mauser (7 x 57 mm Mauser), 6 mm Remington Produkt č.: 749001654
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for ultimate accuracy and uniformity, compatible with fired, new, neck, and full length sized cases.
RIFLE CASE HOLDERS - BELTED MAGNUM NEW CASE HOLDER
Case Type: New Náboj: 458 Winchester Magnum, 300 Winchester Magnum, 338 Winchester Magnum, 7 mm Remington Magnum, 308 Norma Mag, 8 mm Remington Mag, 7 mm STW, 358 Norma Mag, 264 Winchester Magnum Produkt č.: 749001655
L.E. Wilson Rifle Case Holders ensure precise trimming and reaming with unmatched accuracy, supporting both Fired and New cases for consistent results.
RIFLE CASE HOLDERS - WSM FAMILY FIRED CASE HOLDER
Case Type: Fired Náboj: 300 WSM (Winchester Short Mag), 270 WSM (Winchester Short Mag), 7 mm WSM (Winchester Short Magnum), 325 WSM (Winchester Short Mag) Produkt č.: 749001656
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming with a unique design for ultimate accuracy and repeatability for fired and new cases.
RIFLE CASE HOLDERS - 204 RUGER FIRED CASE HOLDER
Case Type: Fired Náboj: 204 Ruger, 20 Tactical Produkt č.: 749001657
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing ultimate accuracy and repeatability for your cases.
RIFLE CASE HOLDERS - 284 WINCHESTER FIRED CASE HOLDER
Case Type: Fired Náboj: 6.5 x 284 mm Winchester, 284 Winchester, 6 mm - 284 Winchester Produkt č.: 749001658
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, offering unmatched accuracy and repeatability for fired and new cases.
RIFLE CASE HOLDERS - 6MM PPC FAMILY FIRED CASE HOLDER
Case Type: Fired Náboj: 22 PPC, 6 PPC, 20 PPC Produkt č.: 749001661
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass effortlessly.
RIFLE CASE HOLDERS - 22-250 REMINGTON CASE HOLDER
Case Type: Fired, New Náboj: 22-250 Remington, 250 Savage, 6 mm International Produkt č.: 749001662
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for unmatched accuracy, supporting fired, new, neck, or full-length sized cases.
RIFLE CASE HOLDERS - 243 ACKLEY IMPROVED FIRED CASE HOLDER
Case Type: Fired Náboj: 280 Ackley Improved, 6mm-244 Ackley Improved, 243 Ackley Improved Produkt č.: 749011922
L.E. Wilson Rifle Case Holder ensures precision and uniformity in trimming, reaming, and deburring cases, compatible with fired and new brass for consistent results.
RIFLE CASE HOLDERS - 6MM DASHER CASE HOLDER
Case Type: Fired, New Náboj: 6 mm Dasher, 6mm BRA Produkt č.: 749011926
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, offering uniformity and repeatability for both fired and new cases.
RIFLE CASE HOLDERS - 6MM XC FIRED CASE HOLDER
Case Type: Fired Náboj: 6 mm XC Produkt č.: 749101793
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with both fired and new brass.
RIFLE CASE HOLDERS - 7.5X55MM SWISS NEW CASE HOLDER
Case Type: New Náboj: 7.5 x 55 mm Swiss Produkt č.: 749058034
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming for 6.8mm Remington SPC cases, providing unmatched accuracy and repeatability.
RIFLE CASE HOLDERS - 6.8MM REMINGOTN SPC NEW CASE HOLDER
Case Type: New Náboj: 6.8 mm Remington SPC, 22 Nosler, 224 Valkyrie Produkt č.: 749058033
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for optimal performance.
RIFLE CASE HOLDERS - 22-250 ACKLEY IMPROVED FIRED CASE HOLDER
Case Type: Fired, New Náboj: 22-250 Ackley Improved Produkt č.: 749058037
L.E. Wilson 7.62x39mm Rifle Case Holder ensures precision in trimming and reaming, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 7.62X39MM CASE HOLDER
Case Type: Fired, New Náboj: 7.62 x 39 mm Russian Produkt č.: 749058044
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - 338 NORMA MAGNUM FIRED CASE HOLDER
Case Type: Fired Náboj: 300 Norma Magnum, 338 Norma Magnum Produkt č.: 749017476
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming for 338 Norma Magnum cases, delivering accuracy and uniformity for optimal performance.
RIFLE CASE HOLDERS - 338 NORMA MAGNUM NEW CASE HOLDER
Case Type: New Náboj: 300 Norma Magnum, 338 Norma Magnum Produkt č.: 749017477
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for ultimate accuracy, supporting cases like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - 6MM PPC FAMILY FIRED OVERSIZED CASE HOLDER
Produkt č.: 749014773
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, offering unmatched accuracy and uniformity for all case sizes with a firearm-like support design.
RIFLE CASE HOLDERS - 6MM PPC FAMILY NEW CASE HOLDER
Produkt č.: 749014774
L.E. Wilson Rifle Case Holder ensures precise trimming, reaming, and deburring for ultimate accuracy, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - 444 MARLIN CASE HOLDER
Case Type: Fired, New Náboj: 444 Marlin Produkt č.: 749001199
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, supporting both fired and new brass for optimal results.
RIFLE CASE HOLDERS - 38-40 WINCHESTER CASE HOLDER
Case Type: Fired, New Náboj: 44-40 Winchester, 38-40 Winchester Produkt č.: 749001204
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - 30-40 KRAG FIRED CASE HOLDER
Case Type: Fired Náboj: 30-40 Krag Produkt č.: 749001623
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring for 8x57mm Mauser cases, offering unmatched accuracy and uniformity.
RIFLE CASE HOLDERS - 8X57MM MAUSER FIRED CASE HOLDER
Case Type: Fired Náboj: 8 mm Mauser (8 x 57 mm Mauser) Produkt č.: 749001624
L.E. Wilson Rifle Case Holder ensures precision trimming, reaming, and deburring, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 303 BRITISH CASE HOLDER
Case Type: Fired, New Náboj: 303 British Produkt č.: 749001626
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - SAUM FAMILY FIRED CASE HOLDER
Case Type: Fired Náboj: 300 Remington SAUM, 6.5mm Remington SAUM, 7mm Remington SAUM Produkt č.: 749001632
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming, offering unmatched accuracy and consistency for both fired and new cases.
RIFLE CASE HOLDERS - 300 REMINGTON ULTRA MAGNUM FIRED CASE HOLDER
Case Type: Fired Náboj: 300 Remington Ultra Magnum, 26 Nosler, 28 Nosler, 338 Edge Produkt č.: 749001642
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing ultimate accuracy and repeatability for all case sizes.
RIFLE CASE HOLDERS - 45-70 GOVERNMENT FIRED CASE HOLDER
Case Type: Fired Náboj: 45-70 Government Produkt č.: 749001648
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming cases, supporting the case body like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - BELTED MAGNUM FAMILY FIRED CASE HOLDER
Case Type: Fired Náboj: 458 Winchester Magnum, 300 Winchester Magnum, 338 Winchester Magnum, 7 mm Remington Magnum, 308 Norma Mag, 8 mm Remington Mag, 7 mm STW, 358 Norma Mag, 264 Winchester Magnum Produkt č.: 749001659
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for 308 Winchester cases, delivering accuracy and repeatability for all case types.
RIFLE CASE HOLDERS - 308 WINCHESTER FAMILY NEW CASE HOLDER
Case Type: New Náboj: 308 Winchester, 243 Winchester, 260 Remington Produkt č.: 749001660
L.E. Wilson Rifle Case Holder ensures precision for trimming, reaming, and deburring, offering unmatched accuracy and repeatability for all case sizes.
RIFLE CASE HOLDERS - 30-06 SPRINGFIELD CASE HOLDER
Case Type: Fired, New Náboj: 30-06 Springfield, 270 Winchester, 25-06 Remington Produkt č.: 749001663
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting fired or new brass for optimal performance.
RIFLE CASE HOLDERS - 223 REMINGTON CASE HOLDER
Case Type: Fired, New Náboj: 223 Remington, 222 Remington, 17 Remington Produkt č.: 749001665
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both Fired and New cases for ultimate accuracy.
RIFLE CASE HOLDERS - 308 WINCHESTER FAMILY FIRED CASE HOLDER
Case Type: Fired Náboj: 308 Winchester, 243 Winchester, 7 mm - 08 Remington, 358 Winchester, 260 Remington Produkt č.: 749001666
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, delivering ultimate accuracy and uniformity for fired and new cases.
RIFLE CASE HOLDERS - 6.5 CREEDMOOR FAMILY FIRED CASE HOLDER
Case Type: Fired Náboj: 6.5 Creedmoor, 6mm Creedmoor Produkt č.: 749101791
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming cases, supporting accurate reaming and deburring for optimal performance.
RIFLE CASE HOLDERS - 6.5 CREEDMOOR FAMILY NEW CASE HOLDER
Case Type: New Náboj: 6.5 Creedmoor, 6mm Creedmoor Produkt č.: 749101792
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both new and fired brass for optimal results.
RIFLE CASE HOLDERS - 6MM XC NEW CASE HOLDER
Case Type: New Náboj: 6 mm XC Produkt č.: 749101794
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming for 6.5 Grendel cases, offering unmatched accuracy and repeatability for all case types.
RIFLE CASE HOLDERS - 6.5 GRENDEL NEW CASE HOLDER
Case Type: New Náboj: 6.5 Grendel Produkt č.: 749058032
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for ultimate accuracy.
RIFLE CASE HOLDERS - 300 AAC BLACKOUT CASE HOLDER
Case Type: Fired, New Náboj: 300 AAC Blackout Produkt č.: 749058039
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing unmatched accuracy and consistency for your cases.
RIFLE CASE HOLDERS - 375 RUGER CASE HOLDER
Case Type: Fired, New Náboj: 375 Ruger, 416 Ruger Produkt č.: 749058042
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired and New brass for optimal accuracy.
RIFLE CASE HOLDERS - 6.5MM PRC FIRED CASE HOLDER
Náboj: 6.5 PRC Produkt č.: 749018856
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming cases, supporting them like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - 225 WINCHESTER FIRED CASE HOLDER
Case Type: Fired Náboj: 225 Winchester Produkt č.: 749001611
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing superior accuracy and uniformity for your cases.
RIFLE CASE HOLDERS - 225 WINCHESTER NEW CASE HOLDER
Case Type: New Náboj: 225 Winchester Produkt č.: 749001614
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - WSSM FAMILY FIRED CASE HOLDER
Case Type: Fired Náboj: 223 WSSM (Winchester Super Short Mag), 243 WSSM (Winchester Super Short Mag), 25 WSSM (Winchester Super Short Mag), WSSM Family Produkt č.: 749001636
L.E. Wilson Rifle Case Holder ensures precise trimming, reaming, and deburring, offering unmatched accuracy and repeatability for both fired and new cases.
RIFLE CASE HOLDERS - 284 SHEHANE NEW CASE HOLDER
Produkt č.: 749011924

Zákazníci také kupují

Věděli jste?

Informace o výrobci

Odpovědný hospodářský subjekt podle nařízení EU

Brownells Arms s.r.o.
Bílanská 1861/81
76701 Kroměříž
Česká republika
info@brownells.cz

Bezpečnostní pokyny

Jejda! Něco se pokazilo.

Narazili jsme na chybu při načítání obsahu. Obnovte stránku a zkuste to znovu. Pokud problém přetrvává, kontaktujte naši zákaznickou podporu.

Mapa stránky
Produktové Kategorie
Objednávaní
Zákaznícký servis

Připojení

Bezpečné platební metody

CZ-payment-methods2

Obchodní asociace

C.I.P.

Vítejte!

Vítejte v Brownells Česko, vašem cíli pro vše, co souvisí se zbraněmi. S našimi kořeny v opravdové vášni pro zbraně vám přinášíme nepřekonatelný výběr dílů na zbraně, příslušenství ke zbraním, nástroje pro zbrojíře, puškohledy a kolimátory a odborné znalosti.

Ať už chcete zbraň udržovat, opravovat nebo vylepšovat, máme to, co potřebujete!

Pro střelce, od střelců
Sdílíme vaše nadšení a víme přesně, co hledáte, protože jsme součástí komunity.

Obrovský výběr
Od základních věcí až po unikáty, najdete vše pod jednou střechou.

Náš mix tradice a inovace
Nakupujte s pohodlím moderní technologie, podpořené dědictvím zkušeností.

Procházejte naši kolekci a objevte proč jsme důvěryhodným jménem ve střeleckých sportech a lovu.

Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Brownells Switzerland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Brownells France - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. Brownells Sverige - Världens största leverantör av Vapendelar, Vapensmide Verktyg & Skyttetillbehör Brownells Suomi Brownells Italia - Il negozio del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Brownells Polska - Największy na świecie dostawca części broni, narzędzi rusznikarskich & akcesoriów strzeleckich
*
Ceny včetně DPH 

© 2025 Brownells Česká republika
Part of the Brownells Europe Group

Logo Brownells
Klasické zobrazeníKlasické zobrazení Mobilní zobrazeníMobilní zobrazení
Zpět na začátek