Můj účet (Přihlášení)
Košík je prázdný.
0
Košík
telefon Help a kontakt
Doprava zdarma při nákupu nad 5 999,00 Kč
100denní politika vrácení
Můj účet (Přihlášení)
Seznam přání
Košík je prázdný. (0)
Košík
Novinky Novinky
Slevy

Přes 300 000 zákazníků - děkujeme vám!

4,93/5 "Velmi dobré" (1400+ hodnocení)

40 000+ produktů pro lov a střelbu

Přebíjení Příprava nábojnic Zkracování nábojnic Držáky pro úpravu nábojnic L.E. WILSON 22-250 ACKLEY IMPROVED FIRED CASE HOLDER Support

L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for optimal performance.

L.E. WILSON 22-250 ACKLEY IMPROVED FIRED CASE HOLDER

22-250 ACKLEY IMPROVED FIRED CASE HOLDER

815145020406 749058037
Varianty
Filtry:
Variations:

Varianty:

L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for optimal performance.
22-250 ACKLEY IMPROVED FIRED CASE HOLDER 22-250 ACKLEY IMPROVED FIRED CASE HOLDER
699 CZK 0 699,00 Kč *
Předbjednávka
Case Type: Fired, New Náboj: 22-250 Ackley Improved Produkt č.: 749058037
Předbjednávka
699 CZK 0 699,00 Kč *
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with fired and new brass for ultimate accuracy.
7.63X54R CASE HOLDER 7.63X54R CASE HOLDER
699 CZK 3 699,00 Kč * 749,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired, New Náboj: 7.62 x 54 mm Russian Produkt č.: 749001207
Skladem
699 CZK 3 699,00 Kč * 749,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for consistent results.
6.8 REMINGTON SPC FIRED CASE HOLDER 6.8 REMINGTON SPC FIRED CASE HOLDER
699 CZK 2 699,00 Kč * 749,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 6.8 mm Remington SPC, 22 Nosler, 224 Valkyrie Produkt č.: 749001208
Skladem
699 CZK 2 699,00 Kč * 749,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for 6.5 Grendel cases, offering unmatched accuracy and repeatability for all case types.
6.5 GRENDEL FIRED CASE HOLDER 6.5 GRENDEL FIRED CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 6.5 Grendel Produkt č.: 749001209
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precise trimming, reaming, and deburring for ultimate accuracy, compatible with Fired, New, Neck, or Full Length sized cases.
444 MARLIN CASE HOLDER 444 MARLIN CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired, New Náboj: 444 Marlin Produkt č.: 749001199
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, supporting both fired and new brass for optimal results.
38-40 WINCHESTER CASE HOLDER 38-40 WINCHESTER CASE HOLDER
699 CZK 2 699,00 Kč * 749,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired, New Náboj: 44-40 Winchester, 38-40 Winchester Produkt č.: 749001204
Skladem
699 CZK 2 699,00 Kč * 749,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for optimal performance.
35 REMINGTON FIRED CASE HOLDER 35 REMINGTON FIRED CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 35 Remington Produkt č.: 749001616
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming cases, supporting the case body for consistent results and repeatability.
30 M1 CARBINE FIRED CASE HOLDER 30 M1 CARBINE FIRED CASE HOLDER
649 CZK 3 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 30 Carbine Produkt č.: 749001621
Skladem
649 CZK 3 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired, New, Neck, or Full Length sized cases.
30-40 KRAG FIRED CASE HOLDER 30-40 KRAG FIRED CASE HOLDER
699 CZK 1 699,00 Kč * 749,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 30-40 Krag Produkt č.: 749001623
Skladem
699 CZK 1 699,00 Kč * 749,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring for 8x57mm Mauser cases, offering unmatched accuracy and uniformity.
8X57MM MAUSER FIRED CASE HOLDER 8X57MM MAUSER FIRED CASE HOLDER
649 CZK 3 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 8 mm Mauser (8 x 57 mm Mauser) Produkt č.: 749001624
Skladem
649 CZK 3 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision trimming, reaming, and deburring, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
303 BRITISH CASE HOLDER 303 BRITISH CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired, New Náboj: 303 British Produkt č.: 749001626
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming cases, supporting the case body like a firearm chamber for consistent results.
30-30 WINCHESTER NEW CASE HOLDER 30-30 WINCHESTER NEW CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: New Náboj: 30-30 Winchester, 32 Winchester Special, 38-55 Winchester, 30 Remington, 25 Remington, 32 Remington Produkt č.: 749001630
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
SAUM FAMILY FIRED CASE HOLDER SAUM FAMILY FIRED CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 300 Remington SAUM, 6.5mm Remington SAUM, 7mm Remington SAUM Produkt č.: 749001632
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming with uniformity, supporting cases like a firearm chamber for consistent results.
7.5X55MM SWISS FIRED CASE HOLDER 7.5X55MM SWISS FIRED CASE HOLDER
649 CZK 5 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 7.5 x 55 mm Swiss Produkt č.: 749001633
Skladem
649 CZK 5 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming cases, supporting both Fired and New sizes for optimal accuracy.
375 H&H MAGNUM CASE HOLDER 375 H&H MAGNUM CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired, New Náboj: 375 H&H Magnum Produkt č.: 749001635
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, compatible with both fired and new brass for consistent results.
6.5X47MM LAPUA NEW CASE HOLDER 6.5X47MM LAPUA NEW CASE HOLDER
649 CZK 4 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: New Náboj: 6 x 47 Lapua, 6.5 x 47 mm Lapua Produkt č.: 749001638
Skladem
649 CZK 4 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity in trimming, reaming, and deburring cases, fitting both Fired and New brass for consistent results.
204 RUGER NEW CASE HOLDER 204 RUGER NEW CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: New Náboj: 204 Ruger Produkt č.: 749001639
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with both new and fired brass.
45-70 GOVERNMENT NEW CASE HOLDER 45-70 GOVERNMENT NEW CASE HOLDER
649 CZK 4 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: New Náboj: 45-70 Government Produkt č.: 749001640
Skladem
649 CZK 4 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming with a design that mimics a firearm chamber for ultimate accuracy and repeatability.
22 HORNET FIRED CASE HOLDER 22 HORNET FIRED CASE HOLDER
699 CZK 3 699,00 Kč * 749,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 22 Hornet Produkt č.: 749001641
Skladem
699 CZK 3 699,00 Kč * 749,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming, offering unmatched accuracy and consistency for both fired and new cases.
300 REMINGTON ULTRA MAGNUM FIRED CASE HOLDER 300 REMINGTON ULTRA MAGNUM FIRED CASE HOLDER
649 CZK 5 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 300 Remington Ultra Magnum, 26 Nosler, 28 Nosler, 338 Edge Produkt č.: 749001642
Skladem
649 CZK 5 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, supporting Fired, New, Neck, or Full Length sized cases.
30-30 WINCHESTER FIRED CASE HOLDER 30-30 WINCHESTER FIRED CASE HOLDER
699 CZK 5 699,00 Kč * 749,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 30-30 Winchester, 32 Winchester Special, 38-55 Winchester, 30 Remington, 25 Remington, 32 Remington Produkt č.: 749001643
Skladem
699 CZK 5 699,00 Kč * 749,00 Kč
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming, supporting neck-sized, fired, or new cases with precision.
RIFLE CASE HOLDERS - 220 SWIFT FIRED CASE HOLDER
Produkt č.: 749001644
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with fired and new brass.
RIFLE CASE HOLDERS - 221 REMINGTON FIREBALL CASE HOLDER
Produkt č.: 749001645
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - 222 REMINGTON MAGNUM FIRED CASE HOLDER
Produkt č.: 749001646
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, supporting accuracy with a design mimicking a firearm chamber.
RIFLE CASE HOLDERS - 257 WEATHERBY MAGNUM FIRED CASE HOLDER
Produkt č.: 749001647
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing ultimate accuracy and repeatability for all case sizes.
RIFLE CASE HOLDERS - 45-70 GOVERNMENT FIRED CASE HOLDER
Produkt č.: 749001648
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, offering ultimate accuracy and repeatability for all case types.
RIFLE CASE HOLDERS - 6MM BR FAMILY NEW CASE HOLDER
Produkt č.: 749001650
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, offering consistent results for both Fired and New cases, enhancing your reloading accuracy.
RIFLE CASE HOLDERS - WSM FAMILY NEW CASE HOLDER
Produkt č.: 749001651
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing uniformity and accuracy for both fired and new cases.
RIFLE CASE HOLDERS - 6.5X47MM LAPUA FIRED CASE HOLDER
Produkt č.: 749001652
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both new and fired brass for optimal performance.
RIFLE CASE HOLDERS - 220 RUSSIAN NEW CASE HOLDER
Produkt č.: 749001653
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, fitting Fired, New, Neck, or Full Length sized brass.
RIFLE CASE HOLDERS - 257 ROBERTS FIRED CASE HOLDER
Produkt č.: 749001654
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming with a unique design for ultimate accuracy and repeatability for fired and new cases.
RIFLE CASE HOLDERS - 204 RUGER FIRED CASE HOLDER
Produkt č.: 749001657
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing ultimate accuracy and repeatability for your cases.
RIFLE CASE HOLDERS - 284 WINCHESTER FIRED CASE HOLDER
Produkt č.: 749001658
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming cases, supporting the case body like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - BELTED MAGNUM FAMILY FIRED CASE HOLDER
Produkt č.: 749001659
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for 308 Winchester cases, delivering accuracy and repeatability for all case types.
RIFLE CASE HOLDERS - 308 WINCHESTER FAMILY NEW CASE HOLDER
Produkt č.: 749001660
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, offering unmatched accuracy and repeatability for fired and new cases.
RIFLE CASE HOLDERS - 6MM PPC FAMILY FIRED CASE HOLDER
Produkt č.: 749001661
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass effortlessly.
RIFLE CASE HOLDERS - 22-250 REMINGTON CASE HOLDER
Produkt č.: 749001662
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting fired or new brass for optimal performance.
RIFLE CASE HOLDERS - 223 REMINGTON CASE HOLDER
Produkt č.: 749001665
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both Fired and New cases for ultimate accuracy.
RIFLE CASE HOLDERS - 308 WINCHESTER FAMILY FIRED CASE HOLDER
Produkt č.: 749001666
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for unmatched accuracy, supporting fired, new, neck, or full-length sized cases.
RIFLE CASE HOLDERS - 243 ACKLEY IMPROVED FIRED CASE HOLDER
Produkt č.: 749011922
L.E. Wilson Rifle Case Holder ensures precision and uniformity in trimming, reaming, and deburring cases, compatible with fired and new brass for consistent results.
RIFLE CASE HOLDERS - 6MM DASHER CASE HOLDER
Produkt č.: 749011926
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, delivering ultimate accuracy and uniformity for fired and new cases.
RIFLE CASE HOLDERS - 6.5 CREEDMOOR FAMILY FIRED CASE HOLDER
Produkt č.: 749101791
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming cases, supporting accurate reaming and deburring for optimal performance.
RIFLE CASE HOLDERS - 6.5 CREEDMOOR FAMILY NEW CASE HOLDER
Produkt č.: 749101792
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, offering uniformity and repeatability for both fired and new cases.
RIFLE CASE HOLDERS - 6MM XC FIRED CASE HOLDER
Produkt č.: 749101793
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both new and fired brass for optimal results.
RIFLE CASE HOLDERS - 6MM XC NEW CASE HOLDER
Produkt č.: 749101794
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for ultimate accuracy.
RIFLE CASE HOLDERS - 300 AAC BLACKOUT CASE HOLDER
Produkt č.: 749058039
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with both fired and new brass.
RIFLE CASE HOLDERS - 7.5X55MM SWISS NEW CASE HOLDER
Produkt č.: 749058034
L.E. Wilson 7.62x39mm Rifle Case Holder ensures precision in trimming and reaming, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 7.62X39MM CASE HOLDER
Produkt č.: 749058044
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - 338 NORMA MAGNUM FIRED CASE HOLDER
Produkt č.: 749017476
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming for 338 Norma Magnum cases, delivering accuracy and uniformity for optimal performance.
RIFLE CASE HOLDERS - 338 NORMA MAGNUM NEW CASE HOLDER
Produkt č.: 749017477
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for ultimate accuracy, supporting cases like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - 6MM PPC FAMILY FIRED OVERSIZED CASE HOLDER
Produkt č.: 749014773
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, offering unmatched accuracy and uniformity for all case sizes with a firearm-like support design.
RIFLE CASE HOLDERS - 6MM PPC FAMILY NEW CASE HOLDER
Produkt č.: 749014774
L.E. Wilson Rifle Case Holder ensures precision trimming, reaming, and deburring for ultimate accuracy, supporting fired and new cases alike.
RIFLE CASE HOLDERS - 223 ACKLEY IMPROVED FIRED CASE HOLDER
Produkt č.: 749001619
L.E. Wilson Rifle Case Holders ensure precise trimming, reaming, and deburring for consistent results, fitting both fired and new cases for ultimate accuracy.
RIFLE CASE HOLDERS - SAUM FAMILY NEW CASE HOLDER
Produkt č.: 749001625
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring, supporting both fired and new cases for ultimate accuracy.
RIFLE CASE HOLDERS - 378 WEATHERBY MAGNUM FIRED CASE HOLDER
Produkt č.: 749001631
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing ultimate accuracy and uniformity for all case types.
RIFLE CASE HOLDERS - 338 LAPUA MAGNUM CASE HOLDER
Produkt č.: 749001637
L.E. Wilson Rifle Case Holder ensures precision trimming, reaming, and deburring for 6.5x55mm Swede cases, offering ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 6.5X55MM SWEDE FIRED CASE HOLDER
Produkt č.: 749001649
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for ultimate accuracy and uniformity, compatible with fired, new, neck, and full length sized cases.
RIFLE CASE HOLDERS - BELTED MAGNUM NEW CASE HOLDER
Produkt č.: 749001655
L.E. Wilson Rifle Case Holders ensure precise trimming and reaming with unmatched accuracy, supporting both Fired and New cases for consistent results.
RIFLE CASE HOLDERS - WSM FAMILY FIRED CASE HOLDER
Produkt č.: 749001656
L.E. Wilson Rifle Case Holder ensures precision for trimming, reaming, and deburring, offering unmatched accuracy and repeatability for all case sizes.
RIFLE CASE HOLDERS - 30-06 SPRINGFIELD CASE HOLDER
Produkt č.: 749001663
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 6MM BR FAMILY FIRED CASE HOLDER
Produkt č.: 749001664
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming for 6.5 Grendel cases, offering unmatched accuracy and repeatability for all case types.
RIFLE CASE HOLDERS - 6.5 GRENDEL NEW CASE HOLDER
Produkt č.: 749058032
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming for 6.8mm Remington SPC cases, providing unmatched accuracy and repeatability.
RIFLE CASE HOLDERS - 6.8MM REMINGOTN SPC NEW CASE HOLDER
Produkt č.: 749058033
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing unmatched accuracy and consistency for your cases.
RIFLE CASE HOLDERS - 375 RUGER CASE HOLDER
Produkt č.: 749058042
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired and New brass for optimal accuracy.
RIFLE CASE HOLDERS - 6.5MM PRC FIRED CASE HOLDER
Produkt č.: 749018856
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming cases, supporting them like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - 225 WINCHESTER FIRED CASE HOLDER
Produkt č.: 749001611
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing superior accuracy and uniformity for your cases.
RIFLE CASE HOLDERS - 225 WINCHESTER NEW CASE HOLDER
Produkt č.: 749001614
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - WSSM FAMILY FIRED CASE HOLDER
Produkt č.: 749001636
L.E. Wilson Rifle Case Holder ensures precise trimming, reaming, and deburring, offering unmatched accuracy and repeatability for both fired and new cases.
RIFLE CASE HOLDERS - 284 SHEHANE NEW CASE HOLDER
Produkt č.: 749011924
649 749 69 CZK
699 CZK 699,00 Kč

Ceny včetně DPH 

Produkt č.: 749058037

Výrob. č.: CH-2250A

815145020406 Držák nábojnic L.E. Wilson pro pušky drží nábojnici při ořezávání, vyvrtávání zápalek, vyvrtávání krku a odhrotování. Držák nábojnic L.E. Wilson poskytuje maximální přesnost a jednotnost při ořezávání vašich nábojnic. Unikátní design držáku nábojnic podporuje tělo nábojnice, podobně jako komora zbraně. Držáky nábojnic jsou přesně vyráběny pro konzistentní výsledky a opakovatelnost. Držáky FIRED jsou určeny pro nábojnice s krčkem. NOVÉ držáky fungují s novými, nevystřelenými mosazemi nebo nábojnicemi, které byly plně rozměrovány. Pokud není specifikován typ, držák bude vyhovovat jak vystřeleným, novým, krčkovým nebo plně rozměrovaným nábojnicím.
Předbjednávka
3,8/5 - 20 Zákazníci
1
2
3
4
5
6
7
8
9
10+
699,00 Kč

Ceny včetně DPH 

1
2
3
4
5
6
7
8
9
10+

Předbjednávka, dodací lhůta je přibližně 4-12 týdny ze skladu z USA.

100denní politika vrácení

Předbjednávka, dodací lhůta je přibližně 4-12 týdny ze skladu z USA.

100denní politika vrácení
  • Ultimate accuracy and uniformity
  • Supports case body securely
  • Consistent results and repeatability
Seznam přání Zeptejte se
649 749 69 CZK
Popis Specification Recenze zákazníků Accessories

L.E. WILSON 22-250 ACKLEY IMPROVED FIRED CASE HOLDER

699 CZK 699,00 Kč

Ceny včetně DPH 

1
2
3
4
5
6
7
8
9
10+
699,00 Kč

Ceny včetně DPH 

1
2
3
4
5
6
7
8
9
10+

Předbjednávka, dodací lhůta je přibližně 4-12 týdny ze skladu z USA.

100denní politika vrácení

Popis:

Zobrazit originál (anglicky)

Dokonalé držáky nábojových pouzder pro precizní úpravu

Držák nábojových pouzder L.E. Wilson je ideálním pomocníkem pro úpravu, vybírání zápalek, frézování krčku a odhrotování. Tento držák poskytuje maximální přesnost a jednotnost při úpravě vašich nábojových pouzder.

Vlastnosti produktu:

  • Podpora těla pouzdra: Unikátní design držáku podporuje tělo pouzdra, podobně jako komora zbraně.
  • Precizní výroba: Držáky jsou přesně vyráběny pro konzistentní výsledky a opakovatelnost.
  • FIRED Držáky: Určeno pro pouzdra s krčkem.
  • NEW Držáky: Fungují s novými, nevystřelenými mosazemi nebo pouzdry, která byla plně délkově upravena.
  • Univerzální použití: Pokud není specifikováno, držák se hodí pro Fired, New, Neck nebo Full Length sized pouzdra.

Vyberte si držák L.E. Wilson a zajistěte si tak dokonalou přesnost při úpravě vašich nábojových pouzder.



Atributy

  • Case Type: 
    Fired
    , 
    New
  • Náboje: 
    22-250 Ackley Improved
  • Dodací hmotnost: 0,023kg
  • Výška přepravy: 25mm
  • Šířka přepravy: 25mm
  • Délka přepravy: 48mm
  • UPC: 815145020406

Detail produktů

Made in USA

Recenze zákazníků

Hodnocení zákazníků (20)

3,8 / 5
Rozhodně doporučuji

Brownells USA Quality 30.4.2018

Typical Wilson quality product. Works great to produce exact length cases.

Doporučuji s výhradami

Brownells USA Limited use with fully sized 308 cases 20.3.2018

Let me say, first, that Wilson products and services are top notch, as is Brownells service. (Wilson trimmers are the most accurate I've ever used. I've trimmed hundreds of rifle cases in various calibers.) This particular case holder works for 243 fully sized (new) and fired brass. It does not work with once fired Lake City or Federal fully sized 308 brass. I used two different Redding presses and standard FL sizing Redding and RCBS dies to check this holder. The sized cases would not extend far enough to be trimmed. I do not have small base dies which reduce the case size to a greater degree to allow more efficient chambering in semi-automatic rifles. I did not use factory new, unfired brass. Based on what I've experienced, I would recommend BOTH case holders to prospective buyers. Rifle chambers vary from Target to Hunting to Military. This is not the fault of the manufacturer or the vendor.















Varianty:

L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for optimal performance.
22-250 ACKLEY IMPROVED FIRED CASE HOLDER 22-250 ACKLEY IMPROVED FIRED CASE HOLDER
699 CZK 0 699,00 Kč *
Předbjednávka
Case Type: Fired, New Náboj: 22-250 Ackley Improved Produkt č.: 749058037
Předbjednávka
699 CZK 0 699,00 Kč *
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with fired and new brass for ultimate accuracy.
7.63X54R CASE HOLDER 7.63X54R CASE HOLDER
699 CZK 3 699,00 Kč * 749,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired, New Náboj: 7.62 x 54 mm Russian Produkt č.: 749001207
Skladem
699 CZK 3 699,00 Kč * 749,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for consistent results.
6.8 REMINGTON SPC FIRED CASE HOLDER 6.8 REMINGTON SPC FIRED CASE HOLDER
699 CZK 2 699,00 Kč * 749,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 6.8 mm Remington SPC, 22 Nosler, 224 Valkyrie Produkt č.: 749001208
Skladem
699 CZK 2 699,00 Kč * 749,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for 6.5 Grendel cases, offering unmatched accuracy and repeatability for all case types.
6.5 GRENDEL FIRED CASE HOLDER 6.5 GRENDEL FIRED CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 6.5 Grendel Produkt č.: 749001209
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precise trimming, reaming, and deburring for ultimate accuracy, compatible with Fired, New, Neck, or Full Length sized cases.
444 MARLIN CASE HOLDER 444 MARLIN CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired, New Náboj: 444 Marlin Produkt č.: 749001199
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, supporting both fired and new brass for optimal results.
38-40 WINCHESTER CASE HOLDER 38-40 WINCHESTER CASE HOLDER
699 CZK 2 699,00 Kč * 749,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired, New Náboj: 44-40 Winchester, 38-40 Winchester Produkt č.: 749001204
Skladem
699 CZK 2 699,00 Kč * 749,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for optimal performance.
35 REMINGTON FIRED CASE HOLDER 35 REMINGTON FIRED CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 35 Remington Produkt č.: 749001616
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming cases, supporting the case body for consistent results and repeatability.
30 M1 CARBINE FIRED CASE HOLDER 30 M1 CARBINE FIRED CASE HOLDER
649 CZK 3 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 30 Carbine Produkt č.: 749001621
Skladem
649 CZK 3 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired, New, Neck, or Full Length sized cases.
30-40 KRAG FIRED CASE HOLDER 30-40 KRAG FIRED CASE HOLDER
699 CZK 1 699,00 Kč * 749,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 30-40 Krag Produkt č.: 749001623
Skladem
699 CZK 1 699,00 Kč * 749,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring for 8x57mm Mauser cases, offering unmatched accuracy and uniformity.
8X57MM MAUSER FIRED CASE HOLDER 8X57MM MAUSER FIRED CASE HOLDER
649 CZK 3 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 8 mm Mauser (8 x 57 mm Mauser) Produkt č.: 749001624
Skladem
649 CZK 3 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision trimming, reaming, and deburring, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
303 BRITISH CASE HOLDER 303 BRITISH CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired, New Náboj: 303 British Produkt č.: 749001626
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming cases, supporting the case body like a firearm chamber for consistent results.
30-30 WINCHESTER NEW CASE HOLDER 30-30 WINCHESTER NEW CASE HOLDER
649 CZK 1 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: New Náboj: 30-30 Winchester, 32 Winchester Special, 38-55 Winchester, 30 Remington, 25 Remington, 32 Remington Produkt č.: 749001630
Skladem
649 CZK 1 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
SAUM FAMILY FIRED CASE HOLDER SAUM FAMILY FIRED CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 300 Remington SAUM, 6.5mm Remington SAUM, 7mm Remington SAUM Produkt č.: 749001632
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming with uniformity, supporting cases like a firearm chamber for consistent results.
7.5X55MM SWISS FIRED CASE HOLDER 7.5X55MM SWISS FIRED CASE HOLDER
649 CZK 5 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 7.5 x 55 mm Swiss Produkt č.: 749001633
Skladem
649 CZK 5 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming cases, supporting both Fired and New sizes for optimal accuracy.
375 H&H MAGNUM CASE HOLDER 375 H&H MAGNUM CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired, New Náboj: 375 H&H Magnum Produkt č.: 749001635
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, compatible with both fired and new brass for consistent results.
6.5X47MM LAPUA NEW CASE HOLDER 6.5X47MM LAPUA NEW CASE HOLDER
649 CZK 4 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: New Náboj: 6 x 47 Lapua, 6.5 x 47 mm Lapua Produkt č.: 749001638
Skladem
649 CZK 4 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity in trimming, reaming, and deburring cases, fitting both Fired and New brass for consistent results.
204 RUGER NEW CASE HOLDER 204 RUGER NEW CASE HOLDER
649 CZK 2 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: New Náboj: 204 Ruger Produkt č.: 749001639
Skladem
649 CZK 2 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with both new and fired brass.
45-70 GOVERNMENT NEW CASE HOLDER 45-70 GOVERNMENT NEW CASE HOLDER
649 CZK 4 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: New Náboj: 45-70 Government Produkt č.: 749001640
Skladem
649 CZK 4 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming with a design that mimics a firearm chamber for ultimate accuracy and repeatability.
22 HORNET FIRED CASE HOLDER 22 HORNET FIRED CASE HOLDER
699 CZK 3 699,00 Kč * 749,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 22 Hornet Produkt č.: 749001641
Skladem
699 CZK 3 699,00 Kč * 749,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming, offering unmatched accuracy and consistency for both fired and new cases.
300 REMINGTON ULTRA MAGNUM FIRED CASE HOLDER 300 REMINGTON ULTRA MAGNUM FIRED CASE HOLDER
649 CZK 5 649,00 Kč * 699,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 300 Remington Ultra Magnum, 26 Nosler, 28 Nosler, 338 Edge Produkt č.: 749001642
Skladem
649 CZK 5 649,00 Kč * 699,00 Kč
-7 %
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, supporting Fired, New, Neck, or Full Length sized cases.
30-30 WINCHESTER FIRED CASE HOLDER 30-30 WINCHESTER FIRED CASE HOLDER
699 CZK 5 699,00 Kč * 749,00 Kč Ušetříte 50,00 Kč
Skladem
Case Type: Fired Náboj: 30-30 Winchester, 32 Winchester Special, 38-55 Winchester, 30 Remington, 25 Remington, 32 Remington Produkt č.: 749001643
Skladem
699 CZK 5 699,00 Kč * 749,00 Kč
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming, supporting neck-sized, fired, or new cases with precision.
RIFLE CASE HOLDERS - 220 SWIFT FIRED CASE HOLDER
Produkt č.: 749001644
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with fired and new brass.
RIFLE CASE HOLDERS - 221 REMINGTON FIREBALL CASE HOLDER
Produkt č.: 749001645
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - 222 REMINGTON MAGNUM FIRED CASE HOLDER
Produkt č.: 749001646
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, supporting accuracy with a design mimicking a firearm chamber.
RIFLE CASE HOLDERS - 257 WEATHERBY MAGNUM FIRED CASE HOLDER
Produkt č.: 749001647
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing ultimate accuracy and repeatability for all case sizes.
RIFLE CASE HOLDERS - 45-70 GOVERNMENT FIRED CASE HOLDER
Produkt č.: 749001648
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, offering ultimate accuracy and repeatability for all case types.
RIFLE CASE HOLDERS - 6MM BR FAMILY NEW CASE HOLDER
Produkt č.: 749001650
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, offering consistent results for both Fired and New cases, enhancing your reloading accuracy.
RIFLE CASE HOLDERS - WSM FAMILY NEW CASE HOLDER
Produkt č.: 749001651
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing uniformity and accuracy for both fired and new cases.
RIFLE CASE HOLDERS - 6.5X47MM LAPUA FIRED CASE HOLDER
Produkt č.: 749001652
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both new and fired brass for optimal performance.
RIFLE CASE HOLDERS - 220 RUSSIAN NEW CASE HOLDER
Produkt č.: 749001653
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, fitting Fired, New, Neck, or Full Length sized brass.
RIFLE CASE HOLDERS - 257 ROBERTS FIRED CASE HOLDER
Produkt č.: 749001654
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming with a unique design for ultimate accuracy and repeatability for fired and new cases.
RIFLE CASE HOLDERS - 204 RUGER FIRED CASE HOLDER
Produkt č.: 749001657
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing ultimate accuracy and repeatability for your cases.
RIFLE CASE HOLDERS - 284 WINCHESTER FIRED CASE HOLDER
Produkt č.: 749001658
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming cases, supporting the case body like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - BELTED MAGNUM FAMILY FIRED CASE HOLDER
Produkt č.: 749001659
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for 308 Winchester cases, delivering accuracy and repeatability for all case types.
RIFLE CASE HOLDERS - 308 WINCHESTER FAMILY NEW CASE HOLDER
Produkt č.: 749001660
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, offering unmatched accuracy and repeatability for fired and new cases.
RIFLE CASE HOLDERS - 6MM PPC FAMILY FIRED CASE HOLDER
Produkt č.: 749001661
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass effortlessly.
RIFLE CASE HOLDERS - 22-250 REMINGTON CASE HOLDER
Produkt č.: 749001662
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting fired or new brass for optimal performance.
RIFLE CASE HOLDERS - 223 REMINGTON CASE HOLDER
Produkt č.: 749001665
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both Fired and New cases for ultimate accuracy.
RIFLE CASE HOLDERS - 308 WINCHESTER FAMILY FIRED CASE HOLDER
Produkt č.: 749001666
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for unmatched accuracy, supporting fired, new, neck, or full-length sized cases.
RIFLE CASE HOLDERS - 243 ACKLEY IMPROVED FIRED CASE HOLDER
Produkt č.: 749011922
L.E. Wilson Rifle Case Holder ensures precision and uniformity in trimming, reaming, and deburring cases, compatible with fired and new brass for consistent results.
RIFLE CASE HOLDERS - 6MM DASHER CASE HOLDER
Produkt č.: 749011926
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, delivering ultimate accuracy and uniformity for fired and new cases.
RIFLE CASE HOLDERS - 6.5 CREEDMOOR FAMILY FIRED CASE HOLDER
Produkt č.: 749101791
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming cases, supporting accurate reaming and deburring for optimal performance.
RIFLE CASE HOLDERS - 6.5 CREEDMOOR FAMILY NEW CASE HOLDER
Produkt č.: 749101792
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, offering uniformity and repeatability for both fired and new cases.
RIFLE CASE HOLDERS - 6MM XC FIRED CASE HOLDER
Produkt č.: 749101793
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both new and fired brass for optimal results.
RIFLE CASE HOLDERS - 6MM XC NEW CASE HOLDER
Produkt č.: 749101794
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, fitting both fired and new brass for ultimate accuracy.
RIFLE CASE HOLDERS - 300 AAC BLACKOUT CASE HOLDER
Produkt č.: 749058039
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with both fired and new brass.
RIFLE CASE HOLDERS - 7.5X55MM SWISS NEW CASE HOLDER
Produkt č.: 749058034
L.E. Wilson 7.62x39mm Rifle Case Holder ensures precision in trimming and reaming, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 7.62X39MM CASE HOLDER
Produkt č.: 749058044
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - 338 NORMA MAGNUM FIRED CASE HOLDER
Produkt č.: 749017476
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming for 338 Norma Magnum cases, delivering accuracy and uniformity for optimal performance.
RIFLE CASE HOLDERS - 338 NORMA MAGNUM NEW CASE HOLDER
Produkt č.: 749017477
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for ultimate accuracy, supporting cases like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - 6MM PPC FAMILY FIRED OVERSIZED CASE HOLDER
Produkt č.: 749014773
L.E. Wilson Rifle Case Holder ensures precision in trimming and reaming, offering unmatched accuracy and uniformity for all case sizes with a firearm-like support design.
RIFLE CASE HOLDERS - 6MM PPC FAMILY NEW CASE HOLDER
Produkt č.: 749014774
L.E. Wilson Rifle Case Holder ensures precision trimming, reaming, and deburring for ultimate accuracy, supporting fired and new cases alike.
RIFLE CASE HOLDERS - 223 ACKLEY IMPROVED FIRED CASE HOLDER
Produkt č.: 749001619
L.E. Wilson Rifle Case Holders ensure precise trimming, reaming, and deburring for consistent results, fitting both fired and new cases for ultimate accuracy.
RIFLE CASE HOLDERS - SAUM FAMILY NEW CASE HOLDER
Produkt č.: 749001625
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring, supporting both fired and new cases for ultimate accuracy.
RIFLE CASE HOLDERS - 378 WEATHERBY MAGNUM FIRED CASE HOLDER
Produkt č.: 749001631
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing ultimate accuracy and uniformity for all case types.
RIFLE CASE HOLDERS - 338 LAPUA MAGNUM CASE HOLDER
Produkt č.: 749001637
L.E. Wilson Rifle Case Holder ensures precision trimming, reaming, and deburring for 6.5x55mm Swede cases, offering ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 6.5X55MM SWEDE FIRED CASE HOLDER
Produkt č.: 749001649
L.E. Wilson Rifle Case Holder ensures precise trimming and reaming for ultimate accuracy and uniformity, compatible with fired, new, neck, and full length sized cases.
RIFLE CASE HOLDERS - BELTED MAGNUM NEW CASE HOLDER
Produkt č.: 749001655
L.E. Wilson Rifle Case Holders ensure precise trimming and reaming with unmatched accuracy, supporting both Fired and New cases for consistent results.
RIFLE CASE HOLDERS - WSM FAMILY FIRED CASE HOLDER
Produkt č.: 749001656
L.E. Wilson Rifle Case Holder ensures precision for trimming, reaming, and deburring, offering unmatched accuracy and repeatability for all case sizes.
RIFLE CASE HOLDERS - 30-06 SPRINGFIELD CASE HOLDER
Produkt č.: 749001663
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming, supporting cases like a firearm chamber for ultimate accuracy and repeatability.
RIFLE CASE HOLDERS - 6MM BR FAMILY FIRED CASE HOLDER
Produkt č.: 749001664
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming for 6.5 Grendel cases, offering unmatched accuracy and repeatability for all case types.
RIFLE CASE HOLDERS - 6.5 GRENDEL NEW CASE HOLDER
Produkt č.: 749058032
L.E. Wilson Rifle Case Holder ensures precision trimming and reaming for 6.8mm Remington SPC cases, providing unmatched accuracy and repeatability.
RIFLE CASE HOLDERS - 6.8MM REMINGOTN SPC NEW CASE HOLDER
Produkt č.: 749058033
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing unmatched accuracy and consistency for your cases.
RIFLE CASE HOLDERS - 375 RUGER CASE HOLDER
Produkt č.: 749058042
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming, reaming, and deburring cases, compatible with Fired and New brass for optimal accuracy.
RIFLE CASE HOLDERS - 6.5MM PRC FIRED CASE HOLDER
Produkt č.: 749018856
L.E. Wilson Rifle Case Holder ensures ultimate accuracy and uniformity for trimming cases, supporting them like a firearm chamber for consistent results.
RIFLE CASE HOLDERS - 225 WINCHESTER FIRED CASE HOLDER
Produkt č.: 749001611
L.E. Wilson Rifle Case Holder ensures precision in trimming, reaming, and deburring, providing superior accuracy and uniformity for your cases.
RIFLE CASE HOLDERS - 225 WINCHESTER NEW CASE HOLDER
Produkt č.: 749001614
L.E. Wilson Rifle Case Holder ensures precision and uniformity for trimming and reaming cases, compatible with Fired, New, Neck, or Full Length sized cases.
RIFLE CASE HOLDERS - WSSM FAMILY FIRED CASE HOLDER
Produkt č.: 749001636
L.E. Wilson Rifle Case Holder ensures precise trimming, reaming, and deburring, offering unmatched accuracy and repeatability for both fired and new cases.
RIFLE CASE HOLDERS - 284 SHEHANE NEW CASE HOLDER
Produkt č.: 749011924

Zákazníci také kupují

Věděli jste?

Informace o výrobci

Odpovědný hospodářský subjekt podle nařízení EU

Brownells Arms s.r.o.
Bílanská 1861/81
76701 Kroměříž
Česká republika
info@brownells.cz

Bezpečnostní pokyny

Jejda! Něco se pokazilo.

Narazili jsme na chybu při načítání obsahu. Obnovte stránku a zkuste to znovu. Pokud problém přetrvává, kontaktujte naši zákaznickou podporu.

Mapa stránky
Produktové Kategorie
Objednávaní
Zákaznícký servis

Připojení

Bezpečné platební metody

CZ-payment-methods2

Obchodní asociace

C.I.P.

Vítejte!

Vítejte v Brownells Česko, vašem cíli pro vše, co souvisí se zbraněmi. S našimi kořeny v opravdové vášni pro zbraně vám přinášíme nepřekonatelný výběr dílů na zbraně, příslušenství ke zbraním, nástroje pro zbrojíře, puškohledy a kolimátory a odborné znalosti.

Ať už chcete zbraň udržovat, opravovat nebo vylepšovat, máme to, co potřebujete!

Pro střelce, od střelců
Sdílíme vaše nadšení a víme přesně, co hledáte, protože jsme součástí komunity.

Obrovský výběr
Od základních věcí až po unikáty, najdete vše pod jednou střechou.

Náš mix tradice a inovace
Nakupujte s pohodlím moderní technologie, podpořené dědictvím zkušeností.

Procházejte naši kolekci a objevte proč jsme důvěryhodným jménem ve střeleckých sportech a lovu.

Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Brownells Switzerland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Brownells France - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. Brownells Sverige - Världens största leverantör av Vapendelar, Vapensmide Verktyg & Skyttetillbehör Brownells Suomi Brownells Italia - Il negozio del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Brownells Polska - Największy na świecie dostawca części broni, narzędzi rusznikarskich & akcesoriów strzeleckich
*
Ceny včetně DPH 

© 2026 Brownells Česká republika
Part of the Brownells Europe Group

Logo Brownells
Klasické zobrazeníKlasické zobrazení Mobilní zobrazeníMobilní zobrazení
Zpět na začátek