Můj účet (Přihlášení)
Košík je prázdný.
0
Košík
telefon Help a kontakt
Doprava zdarma při nákupu nad 5 999,00 Kč
100denní politika vrácení
Můj účet (Přihlášení)
Seznam přání
Košík je prázdný. (0)
Košík
Novinky Novinky
Slevy

Přes 300 000 zákazníků - děkujeme vám!

4,93/5 "Velmi dobré" (1400+ hodnocení)

40 000+ produktů pro lov a střelbu

Přebíjení Přebíjecí matrice Objímky pro úpravu krčku L.E. WILSON STEEL NECK SIZER DIE BUSHING .325 Support

Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and performance for your cartridges.
-5 %

L.E. WILSON STEEL NECK SIZER DIE BUSHING .325

STEEL NECK SIZER DIE BUSHING .325

815145025159 749002407
Varianty
Filtry:
Diameter (in)
.242
.243
.244
.245
.246
.247
.248
.249
.250
.251
.252
.256
.257
.258
.259
.261
.262
.263
.264
.265
.266
.267
.268
.269
.270
.284
.285
.286
.287
.288
.289
.290
.291
.292
.293
.305
.307
.308
.309
.310
.311
.312
.324
.325
.326
.327
.328
.329
.330
.331
.332
.333
.334
.335
.336
.337
Variations:

Varianty:

-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and performance for your cartridges.
STEEL NECK SIZER DIE BUSHING .325 STEEL NECK SIZER DIE BUSHING .325
899 CZK 3 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .325 Produkt č.: 749002407
Skladem
899 CZK 3 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushing from L.E. Wilson, offering precise sizing in .001" increments for optimal neck tension and fine-tuning adjustments.
STEEL NECK SIZER DIE BUSHING .263 STEEL NECK SIZER DIE BUSHING .263
899 CZK 1 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .263 Produkt č.: 749002427
Skladem
899 CZK 1 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck sizing bushings from L.E. Wilson in .001" increments provide precise control for optimal neck tension and bullet hold.
STEEL NECK SIZER DIE BUSHING .259 STEEL NECK SIZER DIE BUSHING .259
899 CZK 2 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .259 Produkt č.: 749002479
Skladem
899 CZK 2 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001” increments, ideal for fine-tuning neck tension and ensuring optimal bullet hold.
STEEL NECK SIZER DIE BUSHING .309 STEEL NECK SIZER DIE BUSHING .309
899 CZK 2 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .309 Produkt č.: 749002371
Skladem
899 CZK 2 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and customization for your cartridges.
STEEL NECK SIZER DIE BUSHING .248 STEEL NECK SIZER DIE BUSHING .248
899 CZK 3 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .248 Produkt č.: 749002477
Skladem
899 CZK 3 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson in .001" increments ensure precise sizing and optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .329 STEEL NECK SIZER DIE BUSHING .329
899 CZK 1 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .329 Produkt č.: 749002432
Skladem
899 CZK 1 899,00 Kč * 949,00 Kč
-5 %
L.E. Wilson's hardened stainless steel neck bushings offer precise sizing in .001” increments, ensuring optimal neck tension and fine-tuning for your reloading needs.
STEEL NECK SIZER DIE BUSHING .337 STEEL NECK SIZER DIE BUSHING .337
899 CZK 4 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .337 Produkt č.: 749002408
Skladem
899 CZK 4 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson, available in .001" increments for precise neck sizing and optimal bullet retention.
STEEL NECK SIZER DIE BUSHING .336 STEEL NECK SIZER DIE BUSHING .336
899 CZK 3 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .336 Produkt č.: 749002443
Skladem
899 CZK 3 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson, available in .001" increments for precise sizing and optimal neck tension in your reloading process.
STEEL NECK SIZER DIE BUSHING .270 STEEL NECK SIZER DIE BUSHING .270
899 CZK 1 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .270 Produkt č.: 749002452
Skladem
899 CZK 1 899,00 Kč * 949,00 Kč
-5 %
L.E. Wilson's hardened stainless steel neck bushings offer precise sizing in .001" increments, ensuring optimal neck tension for reliable bullet retention.
STEEL NECK SIZER DIE BUSHING .311 STEEL NECK SIZER DIE BUSHING .311
899 CZK 1 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .311 Produkt č.: 749002405
Skladem
899 CZK 1 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .335 STEEL NECK SIZER DIE BUSHING .335
899 CZK 4 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .335 Produkt č.: 749002467
Skladem
899 CZK 4 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel NECK SIZING BUSHINGS in .001" increments for precise sizing, ensuring optimal neck tension and compatibility with L.E. Wilson dies.
STEEL NECK SIZER DIE BUSHING .290 STEEL NECK SIZER DIE BUSHING .290
899 CZK 5 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .290 Produkt č.: 749002429
Skladem
899 CZK 5 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and custom fit for your cartridges.
STEEL NECK SIZER DIE BUSHING .293 STEEL NECK SIZER DIE BUSHING .293
899 CZK 4 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .293 Produkt č.: 749002360
Skladem
899 CZK 4 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson allow precise sizing with .001" increments, ensuring optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .284 STEEL NECK SIZER DIE BUSHING .284
899 CZK 1 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .284 Produkt č.: 749002359
Skladem
899 CZK 1 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings in .001" increments for precise sizing, ensuring optimal neck tension and compatibility with L.E. Wilson dies.
STEEL NECK SIZER DIE BUSHING .308 STEEL NECK SIZER DIE BUSHING .308
899 CZK 3 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .308 Produkt č.: 749002370
Skladem
899 CZK 3 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson provide precise sizing in .001” increments, ensuring optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .268 STEEL NECK SIZER DIE BUSHING .268
899 CZK 2 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .268 Produkt č.: 749002465
Skladem
899 CZK 2 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .326 STEEL NECK SIZER DIE BUSHING .326
899 CZK 3 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .326 Produkt č.: 749002439
Skladem
899 CZK 3 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .264 STEEL NECK SIZER DIE BUSHING .264
899 CZK 3 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .264 Produkt č.: 749002448
Skladem
899 CZK 3 899,00 Kč * 949,00 Kč
-5 %
L.E. Wilson's hardened stainless steel neck bushings offer precise sizing in .001" increments, ensuring optimal neck tension and compatibility with Redding specs.
STEEL NECK SIZER DIE BUSHING .288 STEEL NECK SIZER DIE BUSHING .288
899 CZK 5 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .288 Produkt č.: 749002400
Skladem
899 CZK 5 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .324 STEEL NECK SIZER DIE BUSHING .324
899 CZK 3 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .324 Produkt č.: 749002374
Skladem
899 CZK 3 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .291 STEEL NECK SIZER DIE BUSHING .291
899 CZK 5 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .291 Produkt č.: 749002402
Skladem
899 CZK 5 899,00 Kč * 949,00 Kč
Hardened stainless steel neck bushing in .001" increments for precise sizing; ideal for fine-tuning neck tension and ensuring reliable bullet hold.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .256
Diameter (in): .256 Produkt č.: 749002424
L.E. Wilson NECK SIZING BUSHINGS offer precise .001" increments, hardened stainless steel durability, and adjustable sizing for optimal neck tension.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .332
Diameter (in): .332 Produkt č.: 749002442
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .261
Diameter (in): .261 Produkt č.: 749002425
Hardened stainless steel neck bushings from L.E. Wilson ensure precise sizing in .001" increments, perfect for fine-tuning neck tension and enhancing accuracy.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .265
Diameter (in): .265 Produkt č.: 749002438
L.E. Wilson's hardened stainless steel neck bushings offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .330
Diameter (in): .330 Produkt č.: 749002440
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for reliable bullet hold.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .327
Diameter (in): .327 Produkt č.: 749002430
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and fine-tuning for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .245
Diameter (in): .245 Produkt č.: 749002475
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .267
Diameter (in): .267 Produkt č.: 749002450
Hardened stainless steel neck sizing bushings from L.E. Wilson offer precision in .001" increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .266
Diameter (in): .266 Produkt č.: 749002449
Hardened stainless steel neck bushings in .001” increments for precise sizing, ensuring optimal neck tension and compatibility with L.E. Wilson dies.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .333
Diameter (in): .333 Produkt č.: 749002453
L.E. Wilson hardened stainless steel neck bushings offer precise sizing in .001" increments, ensuring optimal neck tension and fine-tuning for your reloading needs.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .247
Diameter (in): .247 Produkt č.: 749002445
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .331
Diameter (in): .331 Produkt č.: 749002441
.246 NECK SIZING BUSHINGS from L.E. Wilson offer precise sizing with hardened stainless steel, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .246
Diameter (in): .246 Produkt č.: 749002476
Hardened stainless steel neck bushings in .001" increments for precise sizing, ensuring optimal neck tension and compatibility with L.E. Wilson dies.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .285
Diameter (in): .285 Produkt č.: 749002397
L.E. Wilson's hardened stainless steel neck bushings offer precise sizing in .001" increments, ensuring optimal neck tension and compatibility with Redding dies.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .292
Diameter (in): .292 Produkt č.: 749002403
Hardened stainless steel neck bushing from L.E. Wilson allows precise sizing in .001" increments, ensuring optimal neck tension and accuracy for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .243
Diameter (in): .243 Produkt č.: 749002463
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and compatibility with Redding dies.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .251
Diameter (in): .251 Produkt č.: 749002393
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing with .001" increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .242
Diameter (in): .242 Produkt č.: 749002462
Hardened stainless steel neck bushings from L.E. Wilson ensure precise sizing with .001" increments, ideal for fine-tuning neck tension and enhancing accuracy.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .249
Diameter (in): .249 Produkt č.: 749002446
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing with .001" increments, ideal for achieving optimal neck tension and bullet hold.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .334
Diameter (in): .334 Produkt č.: 749002466
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001” increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .244
Diameter (in): .244 Produkt č.: 749002474
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001” increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .258
Diameter (in): .258 Produkt č.: 749002483
Hardened stainless steel neck bushings from L.E. Wilson ensure precise sizing in .001" increments, allowing for optimal neck tension and fine-tuning capabilities.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .262
Diameter (in): .262 Produkt č.: 749002426
L.E. Wilson's hardened stainless steel neck bushings offer precise sizing in .001" increments, ensuring optimal neck tension and fine-tuning for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .250
Diameter (in): .250 Produkt č.: 749002423
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .310
Diameter (in): .310 Produkt č.: 749002404
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and reliable performance.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .286
Diameter (in): .286 Produkt č.: 749002398
Hardened stainless steel neck sizing bushing from L.E. Wilson offers precise sizing in .001" increments, ensuring optimal neck tension and reliability for your ammunition.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .269
Diameter (in): .269 Produkt č.: 749002451
L.E. Wilson's hardened stainless steel neck sizing bushings provide precise .001" increments for optimal neck tension and fine-tuning, ensuring reliable performance.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .289
Diameter (in): .289 Produkt č.: 749002401
Hardened stainless steel neck sizing bushings from L.E. Wilson offer precise .001" increments for optimal neck tension and fine-tuning, ensuring reliable performance.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .287
Diameter (in): .287 Produkt č.: 749002399
L.E. Wilson NECK SIZING BUSHINGS in .001" increments ensure precise neck tension, with options for fine-tuning and emergency sizing for hardened brass.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .257
Diameter (in): .257 Produkt č.: 749002464
Hardened stainless steel neck bushings from L.E. Wilson ensure precise sizing in .001" increments, allowing for optimal neck tension and fine-tuning for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .252
Diameter (in): .252 Produkt č.: 749002348
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and fine-tuning for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .312
Diameter (in): .312 Produkt č.: 749002406
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and reliable bullet hold.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .307
Diameter (in): .307 Produkt č.: 749002369
Kovové neck sizing bushings L.E. Wilson v .001" krocích umožňují přesné tvarování nábojnic s možností jemného doladění pro optimální napětí.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .328
Diameter (in): .328 Produkt č.: 749002431
Hardened stainless steel neck bushings in .001" increments for precise sizing, ensuring optimal neck tension and compatibility with L.E. Wilson dies.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .305
Diameter (in): .305 Produkt č.: 749002367
899 949 56 CZK
-5 %
MSRP 949,00 Kč
899 CZK 899,00 Kč

Ceny včetně DPH 

Produkt č.: 749002407

Výrob. č.: B-325

815145025159 Zpevněná nerezová ocelová krčková objímka od L.E. Wilson. Wilson vyrábí své objímky v krocích po .001”. Velikost uvedená na objímce se vztahuje na střed objímky, která je vyvrtaná s kuželem .003”. Protože krček nábojnice dosahuje pouze do středu, lze dosáhnout mírně těsnějšího rozměru otočením objímky, přičemž označení směřuje k nábojnici (označení směřuje dolů). Toto je především nouzový krok, který je třeba učinit, pokud se mosaz zpevnila, vrací se více zpět a již nedrží projektil; nebo pro jemné doladění rozměru, aby se dosáhlo menšího dodatečného „stlačení“ než při použití další menší objímky běžným způsobem. Vyrobeno podle podobných specifikací jako krčkové objímky Redding. Nepasuje na dies Forster nebo RCBS. Tip od Brownells Gun Tech™: Existují dva způsoby, jak vybrat ocelové krčkové objímky, které potřebujete: (1) Změřte vnější průměr krčku vašeho nabitého náboje a odečtěte .002" až .003". To umožňuje přibližně .001" mosazi, aby se vrátila zpět pro správné napětí krčku. (2) Můžete také změřit tloušťku stěny krčku vaší nábojnice, vynásobit dvěma, přidat průměr vašeho projektilu a odečíst .002" až .003".
Skladem 3 Počet ks. skladem USA
Buďte první, kdo ohodnotí tento produkt
1
2
3
4
5
6
7
8
9
10+
-5 %
MSRP 949,00 Kč
899,00 Kč

Ceny včetně DPH 

1
2
3
4
5
6
7
8
9
10+

Dodací lhůta je přibližně 14-21 dní.

100denní politika vrácení
Zákonná Záruka

Dodací lhůta je přibližně 14-21 dní.

100denní politika vrácení
Zákonná Záruka
  • Precision sizing in .001” increments
  • Hardened stainless steel construction
  • Compatible with L.E. Wilson dies
Seznam přání Zeptejte se
899 949 56 CZK
Popis Specification Recenze zákazníků Accessories

L.E. WILSON STEEL NECK SIZER DIE BUSHING .325

-5 %
MSRP 949,00 Kč
899 CZK 899,00 Kč

Ceny včetně DPH 

1
2
3
4
5
6
7
8
9
10+
-5 %
MSRP 949,00 Kč
899,00 Kč

Ceny včetně DPH 

1
2
3
4
5
6
7
8
9
10+

Dodací lhůta je přibližně 14-21 dní.

100denní politika vrácení
Zákonná Záruka

Popis:

Zobrazit originál (anglicky)

Optimal sizing for precision shooting with L.E. Wilson's neck bushings.

Discover the NECK SIZING BUSHINGS, STEEL NECK SIZER DIE BUSHING .325 from L.E. Wilson, designed for precision and reliability in your reloading process.

Product Features:

  • Material: Hardened stainless steel for durability.
  • Increment Sizes: Available in .001” increments.
  • Taper: Features a .003” taper for optimal sizing.
  • Versatile Usage: Can be flipped for tighter sizing if necessary.
  • Compatibility: Made to similar specifications as Redding neck bushings; not interchangeable with Forster or RCBS dies.

Usage Tips:

For best results, consider the following methods when selecting the right steel neck bushing:

  1. Measure the outside neck diameter of your loaded cartridge and subtract .002" to .003". This allows approximately .001" of brass to spring back for correct neck tension.
  2. Measure the neck wall thickness of your case, multiply by two, add the diameter of your bullet, and subtract .002" to .003".

Brownells Gun Tech™ Tip: This sizing technique is particularly useful if the brass has hardened and is springing back more than desired, ensuring your bullets are held securely.



Atributy

  • Diameter (in): 
    .325
  • Dodací hmotnost: 0,045kg
  • Výška přepravy: 3mm
  • Šířka přepravy: 83mm
  • Délka přepravy: 146mm
  • UPC: 815145025159

Detail produktů

Made in USA

Recenze zákazníků

Hodnocení zákazníků (0)

0 / 5

Varianty:

-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and performance for your cartridges.
STEEL NECK SIZER DIE BUSHING .325 STEEL NECK SIZER DIE BUSHING .325
899 CZK 3 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .325 Produkt č.: 749002407
Skladem
899 CZK 3 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushing from L.E. Wilson, offering precise sizing in .001" increments for optimal neck tension and fine-tuning adjustments.
STEEL NECK SIZER DIE BUSHING .263 STEEL NECK SIZER DIE BUSHING .263
899 CZK 1 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .263 Produkt č.: 749002427
Skladem
899 CZK 1 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck sizing bushings from L.E. Wilson in .001" increments provide precise control for optimal neck tension and bullet hold.
STEEL NECK SIZER DIE BUSHING .259 STEEL NECK SIZER DIE BUSHING .259
899 CZK 2 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .259 Produkt č.: 749002479
Skladem
899 CZK 2 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001” increments, ideal for fine-tuning neck tension and ensuring optimal bullet hold.
STEEL NECK SIZER DIE BUSHING .309 STEEL NECK SIZER DIE BUSHING .309
899 CZK 2 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .309 Produkt č.: 749002371
Skladem
899 CZK 2 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and customization for your cartridges.
STEEL NECK SIZER DIE BUSHING .248 STEEL NECK SIZER DIE BUSHING .248
899 CZK 3 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .248 Produkt č.: 749002477
Skladem
899 CZK 3 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson in .001" increments ensure precise sizing and optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .329 STEEL NECK SIZER DIE BUSHING .329
899 CZK 1 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .329 Produkt č.: 749002432
Skladem
899 CZK 1 899,00 Kč * 949,00 Kč
-5 %
L.E. Wilson's hardened stainless steel neck bushings offer precise sizing in .001” increments, ensuring optimal neck tension and fine-tuning for your reloading needs.
STEEL NECK SIZER DIE BUSHING .337 STEEL NECK SIZER DIE BUSHING .337
899 CZK 4 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .337 Produkt č.: 749002408
Skladem
899 CZK 4 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson, available in .001" increments for precise neck sizing and optimal bullet retention.
STEEL NECK SIZER DIE BUSHING .336 STEEL NECK SIZER DIE BUSHING .336
899 CZK 3 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .336 Produkt č.: 749002443
Skladem
899 CZK 3 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson, available in .001" increments for precise sizing and optimal neck tension in your reloading process.
STEEL NECK SIZER DIE BUSHING .270 STEEL NECK SIZER DIE BUSHING .270
899 CZK 1 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .270 Produkt č.: 749002452
Skladem
899 CZK 1 899,00 Kč * 949,00 Kč
-5 %
L.E. Wilson's hardened stainless steel neck bushings offer precise sizing in .001" increments, ensuring optimal neck tension for reliable bullet retention.
STEEL NECK SIZER DIE BUSHING .311 STEEL NECK SIZER DIE BUSHING .311
899 CZK 1 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .311 Produkt č.: 749002405
Skladem
899 CZK 1 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .335 STEEL NECK SIZER DIE BUSHING .335
899 CZK 4 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .335 Produkt č.: 749002467
Skladem
899 CZK 4 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel NECK SIZING BUSHINGS in .001" increments for precise sizing, ensuring optimal neck tension and compatibility with L.E. Wilson dies.
STEEL NECK SIZER DIE BUSHING .290 STEEL NECK SIZER DIE BUSHING .290
899 CZK 5 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .290 Produkt č.: 749002429
Skladem
899 CZK 5 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and custom fit for your cartridges.
STEEL NECK SIZER DIE BUSHING .293 STEEL NECK SIZER DIE BUSHING .293
899 CZK 4 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .293 Produkt č.: 749002360
Skladem
899 CZK 4 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson allow precise sizing with .001" increments, ensuring optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .284 STEEL NECK SIZER DIE BUSHING .284
899 CZK 1 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .284 Produkt č.: 749002359
Skladem
899 CZK 1 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings in .001" increments for precise sizing, ensuring optimal neck tension and compatibility with L.E. Wilson dies.
STEEL NECK SIZER DIE BUSHING .308 STEEL NECK SIZER DIE BUSHING .308
899 CZK 3 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .308 Produkt č.: 749002370
Skladem
899 CZK 3 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson provide precise sizing in .001” increments, ensuring optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .268 STEEL NECK SIZER DIE BUSHING .268
899 CZK 2 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .268 Produkt č.: 749002465
Skladem
899 CZK 2 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .326 STEEL NECK SIZER DIE BUSHING .326
899 CZK 3 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .326 Produkt č.: 749002439
Skladem
899 CZK 3 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .264 STEEL NECK SIZER DIE BUSHING .264
899 CZK 3 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .264 Produkt č.: 749002448
Skladem
899 CZK 3 899,00 Kč * 949,00 Kč
-5 %
L.E. Wilson's hardened stainless steel neck bushings offer precise sizing in .001" increments, ensuring optimal neck tension and compatibility with Redding specs.
STEEL NECK SIZER DIE BUSHING .288 STEEL NECK SIZER DIE BUSHING .288
899 CZK 5 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .288 Produkt č.: 749002400
Skladem
899 CZK 5 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .324 STEEL NECK SIZER DIE BUSHING .324
899 CZK 3 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .324 Produkt č.: 749002374
Skladem
899 CZK 3 899,00 Kč * 949,00 Kč
-5 %
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
STEEL NECK SIZER DIE BUSHING .291 STEEL NECK SIZER DIE BUSHING .291
899 CZK 5 899,00 Kč * 949,00 Kč
Skladem
Diameter (in): .291 Produkt č.: 749002402
Skladem
899 CZK 5 899,00 Kč * 949,00 Kč
Hardened stainless steel neck bushing in .001" increments for precise sizing; ideal for fine-tuning neck tension and ensuring reliable bullet hold.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .256
Diameter (in): .256 Produkt č.: 749002424
L.E. Wilson NECK SIZING BUSHINGS offer precise .001" increments, hardened stainless steel durability, and adjustable sizing for optimal neck tension.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .332
Diameter (in): .332 Produkt č.: 749002442
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .261
Diameter (in): .261 Produkt č.: 749002425
Hardened stainless steel neck bushings from L.E. Wilson ensure precise sizing in .001" increments, perfect for fine-tuning neck tension and enhancing accuracy.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .265
Diameter (in): .265 Produkt č.: 749002438
L.E. Wilson's hardened stainless steel neck bushings offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .330
Diameter (in): .330 Produkt č.: 749002440
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for reliable bullet hold.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .327
Diameter (in): .327 Produkt č.: 749002430
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and fine-tuning for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .245
Diameter (in): .245 Produkt č.: 749002475
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .267
Diameter (in): .267 Produkt č.: 749002450
Hardened stainless steel neck sizing bushings from L.E. Wilson offer precision in .001" increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .266
Diameter (in): .266 Produkt č.: 749002449
Hardened stainless steel neck bushings in .001” increments for precise sizing, ensuring optimal neck tension and compatibility with L.E. Wilson dies.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .333
Diameter (in): .333 Produkt č.: 749002453
L.E. Wilson hardened stainless steel neck bushings offer precise sizing in .001" increments, ensuring optimal neck tension and fine-tuning for your reloading needs.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .247
Diameter (in): .247 Produkt č.: 749002445
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .331
Diameter (in): .331 Produkt č.: 749002441
.246 NECK SIZING BUSHINGS from L.E. Wilson offer precise sizing with hardened stainless steel, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .246
Diameter (in): .246 Produkt č.: 749002476
Hardened stainless steel neck bushings in .001" increments for precise sizing, ensuring optimal neck tension and compatibility with L.E. Wilson dies.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .285
Diameter (in): .285 Produkt č.: 749002397
L.E. Wilson's hardened stainless steel neck bushings offer precise sizing in .001" increments, ensuring optimal neck tension and compatibility with Redding dies.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .292
Diameter (in): .292 Produkt č.: 749002403
Hardened stainless steel neck bushing from L.E. Wilson allows precise sizing in .001" increments, ensuring optimal neck tension and accuracy for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .243
Diameter (in): .243 Produkt č.: 749002463
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and compatibility with Redding dies.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .251
Diameter (in): .251 Produkt č.: 749002393
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing with .001" increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .242
Diameter (in): .242 Produkt č.: 749002462
Hardened stainless steel neck bushings from L.E. Wilson ensure precise sizing with .001" increments, ideal for fine-tuning neck tension and enhancing accuracy.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .249
Diameter (in): .249 Produkt č.: 749002446
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing with .001" increments, ideal for achieving optimal neck tension and bullet hold.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .334
Diameter (in): .334 Produkt č.: 749002466
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001” increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .244
Diameter (in): .244 Produkt č.: 749002474
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001” increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .258
Diameter (in): .258 Produkt č.: 749002483
Hardened stainless steel neck bushings from L.E. Wilson ensure precise sizing in .001" increments, allowing for optimal neck tension and fine-tuning capabilities.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .262
Diameter (in): .262 Produkt č.: 749002426
L.E. Wilson's hardened stainless steel neck bushings offer precise sizing in .001" increments, ensuring optimal neck tension and fine-tuning for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .250
Diameter (in): .250 Produkt č.: 749002423
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .310
Diameter (in): .310 Produkt č.: 749002404
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and reliable performance.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .286
Diameter (in): .286 Produkt č.: 749002398
Hardened stainless steel neck sizing bushing from L.E. Wilson offers precise sizing in .001" increments, ensuring optimal neck tension and reliability for your ammunition.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .269
Diameter (in): .269 Produkt č.: 749002451
L.E. Wilson's hardened stainless steel neck sizing bushings provide precise .001" increments for optimal neck tension and fine-tuning, ensuring reliable performance.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .289
Diameter (in): .289 Produkt č.: 749002401
Hardened stainless steel neck sizing bushings from L.E. Wilson offer precise .001" increments for optimal neck tension and fine-tuning, ensuring reliable performance.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .287
Diameter (in): .287 Produkt č.: 749002399
L.E. Wilson NECK SIZING BUSHINGS in .001" increments ensure precise neck tension, with options for fine-tuning and emergency sizing for hardened brass.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .257
Diameter (in): .257 Produkt č.: 749002464
Hardened stainless steel neck bushings from L.E. Wilson ensure precise sizing in .001" increments, allowing for optimal neck tension and fine-tuning for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .252
Diameter (in): .252 Produkt č.: 749002348
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and fine-tuning for your cartridges.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .312
Diameter (in): .312 Produkt č.: 749002406
Hardened stainless steel neck bushings from L.E. Wilson offer precise sizing in .001" increments, ensuring optimal neck tension and reliable bullet hold.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .307
Diameter (in): .307 Produkt č.: 749002369
Kovové neck sizing bushings L.E. Wilson v .001" krocích umožňují přesné tvarování nábojnic s možností jemného doladění pro optimální napětí.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .328
Diameter (in): .328 Produkt č.: 749002431
Hardened stainless steel neck bushings in .001" increments for precise sizing, ensuring optimal neck tension and compatibility with L.E. Wilson dies.
NECK SIZING BUSHINGS - STEEL NECK SIZER DIE BUSHING .305
Diameter (in): .305 Produkt č.: 749002367

Zákazníci také kupují

Věděli jste?

Informace o výrobci

Odpovědný hospodářský subjekt podle nařízení EU

Brownells Arms s.r.o.
Bílanská 1861/81
76701 Kroměříž
Česká republika
info@brownells.cz

Bezpečnostní pokyny

Jejda! Něco se pokazilo.

Narazili jsme na chybu při načítání obsahu. Obnovte stránku a zkuste to znovu. Pokud problém přetrvává, kontaktujte naši zákaznickou podporu.

Mapa stránky
Produktové Kategorie
Objednávaní
Zákaznícký servis

Připojení

Bezpečné platební metody

CZ-payment-methods2

Obchodní asociace

C.I.P.

Vítejte!

Vítejte v Brownells Česko, vašem cíli pro vše, co souvisí se zbraněmi. S našimi kořeny v opravdové vášni pro zbraně vám přinášíme nepřekonatelný výběr dílů na zbraně, příslušenství ke zbraním, nástroje pro zbrojíře, puškohledy a kolimátory a odborné znalosti.

Ať už chcete zbraň udržovat, opravovat nebo vylepšovat, máme to, co potřebujete!

Pro střelce, od střelců
Sdílíme vaše nadšení a víme přesně, co hledáte, protože jsme součástí komunity.

Obrovský výběr
Od základních věcí až po unikáty, najdete vše pod jednou střechou.

Náš mix tradice a inovace
Nakupujte s pohodlím moderní technologie, podpořené dědictvím zkušeností.

Procházejte naši kolekci a objevte proč jsme důvěryhodným jménem ve střeleckých sportech a lovu.

Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Brownells Österreich - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Brownells Switzerland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Brownells Deutschland - Einer der größten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schießsportzubehör Brownells France - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. Brownells Sverige - Världens största leverantör av Vapendelar, Vapensmide Verktyg & Skyttetillbehör Brownells Suomi Brownells Italia - Il negozio del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Brownells Polska - Największy na świecie dostawca części broni, narzędzi rusznikarskich & akcesoriów strzeleckich
*
Ceny včetně DPH 
Klasické zobrazeníKlasické zobrazení Mobilní zobrazeníMobilní zobrazení
Zákonná Záruka Zákonná Záruka

 

 

Tato stránka je provozována společností Brownells Arms s.r.o.


Brownells je registrovaná ochranná známka společnosti Brownells Incorporated a je používána na základě licence společností Brownells Arms s.r.o. a nezávislým distributorem v Česko od Brownells Incorporated.

 

 

 

Zpět na začátek