Atributy
- Náboje:
218 Bee
,25-20 Winchester
,32-20 Winchester
- Style:
Press Type
- Dodací hmotnost: 0,159kg
- Výška přepravy: 1mm
- Šířka přepravy: 102mm
- Délka přepravy: 127mm
- UPC: 734307905231
Produkt č.: 100010066
Výrob. č.: 90523
734307905231 Univerzální držák nábojnic používaný ve většině značek lisů na přebíjení. Nebude fungovat s Lee Auto Prime. Zobrazit tabulku držáků nábojnic LeeDodací lhůta je přibližně 14-21 dní.
Držák nábojnic LEE Universal Shellholder, č. 6, je ideální volbou pro většinu značek přebíjecích lisů. Je navržen tak, aby poskytoval spolehlivou funkčnost a kompatibilitu s širokým spektrem nábojnic.
Pro více informací o kompatibilitě a výběru správného držáku, prosím, navštivte Lee Shellholder Chart.
218 Bee,
25-20 Winchester,
32-20 Winchester
Press Type
Modified for Sinclair priming tool 13.12.2017
The Sinclair priming tool is in my opinion the best for accurately and consistently seating primers. However, for .338 LM (based on .416 Rigby) there are not a lot of options. The proper Sinclair holder is backordered from Brownell.
However the Sinclair tool accepts Lee hand priming tool shell holders and the #8 Lee shell holder fits and can be installed into the Sinclair tool by facing off the lug that holds the shell holder into a press thus converting it to a Lee priming-type shell holder, in other words just make this holder flat across the bottom as are the Lee priming shell holders. I did this easily in the lathe, a 5 minute job.
You may also need to modify the primer cup in the Sinclair tool to allow a case to fit smoothly. I took .025 off the lip of the cup to match the shell holder floor. The Sinclair plunger is adjustable (see their directions) and it sets primers just below flush when is set to .010 above the lip of the primer cup.
Narazili jsme na chybu při načítání obsahu. Obnovte stránku a zkuste to znovu. Pokud problém přetrvává, kontaktujte naši zákaznickou podporu.