Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika
611760420009 749012736
The SAECO Lead Hardness Tester lets you positively identify the hardness of your cast lead bullets, verifying they’re safe to shoot and won’t damage your valuable firearm. You can cast bullets from scrap lead and check their hardness so you can shoot them with complete confidence. Or check the hardness of your black powder cast bullets to ensure proper seating in the rifling and consistent accuracy for BPCR competition. Just insert the bullet into the aluminum housing, turn the hardened steel indenter until it stops, then read the depth of penetration off the vernier scale to determine the hardness. The tester is calibrated from 0 to 10 using the SAECO scale. A hardness of at least 6 is required for medium velocities in handguns, while a reading of over 8 works best for magnum handgun bullets or gas-checked rifle bullets. (For reference, wheel weights usually test between 7 and 9, and linotype normally reads a 10.) An indispensable tool for anybody serious about bullet casting.
8099 8099 1 CZK
Produkt č.: 749012736
REDDING SAECO LEAD HARDNESS TESTER
Číslo výrobce: 42000 611760420009 Tester tvrdosti olova SAECO vám umožní přesně určit tvrdost vašich odlitých olověných střel a ověřit, že jsou bezpečné k použití a nezpůsobí poškození vaší cenné zbraně. Můžete odlévat střely ze šrotu olova a kontrolovat jejich tvrdost, abyste měli jistotu, že s nimi můžete střílet bez obav. Nebo zkontrolujte tvrdost vašich odlitků pro černý prach, aby bylo zajištěno správné usazení v drážkách a konzistentní přesnost pro soutěže BPCR. Stačí vložit střelu do hliníkového pouzdra, otočit kaleným ocelovým indentorem až do zarážky a poté odečíst hloubku proniknutí na vernierové stupnici, abyste určili tvrdost. Tester je kalibrován od 0 do 10 podle SAECO stupnice. Pro střední rychlosti v krátkých zbraních je vyžadována tvrdost alespoň 6, zatímco hodnota nad 8 je nejlepší pro střely z magnumových krátkých zbraní nebo plynově uzavřené střely z pušek. (Pro srovnání, závaží kol obvykle testuje mezi 7 a 9 a linotyp běžně dosahuje hodnoty 10.) Nepostradatelný nástroj pro každého, kdo se vážně zajímá o odlévání střel.
8099 CZK 6 8 099,00 Kč *
Dodací lhůta je přibližně 14-21 dní.
6 Počet ks. skladem USA

Atributy

Dodací hmotnost: 0,204kg Výška přepravy: 33mm Šířka přepravy: 38mm Délka přepravy: 160mm

Detail produktů

Made in USA



The SAECO Lead Hardness Tester lets you positively identify the hardness of your cast lead bullets, verifying they’re safe to shoot and won’t damage your valuable firearm. You can cast bullets from scrap lead and check their hardness so you can shoot them with complete confidence. Or check the hardness of your black powder cast bullets to ensure proper seating in the rifling and consistent accuracy for BPCR competition. Just insert the bullet into the aluminum housing, turn the hardened steel indenter until it stops, then read the depth of penetration off the vernier scale to determine the hardness. The tester is calibrated from 0 to 10 using the SAECO scale. A hardness of at least 6 is required for medium velocities in handguns, while a reading of over 8 works best for magnum handgun bullets or gas-checked rifle bullets. (For reference, wheel weights usually test between 7 and 9, and linotype normally reads a 10.) An indispensable tool for anybody serious about bullet casting.
Novinky