Přes 300 000 zákazníků - děkujeme vám!

40 000+ produktů pro lov a střelbu

Objevte PRIMER POCKET SWAGER COMBO-2 od RCBS! ✨ Vylepšený design pro větší odolnost a široké použití na nábojnice. Ideální pro vaše projekty!

RCBS PRIMER POCKET SWAGER COMBO-2

076683094810 749015590

Atributy

  • Dodací hmotnost: 0,376kg
  • Výška přepravy: 51mm
  • Šířka přepravy: 127mm
  • Délka přepravy: 152mm
  • UPC: 076683094810

Detail produktů

Made in USA
1699 1699 1 CZK
1699 CZK 1 699,00 Kč

Ceny včetně DPH 

Produkt č.: 749015590

Výrob. č.: 9481

076683094810 Swager pro úpravu zápalek byl přepracován tak, aby vyhovoval širší skupině nábojnic. Swager tyče jsou vyrobeny z pevnější oceli s vysokou pevností, což více než zdvojnásobuje sílu původního designu. Není určeno pro použití na progresivních lisech.
Předbjednávka
1
2
3
4
5
6
7
8
9
10+

Popis:

Zobrazit originál (anglicky)
Swager pro úpravu zápalek byl přepracován tak, aby vyhovoval širší skupině nábojnic. Swager tyče jsou vyrobeny z pevnější oceli s vysokou pevností, což více než zdvojnásobuje sílu původního designu. Není určeno pro použití na progresivních lisech.

Atributy

  • Dodací hmotnost: 0,376kg
  • Výška přepravy: 51mm
  • Šířka přepravy: 127mm
  • Délka přepravy: 152mm
  • UPC: 076683094810

Detail produktů

Made in USA

Recenze zákazníků

Hodnocení zákazníků (2)

4 / 5
Doporučuji s výhradami

Brownells USA Measure before purchasing 17.4.2018

The RCBS swage die is an affordable solution to swaging the primer pocket of crimped brass using your existing single stage press. The metal finish on this tool by RCBS seems low quality but the parts feel solid and are functional in their purpose. In order for the complete tool to work as designed, your press must have a ram smaller than 1" in diameter within 0.75" of the top of a shellholder. There is an upside down cup for case removal which is made to fit between the swager and case. If your ram is larger, you will have to use a screwdriver to remove the case from the swager which slows down the process.

Rozhodně doporučuji

Brownells USA Works great 4.3.2016

This thing is a life saver. When you get those pesky military brass pieces that have the crimped primers and you don't want to ream them out by hand, this comes in handy like there is no tomorrow. It takes the standard die threads, and mounts on to the press. You need to adjust the stem to adjust the pressure according to the brass. You will need to do this for each headstamp because each company has different thickness. Run them through and you have to slam it down on the downstroke, but that kicks the shell off and you mount the next one. The one complaint is that this is not made for presses other than RCBS that I can tell. I don't have an RCBS press (Lyman and Lee) and this does work, but it's a little off for the Lyman, and the Lee (breechlock) needed modification for it to work. The reason for the modification is because the sleeve that slides over the ram (ejects the shell on the downstroke) has to have a flat surface to be on to work properly. My Lyman has a small hump (casting seam?) and it throws it a bit off balance. It still works, but can be a pain sometimes. However, the concept is excellent and works great.

Věděli jste?

Informace o výrobci

Odpovědný hospodářský subjekt podle nařízení EU

Brownells Arms s.r.o.
Bílanská 1861/81
76701 Kroměříž
Česká republika
info@brownells.cz

Jejda! Něco se pokazilo.

Narazili jsme na chybu při načítání obsahu. Obnovte stránku a zkuste to znovu. Pokud problém přetrvává, kontaktujte naši zákaznickou podporu.

Zpět na začátek