The Patent Pending Arisaka Offset Optic Mount is a modular mounting solution that allows the user to select a 35 or 45 degree offset position for a red dot sight without requiring additional components. The 35 degree position brings the red dot sight up closer to slimmer, smaller scopes, while the 45 degree position provides additional clearance around wider turrets or larger, higher magnification scopes. The Arisaka Offset Optic Mount is designed to be attached to the top Picatinny rail of an AR15 rifle. When the rifle is canted to make use of the offset red dot sight, the optic remains centered over the bore and maintains a lower 1/3 co-witness height. The base and optic plates can be reversed, allowing for use on the left or right side. The base and plates can each be purchased separately or as a combination, providing an upgrade path in the future as users acquire new red dot sights. Weight: 1.9 oz without optic. Length: 1.0" for the base, which occupies three Picatinny slots (twin recoil lugs and clamping screw). Height: The base sits 0.180" above the surface of the Picatinny rail. The mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized. IP20 and IP27 Torx Plus bit drivers are included with each base. Standard height (for 1.5" to 1.8" scope mounts): Plate 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice Plate 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 6: Aimpoint Acro Tall height (1.9" to 2.2" scope mounts): Plate 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III Plate 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T Plate 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero Plate 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530 Plate 12: Aimpoint Acro
Objevte revoluční montáž pro optiku Arisaka!
Patentovaná montáž pro optiku Arisaka Offset Optic Mount představuje modulární řešení montáže, které uživateli umožňuje vybrat si mezi 35 nebo 45 stupňovým offset pozicí pro red dot sight, aniž by bylo potřeba dalších komponentů.
Klíčové vlastnosti:
- 35 stupňová pozice: Přibližuje red dot sight k užším a menším optikám.
- 45 stupňová pozice: Poskytuje dodatečný prostor kolem širších turretů nebo větších optik s vyšším zvětšením.
- Kompatibilita: Navrženo pro připojení na horní Picatinny lištu pušky AR15.
- Stabilní pozice: Při naklonění pušky pro použití offset red dot sight zůstává optika vycentrována nad vývrtem a udržuje nižší výšku 1/3 co-witness.
- Reverzibilní design: Základna a optické desky mohou být otočeny pro použití na levé nebo pravé straně.
- Možnost budoucího upgradu: Základna a desky lze zakoupit samostatně nebo jako kombinaci.
Hmotnost: 1.9 oz bez optiky.
Délka: 1.0" pro základnu, která zabírá tři Picatinny sloty (dvojité zpětné zuby a šroub pro upevnění).
Výška: Základna se nachází 0.180" nad povrchem Picatinny lišty. Montáž je CNC obráběná z hliníku 6061-T6 a je ošetřena anodizací MIL-A-8625 Type III. S každou základnou jsou dodávány Torx Plus bit ovladače IP20 a IP27.
Standardní výška (pro montáže optiky 1.5" až 1.8"):
- Deska 1: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
- Deska 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T, Swampfox Kingslayer, Liberty, Justice
- Deska 4: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero
- Deska 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (ne 5X), Holosun HS403 (ne A), HS503, HS515, HS530
- Deska 6: Aimpoint Acro
Vysoká výška (pro montáže optiky 1.9" až 2.2"):
- Deska 7: Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
- Deska 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T
- Deska 10: Leupold Delta Point Pro, JPoint, Shield RMS, RMSc, Swampfox Sentinel, SIG Romeo Zero
- Deska 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (ne 5X), Holosun HS403 (ne A), HS503, HS515, HS530
- Deska 12: Aimpoint Acro