Gain increased sighting options for your Marlin centerfire lever rifle by installing this lightweight, aluminum scope rail. Accepts Picatinny or Weaver-style rings, plus is specially milled on back end to accept the XS Sight Systems Lever Rail Ghost Ring Sight for Marlin 1894, 1895 and Marlin 336/308MX (found elsewhere in catalog). Extra-long rail gives plenty of versatility in mounting scope directly over the receiver or forward over the barrel for intermediate eye relief optics or red dot sights. Requires removal of factory rear sight. Gunsmith installation recommended.
Hodnocení zákazníků pro položku XS Sight Systems MARLIN 1895 LEVER RAIL
Počet hodnocení: 4
Od brownells.com: 4
Průměrné hodnocení: 4
Great addition (26.12.2014)
First of all, the product came well packed and arrived very fast.
I install this on a 1894 in 44 mag, 20" micro groove. I did have to modify the front hole(with a round file), small (1/3-1/2 mm) for everything to fit just right. I got it very tight. After getting the hole move forward to fit on pillar, I trimmed the ring nut and also the recess just enough for ring nut to fit(with a Dremmel and stones). I took a black marker to all parts modified. I also used instructions on line @ SX.
I already had ghost rings, but the screw to install this is not included. I contacted SX, and they sent one out for free. Ordered it on the 22nd and got it today, The 26th.
This looks great. I will be able to use all sorts of optics on this, like a reflex, red dot, or various scopes.
My first mount will be a Leupold 1.5x5x20. I have ordered some Warne med rings(QD). I have estimated just under a 1/2" rise needed to keep ghost ring sight.
If you are going to use just one type of optic, Warne offers mounting plates for there rings, But this rail is very cool looking.
.
Easy to install(23.10.2009)
Rail mounted and aligned well. All required parts were included. (plastic drift punch, thread compound, allen wrench, screws, etc) Just needed a hammer and the proper fitting screwdriver. Written instructions were a little vague; but, understandable.
Flexible mount system, well made(27.10.2009)
Nice system. Gives more ring locations to accommodate different length scope tubes and ring types, plus accomdates back up metallic sights. Installation was easy, a drop on.
XS Sight Systems Service(5.8.2015)
Talked with the service technician about my two issues with the rail. She was very knowledgeable and professional. She recommended remedial actions and sent a replacement part. It was nice to talk to someone that really knew their job and product.
Produkt č.: 006000151 XS Sight Systems MARLIN 1895 LEVER RAIL Číslo výrobce: ML6003RN647533035842 Získejte možnosti zvýšeného pozorování pro pušku páky centerfire Marlin instalací této lehké, hliníkové rozsah železniční. Přijímá Picatinny nebo Weaver styl kroužky, a navíc je speciálně frézované na back-end přijmout XS Sight systémy páky železniční duch prsten pohled pro Marlin 1894, 1895 a Marlin 336/308MX (jinde v katalogu). Extra dlouhá železniční dává spoustu všestrannost v montáži oboru přímo nad přijímač nebo vpřed za barel pro střední oko úlevu optika nebo red dot památky. Vyžaduje odstranění tovární hledí. Puškař instalace doporučena.
2349CZK02 349,00 Kč
*
Přeobjednáno, dodací lhůta cca 4-12 týdnů ze skladu v USA.
Vlastnosti:Barevný: Matte BlackMake: MarlinMaterial: AluminumModel: 1895Number of Bases: 1-PieceStyle: Weaver
Color:
Matte Black
Material:
Aluminum
Model:
1895
Number of Bases:
1-Piece
Style:
Weaver
Udělat:
Marlin
Dodací hmotnost: 0,068kgVýška: 36mmŠířka: 36mmDélka: 307mm
Detail produktů
Made in USA
Produkt č.: 006000165 XS Sight Systems MARLIN 336/308X LEVER RAIL Číslo výrobce: ML6004RN647533036023 Získejte možnosti zvýšeného pozorování pro pušku páky centerfire Marlin instalací této lehké, hliníkové rozsah železniční. Přijímá Picatinny nebo Weaver styl kroužky, a navíc je speciálně frézované na back-end přijmout XS Sight systémy páky železniční duch prsten pohled pro Marlin 1894, 1895 a Marlin 336/308MX (jinde v katalogu). Extra dlouhá železniční dává spoustu všestrannost v montáži oboru přímo nad přijímač nebo vpřed za barel pro střední oko úlevu optika nebo red dot památky. Vyžaduje odstranění tovární hledí. Puškař instalace doporučena.
2349CZK12 349,00 Kč
*
Doba dodání přibližně 14-21 dní. 1 Počet ks. skladem USA
Produkt č.: 006000170 XS Sight Systems MARLIN 1894 LEVER RAIL Číslo výrobce: ML6005RN647533038416 Získejte možnosti zvýšeného pozorování pro pušku páky centerfire Marlin instalací této lehké, hliníkové rozsah železniční. Přijímá Picatinny nebo Weaver styl kroužky, a navíc je speciálně frézované na back-end přijmout XS Sight systémy páky železniční duch prsten pohled pro Marlin 1894, 1895 a Marlin 336/308MX (jinde v katalogu). Extra dlouhá železniční dává spoustu všestrannost v montáži oboru přímo nad přijímač nebo vpřed za barel pro střední oko úlevu optika nebo red dot památky. Vyžaduje odstranění tovární hledí. Puškař instalace doporučena.
2349CZK02 349,00 Kč
*
Přeobjednáno, dodací lhůta cca 4-12 týdnů ze skladu v USA.
Gain increased sighting options for your Marlin centerfire lever rifle by installing this lightweight, aluminum scope rail. Accepts Picatinny or Weaver-style rings, plus is specially milled on back end to accept the XS Sight Systems Lever Rail Ghost Ring Sight for Marlin 1894, 1895 and Marlin 336/308MX (found elsewhere in catalog). Extra-long rail gives plenty of versatility in mounting scope directly over the receiver or forward over the barrel for intermediate eye relief optics or red dot sights. Requires removal of factory rear sight. Gunsmith installation recommended.
Hodnocení zákazníků pro položku XS Sight Systems MARLIN 1895 LEVER RAIL
Počet hodnocení: 4
Od brownells.com: 4
Průměrné hodnocení: 4
Great addition (26.12.2014)
First of all, the product came well packed and arrived very fast.
I install this on a 1894 in 44 mag, 20" micro groove. I did have to modify the front hole(with a round file), small (1/3-1/2 mm) for everything to fit just right. I got it very tight. After getting the hole move forward to fit on pillar, I trimmed the ring nut and also the recess just enough for ring nut to fit(with a Dremmel and stones). I took a black marker to all parts modified. I also used instructions on line @ SX.
I already had ghost rings, but the screw to install this is not included. I contacted SX, and they sent one out for free. Ordered it on the 22nd and got it today, The 26th.
This looks great. I will be able to use all sorts of optics on this, like a reflex, red dot, or various scopes.
My first mount will be a Leupold 1.5x5x20. I have ordered some Warne med rings(QD). I have estimated just under a 1/2" rise needed to keep ghost ring sight.
If you are going to use just one type of optic, Warne offers mounting plates for there rings, But this rail is very cool looking.
.
Easy to install(23.10.2009)
Rail mounted and aligned well. All required parts were included. (plastic drift punch, thread compound, allen wrench, screws, etc) Just needed a hammer and the proper fitting screwdriver. Written instructions were a little vague; but, understandable.
Flexible mount system, well made(27.10.2009)
Nice system. Gives more ring locations to accommodate different length scope tubes and ring types, plus accomdates back up metallic sights. Installation was easy, a drop on.
XS Sight Systems Service(5.8.2015)
Talked with the service technician about my two issues with the rail. She was very knowledgeable and professional. She recommended remedial actions and sent a replacement part. It was nice to talk to someone that really knew their job and product.