Košík je prázdný.

Košík

+420 601 153 799

Novinky

PEARCE GRIP GRIP FRAME INSERT FOR GLOCK®

Glock 42/43 Frame Insert

Produkt č.: 092000030 605849500089 092000030

Popis
Hodnocení (19)

Fills The Opening In Glock Frame For Smoother Reloading

Plastic plug installs in the bottom rear cavity of the frame to fill the opening found in Glock® pistols. Front “lip” forms a tight, flush bond with the mag well to help make sure the mag goes where it should, smoothly. Keeps dirt and debris from finding its way inside the pistol and gives a clean, smooth look. Uses the lanyard hole for retention to snap firmly into place. Glock® Plus Zero fits Models 17 through 25, 31, 32, 34, 35, 37, and 38. Gen 4 Grip Frame Inserts allow for use of the factory interchangeable backstraps. Gen 4 Full & Mid model fits Generation 4 Glock® models 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact model fits Generation 4 Glock® models 26/27/33/39. Other inserts fit the Glock® models indicated in the price lines below. Does not add extra rounds.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

SPECS: Impact-resistant plastic, black. One per pack.

Další...

Hodnocení zákazníků pro položku Glock 42/43 Frame Insert

Počet hodnocení: 19
Od brownells.com: 19
Průměrné hodnocení: 4,1

Perfect (28.10.2015)

Fits perfectly, tight, flush, nice color match. Gives a nice clean finished look..

Perfect fit in the 43. (15.4.2016)

Perfect fit in my 43. Brownells' needs to update indicating this is made to fit the 42 and 43.

Quality product (24.3.2012)

Perfect fit in my Gen 4 G34. Very impressed, matches the stock dimensions VERY well.

Perfect! (29.5.2012)

Perfect fit on my G17 Gen 4 and able to use the back straps. Glad I went with this and not the others I was looking at.

Made to fit (2.11.2013)

It fits so well you can't find the seam with your fingernail. Smooth mag well fit. Best four bucks you can spend on a Glock.

A Good Purchase (8.4.2015)

Given its low price, I'd recommend this insert to anyone who wants to plug that cavity (which likely is more of an aesthetic decision than a practical or tactical one) and still be able to employ the back straps. I use the large back strap along with this Pearce insert in my 17, and I'm very pleased with the overall results.

Best Grip Plug for you Gen 4 Glock (19.12.2016)

I have looked at different plugs for my Gen 4 Glock. This one is all in one. Meaning you can use different size grips. Most of the grips I have looked at you need to decide, small, medium or large. The Pearce Grip Plug is easy to install, looks good, one piece, and you can use it for all of the grips. Best plug for your buck.

Idiot proof (6.8.2010)

Slips in easy yet firm. Completes the look of the frame. No idea why Glock didnt do this in the first place!

Save your money (18.7.2013)

The only way to secure it in the grip of my 20sf would be super glue or a screw. There is no nub on the plug to click into the grip hole...so non secured it will just fall out. Poor product design.

G21SF plug falls out (12.9.2015)

The idea is good but . . .

This looked good and tight when installed but fell out on the third shot fired. reinserting it lasted only one more shot making this useless. The ones I've installed in my 19 and 26 work as advertised. However, without gluing as stated in the other review, it will not stay in the gun. That is just not acceptable.

Works great! (4.5.2016)

Not sure why some people are having issues with fitment or why this has a bad review rating. I have a Gen 3 Glock 21 SF and this insert fits nice and snug.

Great Piece Great Price (23.1.2010)

It does exactly what it says it will do. I cannot ask for much more.

Simple but effective (18.5.2011)

EASY to install and works as advertised, keeping dust, lint and debris out. Only down side would be that it prevents use of the lanyard hole, if you happen to need that...

Different from Picture (30.6.2011)

This specific one that's made for subcompact glock is friction fit, which means there's no tab to hold it in place like the one shown in the picture. (since there's no lanyard hole to begin with on this model of glock.) Further more, since it's friction fit, after a few shoots fired, it begins to slip out of it's socket. It's a unnecessary distraction especially in self defense situation. Product not recommended.

Insert for G-26 does not stay put. (29.12.2015)

I agree with the other 1 star comment that this insert does not stay in place for the subcompacts. I've lost a couple at the range and the last one bought only took five shots to come lose and drop off. I've reinstalled it with a few dabs of medium strength locktite and, maybe this will help keep it in place and still be removable when needed. We'll see.

Why not? (16.12.2009)

It's cheap, and is a good cosmetic enhancement, but not much else.

Works Awesome (13.6.2011)

Works as advertised.

Works Great (21.3.2015)

It snapped right into my Glock 22. Fills in that ugly hole in the frame. Keeps the dust out.

Will buy another for my Glock 20.

Pearce Grip Frame Insert (5.1.2016)

I always wondered why Glocks have that hole in the grip. This item filled the ugly hole in the grip and will help keep dust, dirt, and debris from getting into the gun.

Přečtete si další hodnocení na webu brownells.com

126 126 9 CZK

Sale

092000030
Glock 42/43 Frame Insert
Číslo výrobce: PGFI42 605849500089 Plastová zátka nainstaluje v zadní dutině dolním rámu k vyplnění otvoru v Glock® pistole. Přední "lip" formy těsný, splachovací pouto s mag dobře pomoci, ujistěte se, že mag jde, kde by měla plynule. Udržuje nečistoty a usazeniny z najít svou cestu uvnitř pistole a čistý a hladký vzhled. Pomocí šňůrka díra pro uchování pevně zacvakněte. Glock® Plus nula hodí modely 17 až 25, 31, 32, 34, 35, 37 a 38. Gen 4 Grip rám vloží umožňují použití zaměnitelné backstraps továrny. Gen 4 plné & střední model hodí Generation 4 Glock® modely 17/18/19/22/23/24/25/31/32/34/35/37/38. Gen 4 Subcompact model hodí Generation 4 Glock® modely 26/27/33/39. Ostatní vložky nasaďte Glock® modely uvedené v řádcích cenu. Nepřidá extra kol.

118 CZK 2 118,00 Kč * 126,00 Kč

Skladem v USA 2 ks
Doba dodání 7 - 21 dní

Vlastnosti: Make: Glock Model: 42, 43

PEARCE GRIP GRIP FRAME INSERT FOR GLOCK®

Glock 42/43 Frame Insert

Hodnocení zákazníků pro položku Glock 42/43 Frame Insert

Atributy

Detail produktů

Hodnocení zákazníků pro položku Glock 42/43 Frame Insert