Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika
757253991165 319000106
The Accu-Ring is a sizing/seater die lock-ring which provides reference marks in increments of thousandths of an inch (0.001”). Sizing die (primary use) – Designed mainly for sizing dies, the Accu-Ring helps you zero in on what you want the headspace length of your cases to be. Seater die (secondary use) – The Accu-Ring also allows you to make fine adjustments to bullet seating depths. Notice: The distance of 0.001” is the distance between a long and short reference mark as shown in Figure 1. This distance indicates the up or down adjustment of the die in the Co-Ax® Reloading Press. Actual up or down movement of the die is 0.000998” per reference mark, which, for all intents and purposes, is one thousandth of an inch (0.001”).  
549 549 1 CZK
New
Produkt č.: 319000106
FORSTER PRODUCTS, INC. ACCU-RING DIE LOCK RING
Číslo výrobce: DIE-G-20 757253991165 Accu-Ring je uzamykací kroužek pro matrice velikosti/sezení, který poskytuje referenční značky s přesností na tisíciny palce (0,001”). Matrice velikosti (primární použití) – Hlavně určený pro matrice velikosti, Accu-Ring vám pomáhá přesně nastavit délku hlavy nábojnic, jakou potřebujete. Matrice sezení (sekundární použití) – Accu-Ring také umožňuje provádět jemné úpravy hloubky sezení střel. Upozornění: Vzdálenost 0,001” je rozestup mezi dlouhou a krátkou referenční značkou, jak je znázorněno na obrázku 1. Tato vzdálenost indikuje nastavení matrice nahoru nebo dolů v lisu Co-Ax® Reloading Press. Skutečný pohyb matrice nahoru nebo dolů je 0,000998” na referenční značku, což je pro všechny praktické účely tisícina palce (0,001”).
549 CZK 52 549,00 Kč *
Dodací lhůta je přibližně 14-21 dní.
Více než 10 ks. skladem USA

Atributy

Dodací hmotnost: 0,02kg Výška přepravy: 1mm Šířka přepravy: 102mm Délka přepravy: 70mm

Detail produktů

Made in USA



The Accu-Ring is a sizing/seater die lock-ring which provides reference marks in increments of thousandths of an inch (0.001”). Sizing die (primary use) – Designed mainly for sizing dies, the Accu-Ring helps you zero in on what you want the headspace length of your cases to be. Seater die (secondary use) – The Accu-Ring also allows you to make fine adjustments to bullet seating depths. Notice: The distance of 0.001” is the distance between a long and short reference mark as shown in Figure 1. This distance indicates the up or down adjustment of the die in the Co-Ax® Reloading Press. Actual up or down movement of the die is 0.000998” per reference mark, which, for all intents and purposes, is one thousandth of an inch (0.001”).  
Novinky