Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

BROWNELLS
CHECKERING CRADLE

050806104105 080026000
Locks All Stocks In Best Position For No Strain Layout & Checkering
A cradle makes checkering so much easier - and the results so much better - that we have never met a professional stockmaker who did not use a checkering cradle! Two of the most important advantages of a good checkering cradle are: 1) It allows you to work with both hands and rotate the stock as you checker across the pattern, keeping the work area at the most comfortable, controlled position. This eliminates the clumsy and difficult task of trying to work around a stationary stock - sometimes almost to the point of standing on your head - and following the pattern correctly from border to border. 2) Prevents the back and forth wobble that kills the cutting action of the checkering tools. If the stock is not securely held, it will move with the cutter. This movement lets the cutter grab the stock and makes it almost impossible to cut straight, even lines of uniform depth. Simple in design, low in cost, of rugged wood construction and highly practical. Adjustable to hold rifle stocks up to 33" long (which will include all stocks except Mannlicher-style) and all shotgun stocks and forends. Holds the stock rigidly, without marring finish, yet permits turning of the stock as the work progresses. Convenient also for stock inletting, sanding, staining and finishing. Bolt directly to the bench, or lock into a sturdy vise. Comes complete with all holders, bolts and instructions.
SPECS: 41½" (105cm) long, 8¼" (21cm) high, 1½" (3.8cm) wide.
4799 4799 1 CZK
Produkt č.: 080026000
BROWNELLS CHECKERING CRADLE
Číslo výrobce: 080026000 050806104105 Kolébka pro rytí dřeva (checkering) výrazně usnadňuje práci a zlepšuje výsledky, takže jsme se ještě nesetkali s profesionálním výrobcem pažeb, který by kolébku nepoužíval! Dvě z nejdůležitějších výhod dobré kolébky pro rytí jsou: 1) Umožňuje pracovat oběma rukama a otáčet pažbu, když ryjete přes vzor, čímž udržíte pracovní plochu v nejpohodlnější a nejkontrolovanější pozici. To eliminuje nešikovný a obtížný úkol snažit se pracovat kolem nepohyblivé pažby - někdy téměř do bodu, kdy stojíte na hlavě - a správně sledovat vzor od okraje k okraji. 2) Zabraňuje pohybu tam a zpět, který ničí řezací akci nástrojů na rytí. Pokud pažba není pevně držena, pohybuje se s řezačkou. Tento pohyb umožňuje řezačce chytit pažbu a téměř znemožňuje řezání rovných, rovnoměrných linií stejné hloubky. Jednoduchý design, nízká cena, robustní dřevěná konstrukce a vysoká praktičnost. Nastavitelný pro držení puškových pažeb až do délky 33" (což zahrnuje všechny pažby kromě stylu Mannlicher) a všechny brokovnicové pažby a předpažbí. Drží pažbu pevně, bez poškození povrchu, a přitom umožňuje otáčení pažby, jak práce postupuje. Vhodná také pro vydlabávání pažby, broušení, barvení a dokončovací práce. Připevněte přímo k pracovnímu stolu nebo zafixujte do pevného svěráku. Dodává se kompletně se všemi držáky, šrouby a návodem.
4799 CZK 0 4 799,00 Kč *
Předbjednávka, dodací lhůta je přibližně 4-12 týdnů ze skladu z USA.

Atributy

Dodací hmotnost: 2,722kg Výška přepravy: 81mm Šířka přepravy: 171mm Délka přepravy: 1 067mm

Detail produktů

Made in USA



Locks All Stocks In Best Position For No Strain Layout & Checkering
A cradle makes checkering so much easier - and the results so much better - that we have never met a professional stockmaker who did not use a checkering cradle! Two of the most important advantages of a good checkering cradle are: 1) It allows you to work with both hands and rotate the stock as you checker across the pattern, keeping the work area at the most comfortable, controlled position. This eliminates the clumsy and difficult task of trying to work around a stationary stock - sometimes almost to the point of standing on your head - and following the pattern correctly from border to border. 2) Prevents the back and forth wobble that kills the cutting action of the checkering tools. If the stock is not securely held, it will move with the cutter. This movement lets the cutter grab the stock and makes it almost impossible to cut straight, even lines of uniform depth. Simple in design, low in cost, of rugged wood construction and highly practical. Adjustable to hold rifle stocks up to 33" long (which will include all stocks except Mannlicher-style) and all shotgun stocks and forends. Holds the stock rigidly, without marring finish, yet permits turning of the stock as the work progresses. Convenient also for stock inletting, sanding, staining and finishing. Bolt directly to the bench, or lock into a sturdy vise. Comes complete with all holders, bolts and instructions.
SPECS: 41½" (105cm) long, 8¼" (21cm) high, 1½" (3.8cm) wide.
Novinky