Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

BROWNELLS
B&R RECOIL PAD FITTING JIG

050806110250 080000868
Lets You Do Fast, Professional, No-Mar Pad Installation
One of the most difficult aspects of fitting a recoil pad has always been the final fitting of pad to wood because it is so easy to hit the stock with the disc, sanding strip, or file - and ruin the finish. The B&R Recoil Pad Fitting Jig removes the risk of stock damage by letting you finish the pad completely off - and away from - the stock. The Jig is composed of two basic pieces: (1) an adjustable triangle on which the pad is mounted to be dressed to size, and (2) a universal support that attaches to the sanding disc table. Operation is simple. First, cut the stock to the length and pitch required to fit the customer. Attach the pad to the stock, and sharply scribe the outline of the stock on the pad. Then transfer the pad to the base plate of the Jig, set the angle of pitch, put the Jig on its support, and dress the pad to the point of just removing the scribed line (this is necessary as the line was drawn outside the stock). Finally, test fit the pad to the stock and do any final dressing by hand, if needed. The lines of the stock are carried correctly into the pad - and you have a perfect fit! The Jig eliminates all damage to the stock finish and reduces the entire pad mounting operation to a simple 15 minute exercise - making the job an easy and highly profitable one.

SPECS: Steel support is 20-1⁄4" (51.4cm) long. Steel triangle legs are approximately 11-1⁄4" (29.2cm) long. Aluminum base plate is 3-1⁄2" (9cm) long. Includes instructions.

3649 3649 1 CZK
Produkt č.: 080000868
BROWNELLS B&R RECOIL PAD FITTING JIG 050806110250 Jedním z nejtěžších aspektů přizpůsobení tlumiče zpětného rázu bylo vždy finální přizpůsobení podložky na dřevo, protože je velmi snadné poškodit pažbu kotoučem, brusným pásem nebo pilníkem - a zničit povrch. Pomůcka B&R RECOIL PAD FITTING JIG eliminuje riziko poškození pažby tím, že umožňuje dokončit práci s podložkou úplně mimo - a daleko od - pažby. Pomůcka se skládá ze dvou základních částí: (1) nastavitelný trojúhelník, na kterém je podložka upevněna pro úpravu na velikost, a (2) univerzální podpora, která se připevňuje k stolu s brusným kotoučem. Ovládání je jednoduché. Nejprve upravte pažbu na požadovanou délku a sklon, aby padla zákazníkovi. Připevněte podložku na pažbu a ostrým nástrojem vyznačte obrys pažby na podložce. Poté přeneste podložku na základní desku pomůcky, nastavte úhel sklonu, umístěte pomůcku na její podporu a upravte podložku tak, aby byla právě odstraněna vyznačená čára (to je nutné, protože čára byla nakreslena mimo pažbu). Nakonec zkuste podložku přizpůsobit na pažbu a případně proveďte finální úpravy ručně. Obrysy pažby jsou správně přeneseny do podložky - a máte perfektní padnutí! Pomůcka eliminuje veškeré poškození povrchu pažby a celou operaci montáže podložky redukuje na jednoduché 15minutové cvičení - čímž činí práci snadnou a vysoce ziskovou.
3649 CZK 0 3 649,00 Kč *
Předbjednávka, dodací lhůta je přibližně 4-12 týdnů ze skladu z USA.
Vlastnosti: Make: Universal Rifles, Universal Shotguns

Atributy

Udělat: Universal Rifles,Universal Shotguns Dodací hmotnost: 0,454kg Výška přepravy: 36mm Šířka přepravy: 102mm Délka přepravy: 533mm

Detail produktů

Made in USA



Lets You Do Fast, Professional, No-Mar Pad Installation
One of the most difficult aspects of fitting a recoil pad has always been the final fitting of pad to wood because it is so easy to hit the stock with the disc, sanding strip, or file - and ruin the finish. The B&R Recoil Pad Fitting Jig removes the risk of stock damage by letting you finish the pad completely off - and away from - the stock. The Jig is composed of two basic pieces: (1) an adjustable triangle on which the pad is mounted to be dressed to size, and (2) a universal support that attaches to the sanding disc table. Operation is simple. First, cut the stock to the length and pitch required to fit the customer. Attach the pad to the stock, and sharply scribe the outline of the stock on the pad. Then transfer the pad to the base plate of the Jig, set the angle of pitch, put the Jig on its support, and dress the pad to the point of just removing the scribed line (this is necessary as the line was drawn outside the stock). Finally, test fit the pad to the stock and do any final dressing by hand, if needed. The lines of the stock are carried correctly into the pad - and you have a perfect fit! The Jig eliminates all damage to the stock finish and reduces the entire pad mounting operation to a simple 15 minute exercise - making the job an easy and highly profitable one.

SPECS: Steel support is 20-1⁄4" (51.4cm) long. Steel triangle legs are approximately 11-1⁄4" (29.2cm) long. Aluminum base plate is 3-1⁄2" (9cm) long. Includes instructions.

Novinky