Košík je prázdný.

Košík

Novinky

BROWNELLS
AR-15 SIGHT WRENCH

078000009

Popis
Hodnocení (11)

Two Styles, For A1 & A2, Give Fast, Convenient Sight Adjustment

Precision machined from tough, stressproof steel with square-profile fingers that grip the sight notches firmly and won't "roll out"; provides easy, exact sight adjustment. Plus, they resist bending and breaking to give years of service. Deeply drilled body fits both issue and tall blade sights. An extra-nice touch are the hex-shaped bodies; they're easy to grasp, easy to turn and won't roll off your bench. Three tools: A1 five-prong and A2 four-prong fit front and rear sights. A1/A2 is double ended to fit both five-detent A1 and four-detent, square blade, A2 front sights only. A2 wrenches also fit FN SCAR.

SPECS: Stressproof steel, blue finish. A1: five-prong and A2: four-prong (adjusts front and rear). 1-3/8" (3.5cm) long x ¾" (19mm) dia. A1/A2: 2½" (6.4cm) long four-prong/five-prong front only wrench. A2 wrench is designed for the standard A-2 style front post

Další...

Hodnocení zákazníků pro položku BROWNELLS A2 AR-15 SIGHT WRENCH

Počet hodnocení: 11
Od brownells.com: 11
Průměrné hodnocení: 3

Flawless adjustment for 4 and 5 prong (16.12.2011)

I had never used an M16/AR15 front sight adjustment tool. I always had used the tip of a bullet. But when the detent holes were too small to fit the bullet tip on a particular rifle, I first tried the other sight adjustment tool (in the same listing as this tool), but that wouldn't fit because of diameter. This tool is flawless and allows adjusting front sights with either 4 or 5 detent holes.

Good dual purpose tool (5.5.2012)

It seems like you can't predict when the sight you need to adjust is a four or five prong-- this solves that dilemma.

Didn't fit any of my A1/A2 sights (30.12.2013)

This tool didn't fit the front sights on any of my A1/A2 rifles(7 of them). The inside diameter of the tool is to small. I had to carefully bend the teeth out and open up the I.D. with a round stone. I then had to file the corners of the teeth to allow me to turn the sight.

Absolutely useless piece of garbage (13.2.2014)

This unit DOES NOT fit a Yankee Hill folding front sight or a Rock River standard A2 - Brownells should list which sights it DOES fit, if any.Besides the fit issue, the basic quality of the "tool" is extremely poor and definately not worth $16.99 - should be more like $2.99. Save your money and look elsewhere - don't bother with this piece of junk!

Recommend It (16.6.2014)

The correct tool for my Colt 6940.

Great Idea, Bad Execution! (30.8.2009)

This tool has all the improvments to make it outstanding.
It is perfect for me because my AR-15s have A2 front sight posts and A1 rear adjustment wheels.

The problem is that the tines or teeth on both ends are not long enough to press down on the spring detents and allow you to turn the front or rear sights. You have to use this tool to turn the post or wheel while using something else to depress the spring detents.
The old tool didn't have the cool new look and the ability to put a wrench to it but at least it worked on its own.

A simple lengthening of the teeth/tines on this tool would make it an outstanding adition to any AR-15/M-16 shooters tool bag.

Worthless trash! Don't waste your money! (16.2.2011)

As the previous reviewer stated, this piece of garbage doesn't work. The prongs are not long enough. If you've got the right size file, you might be able to get it working, but if you pay [$]for a super simple tool, it ought to work...and if you don't do it just right, you'll simply ruin the tool.How does anyone adjust this sight? Seems like it ought to be easy...hardly. Still searching for a tool that will work without destroying my fifty-dollar tritium front sight.

Works when used on the right sight. (26.2.2011)

I gave a scathing review of this tool below, but have learned a little more about it since and would like to revise my statement. I can't edit that review, so I'm adding another one.

My front sight is a Samson and the fit of the post seems a bit tight. Moreover, I was adding a Trijicon tritium post and it's built a little differently than the standard one. The part of the post that this tool turns is taller on the Trijocon than the standard one and the prongs on the tool aren't long enough to depress the pin far enough to let the post turn, so this tool will not work on that sight.

It will probably work okay on a standard post, as long as it's not too tight.

The right tool for me (3.12.2011)

I've never used a front sight tool before. Normally I would just use the tip of a bullet. However, my Bushmaster front sight detents for the front sight were too small to fit the bullet tip. Nothing else worked - not even a small jeweler's screwdriver. I tried both Brownell's AR15 sight wrenches, and this was the right one for me. I'll probably buy a few more to have them on hand.

Dont buy (27.2.2012)

Bought this to use on the Tech Sights. This tool will not fit in the rear sight holes. The diameter of the pin pattern on the tools is too small. I compared it to another that I have which works on both the Tech Sight and A1s. I have not tried this on an A1 though as I dont own one so it might work on that. Very disappointed. Only reason I didnt send it back is because I need the 5 prong front sight tool.

Worked like a champ! (3.3.2015)

Perfect fit and easy adjustment on my old Colt SP1 pre-assist. Hex design made for a good grip.

Only used this one time so can't determine durability of tool. I will say that there is very little strain - should last hopefully. The pins were just long enough to engage but not make contact with carry handle.

Přečtete si další hodnocení na webu brownells.com

549 649 3 CZK

Produkt č.: 078000009
BROWNELLS A2 AR-15 SIGHT WRENCH A2 AR-15 pohled klíč

549 CZK 2 549,00 Kč *

Skladem v USA 2 ks
Doba dodání 7 - 21 dní

Vlastnosti: Make: AR-15

Vložit do nákupního seznamu

Zeptejte se

Vložit do nákupního seznamu

Zeptejte se

Atributy

Udělat: AR-15 Dodací hmotnost: 0,018kg Šířka: 83mm Délka: 146mm

Detail produktů

Made in USA

A2 AR-15 pohled klíč

Produkt č.: 078000008
BROWNELLS A1 AR-15 SIGHT WRENCH A1 AR-15 pohled klíč

549 CZK 8 549,00 Kč *

Skladem v USA 8 ks
Doba dodání 7 - 21 dní

Vlastnosti: Make: AR-15

Vložit do nákupního seznamu

Zeptejte se

Vložit do nákupního seznamu

Zeptejte se

Atributy

Udělat: AR-15 Dodací hmotnost: 0,005kg Šířka: 83mm Délka: 146mm

Detail produktů

Made in USA

A1 AR-15 pohled klíč

Produkt č.: 078000010
BROWNELLS A1/A2 AR-15 SIGHT WRENCH A1/A2 AR-15 pohled klíč

649 CZK 14 649,00 Kč *

Skladem v USA 14 ks
Doba dodání 7 - 21 dní

Vlastnosti: Make: AR-15

Vložit do nákupního seznamu

Zeptejte se

Vložit do nákupního seznamu

Zeptejte se

Atributy

Udělat: AR-15 Dodací hmotnost: 0,023kg Výška: 1mm Šířka: 83mm Délka: 146mm

Detail produktů

Made in USA

A1/A2 AR-15 pohled klíč

Popis
Hodnocení (11)

Two Styles, For A1 & A2, Give Fast, Convenient Sight Adjustment

Další...

Hodnocení zákazníků pro položku BROWNELLS A2 AR-15 SIGHT WRENCH

Počet hodnocení: 11
Od brownells.com: 11
Průměrné hodnocení: 3

Flawless adjustment for 4 and 5 prong (16.12.2011)

Good dual purpose tool (5.5.2012)

It seems like you can't predict when the sight you need to adjust is a four or five prong-- this solves that dilemma.

Didn't fit any of my A1/A2 sights (30.12.2013)

Absolutely useless piece of garbage (13.2.2014)

Recommend It (16.6.2014)

The correct tool for my Colt 6940.

Great Idea, Bad Execution! (30.8.2009)

Worthless trash! Don't waste your money! (16.2.2011)

Works when used on the right sight. (26.2.2011)

The right tool for me (3.12.2011)

Dont buy (27.2.2012)

Worked like a champ! (3.3.2015)

Přečtete si další hodnocení na webu brownells.com

Zákazníci také kupují
Alternativní produkty

BROWNELLS AR-15/M16 ACTION BLOCK & LOWER VISE BLOCK SET
AR-15/M16 LOWER RECEIVER VISE BLOCK

BROWNELLS

Skladem Skladem v USA 483 ks
Doba dodání 7 - 21 dní

1 649,00 Kč * 799,00 Kč - 1 649,00 Kč*

Bloky ponku a svěráku

3,6 (49)

IOSSO PRODUCTS IOSSO PISTOL BORE BRUSH .22 CAL
IOSSO NYFLEX PISTOL BORE BRUSHES

IOSSO PRODUCTS

Skladem v USA 25 ks
Doba dodání 7 - 21 dní Skladem v USA 25 ks
Doba dodání 7 - 21 dní

269,00 Kč *

Čistící kartáčky

3 (2)

GHOST ROCKET 3.5 TRIGGER CONNECTOR GEN 1-5
GHOST ROCKET 3.5 TRIGGER CONNECTOR

GHOST

Skladem v USA 64 ks
Doba dodání 7 - 21 dní Skladem v USA 64 ks
Doba dodání 7 - 21 dní

849,00 Kč *

Díly stojiny spouště

4,3 (28)

MAGPUL ASAP QD AMBIDEXTROUS SLING ATTACHMENT POINT
QUICK DETACH AMBIDEXTROUS RECEIVER END PLATE

MAGPUL

Skladem v USA 177 ks
Doba dodání 7 - 21 dní Skladem v USA 177 ks
Doba dodání 7 - 21 dní

999,00 Kč *

Montáže taktických popruhů

3,9 (7)

COLT AR15A4 COVER SPRING
AR15A4 COVER SPRING

COLT

Skladem v USA 3 ks
Doba dodání 7 - 21 dní Skladem v USA 3 ks
Doba dodání 7 - 21 dní

249,00 Kč *

Drobné díly krytu výhozného okénka

4 (1)

Přihlášení

Zapomněli jste heslo?
Zaregistrovat se

Sociální média

Facebook

Mapa stránky

Produktové Kategorie

Objednávaní

Zákaznícký servis

Společnost Brownells je předním světovým dodavatelem zbrojních nástrojů, dílů střelných zbraní a jejich příslušenství, která je na trhu již více než 75 let. S důvěrou se na nás obrací laická i odborná veřejnost.

Internetový obchod Vám nabízí více než 52 000 produktů, ze kterých si vybere i ten nejnáročnější uživatel.

Vaše spokojenost je pro nás velmi důležitá. Proto se snažíme neustále rozšiřovat portfolio produktů. Může se stát, že se zbožím nebudete spokojeni, můžete ho kdykoliv vrátit a dostanete od nás zpět plnou částku nebo nový produkt v uvedené hodnotě.

Chceme být zárukou Vaší spokojenosti!

cf-web-badges-e-ltgray