Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

EGW
1911 AUTO PLUNGER TUBE STAKING TOOL

841370108640 296000123
Protects The Tube & Frame From Damage; No Need To Remove Ejector
Two-piece staking tool protects the plunger tube and surrounding frame area with a block of machined Delrin® while you spread the pins with the steel staking bar. Eliminates metal-on-metal contact on exterior surfaces to prevent scratches that can mar the pistol’s finish. Saves you time, too, because the staking bar has a cutout to clear the ejector, so you can stake the tube without having to remove it. The staking point is a hardened steel screw that lets you adjust the staking depth. When the point wears out, simply install a new screw (spare included) to make the tool good as new. Delrin block has cutouts to support both rounded and square plunger tubes; cuts are positioned so the block always rests on a flat side to provide full support.

SPECS: Steel, black oxide finish, and machined Delrin.

1249 1249 1 CZK
Produkt č.: 296000123
EGW PLUNGER TUBE STAKING TOOL
Číslo výrobce: 70550 841370108640 Dvoudílný nástroj pro zatlačení chrání trubičku pístu a okolní oblast rámu blokem z obráběného Delrinu® zatímco rozšiřujete kolíky pomocí ocelového zatloukacího prutu. Eliminuje kontakt kov na kov na vnějších površích, aby se předešlo škrábancům, které by mohly poškodit povrch pistole. Ušetří vám to také čas, protože zatloukací prut má výřez pro vyhazovač, takže můžete trubičku zatlačit bez nutnosti ji odstranit. Bod zatlačení je z tvrzené oceli a umožňuje vám nastavit hloubku zatlačení. Když se bod opotřebí, jednoduše nainstalujte nový šroub (náhradní je součástí balení), aby byl nástroj opět jako nový. Blok Delrin má výřezy pro podporu jak zaoblených, tak čtverečných trubiček pístu; řezy jsou umístěny tak, aby blok vždy spočíval na ploché straně a poskytoval plnou podporu.
1249 CZK 0 1 249,00 Kč *
Předbjednávka, dodací lhůta je přibližně 4-12 týdnů ze skladu z USA.
Vlastnosti: Make: 1911

Atributy

Udělat: 1911 Dodací hmotnost: 0,113kg Výška přepravy: 10mm Šířka přepravy: 97mm Délka přepravy: 157mm

Detail produktů

Made in USA



Protects The Tube & Frame From Damage; No Need To Remove Ejector
Two-piece staking tool protects the plunger tube and surrounding frame area with a block of machined Delrin® while you spread the pins with the steel staking bar. Eliminates metal-on-metal contact on exterior surfaces to prevent scratches that can mar the pistol’s finish. Saves you time, too, because the staking bar has a cutout to clear the ejector, so you can stake the tube without having to remove it. The staking point is a hardened steel screw that lets you adjust the staking depth. When the point wears out, simply install a new screw (spare included) to make the tool good as new. Delrin block has cutouts to support both rounded and square plunger tubes; cuts are positioned so the block always rests on a flat side to provide full support.

SPECS: Steel, black oxide finish, and machined Delrin.

Novinky