Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the rods glow. 3-dot sight picture; front sight has green insert, rear has two orange inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable.
Další...
Tyto přímé náhrady továrních mířidel na populárních ručních zbraních sbírají okolní světlo pro vynikající viditelnost. Čím více světla, tím více tyčinky svítí. Trojbodový mířící obrazec; přední mířidlo má zelenou vložku, zadní dvě oranžové vložky. Fire Sights pro zbraně původně vybavené pevnými mířidly jsou také pevná. Pokud byla zbraň původně vybavena nastavitelným zadním mířidlem, bude Fire Sight nastavitelný.
Další...
Hodnocení zákazníků pro položku WILLIAMS GUN SIGHT S&W M&P BODYGUARD 380 FIRE SIGHT SET
Počet hodnocení: 5
Od brownells.com: 3
Průměrné hodnocení: 1,8
Cheap(4.8.2017)
I want to start off by saying I was using a sight pusher that is designed to install iron sights on M&P Shields when working with these sights. The front sight went on with ease. However, the rear sight was a complete 360 from from the front sight. It was going on with normal resistance (similar to the front sight). The normal resistance marred the rear sight (there was no marring to the front). Then I used a brass punch to punch it out, because sight pusher already damaged the rear. The brass punch damaged the other side of the sight. I believe they used some of the cheapest alluminum to make the rear sight (it shouldn't of marred that bad). I know this because I have worked with many sights before.
half n half(29.8.2013)
I really like these sights my complaints are the image shows red front green rear the sights I received were opposite red/orange rear green front is this a huge deal for me no but for some people it would be a huge issue as the warmer color is the one that will attract your eye for focal plane another complaint is the sides were impossible to drive in without damaging due to a angled downward toward pistol rear sight attempted using a dowel but sight split it due to sharp edge also sights are much more narrow if you center them no problem but if they need adjusted expecially away from ejection port they will uncover the striker blocker under sights do sights work yes are they easier to pick up over factory yes will I keep them on weapon yes for now just wish
Great Sights(20.7.2014)
I have these installed on my SD40VE & my M&P 9mm Pro Series, and I really like them.
I think these sights really catch the eye and are easier to line up shots with compared to other sights. I love that you can change out the fiber optic rods to different colors. If you're looking for a set of fixed sights I strongly recommend these. I would have given 5 stars, but I think all sights are over priced, so I only gave 4. These are cheaper than other similar sights though.
Hezké, ale nepoužitelné 2(14.9.2017)
V recenzi jsem omylem napsal "bronzovou tyčku" .... myslel jsem mosaznou.
Hezké, ale nepoužitelné.(14.9.2017)
Přes kamaráda objednaný set mířidel na SW Shield 9mm. Na první pohled vypadají skvěle, kvalita zpracování OK. Problémje použitý materiál. Bohužel nejsou ocelová, ale z dost měkého hliníku. Pokud budete při montáži používat kladívko a bronzovou tyčku, tak mířidla zdeformujete a silně poškodite. Jediné místo do kterého se dá klepnout je totiž trochu silnější alobal. Samotná část která zapadá do vybrusu pro hledí se ihned kousne a poškodí. Muška je na tom podobne. Nedává smysl instalovat mířidla, která například při pádu pistole na zem z největší pravděpodobností přestanou plnit svůj účel. Pro mně zjištění, za 1500 kč, že se mám držet osvedčených firem. Jediná možnost jak je instalovat je tak, že nejprve obrousíte mířidla tak, že půjdou nasadit bez použití nástrojů a fixovat je pouze šroubkem. Tento způsob je ale pro mně neakceptovatelný, protože pravděpodobnost svévolného uvolnění hraničí z jistotou.
Produkt č.: 962000108 WILLIAMS GUN SIGHT S&W M&P BODYGUARD 380 FIRE SIGHT SET Číslo výrobce: 70993053506709939 Tyto přímé náhrady továrních mířidel na populárních ručních zbraních sbírají okolní světlo pro vynikající viditelnost. Čím více světla, tím více tyčinky svítí. Trojbodový mířící obrazec; přední mířidlo má zelenou vložku, zadní dvě oranžové vložky. Fire Sights pro zbraně původně vybavené pevnými mířidly jsou také pevná. Pokud byla zbraň původně vybavena nastavitelným zadním mířidlem, bude Fire Sight nastavitelný.
1999CZK01 999,00 Kč
*
Předbjednávka, dodací lhůta je přibližně 4-12 týdnů ze skladu z USA.
Vlastnosti:Make: Smith & WessonModel: BodyguardSight Color: Green/OrangeStyle: Fiber Optic
Direct replacements for factory sights on popular handguns gather ambient light for superb visibility. The more light, the brighter the rods glow. 3-dot sight picture; front sight has green insert, rear has two orange inserts. The Fire Sights for guns originally equipped with fixed sights are also fixed. If the gun was originally equipped with an adjustable rear sight, the Fire Sight will be adjustable.
Další...
Tyto přímé náhrady továrních mířidel na populárních ručních zbraních sbírají okolní světlo pro vynikající viditelnost. Čím více světla, tím více tyčinky svítí. Trojbodový mířící obrazec; přední mířidlo má zelenou vložku, zadní dvě oranžové vložky. Fire Sights pro zbraně původně vybavené pevnými mířidly jsou také pevná. Pokud byla zbraň původně vybavena nastavitelným zadním mířidlem, bude Fire Sight nastavitelný.
Další...
Hodnocení zákazníků pro položku WILLIAMS GUN SIGHT S&W M&P BODYGUARD 380 FIRE SIGHT SET
Počet hodnocení: 5
Od brownells.com: 3
Průměrné hodnocení: 1,8
Cheap(4.8.2017)
I want to start off by saying I was using a sight pusher that is designed to install iron sights on M&P Shields when working with these sights. The front sight went on with ease. However, the rear sight was a complete 360 from from the front sight. It was going on with normal resistance (similar to the front sight). The normal resistance marred the rear sight (there was no marring to the front). Then I used a brass punch to punch it out, because sight pusher already damaged the rear. The brass punch damaged the other side of the sight. I believe they used some of the cheapest alluminum to make the rear sight (it shouldn't of marred that bad). I know this because I have worked with many sights before.
half n half(29.8.2013)
I really like these sights my complaints are the image shows red front green rear the sights I received were opposite red/orange rear green front is this a huge deal for me no but for some people it would be a huge issue as the warmer color is the one that will attract your eye for focal plane another complaint is the sides were impossible to drive in without damaging due to a angled downward toward pistol rear sight attempted using a dowel but sight split it due to sharp edge also sights are much more narrow if you center them no problem but if they need adjusted expecially away from ejection port they will uncover the striker blocker under sights do sights work yes are they easier to pick up over factory yes will I keep them on weapon yes for now just wish
Great Sights(20.7.2014)
I have these installed on my SD40VE & my M&P 9mm Pro Series, and I really like them.
I think these sights really catch the eye and are easier to line up shots with compared to other sights. I love that you can change out the fiber optic rods to different colors. If you're looking for a set of fixed sights I strongly recommend these. I would have given 5 stars, but I think all sights are over priced, so I only gave 4. These are cheaper than other similar sights though.
Hezké, ale nepoužitelné 2(14.9.2017)
V recenzi jsem omylem napsal "bronzovou tyčku" .... myslel jsem mosaznou.
Hezké, ale nepoužitelné.(14.9.2017)
Přes kamaráda objednaný set mířidel na SW Shield 9mm. Na první pohled vypadají skvěle, kvalita zpracování OK. Problémje použitý materiál. Bohužel nejsou ocelová, ale z dost měkého hliníku. Pokud budete při montáži používat kladívko a bronzovou tyčku, tak mířidla zdeformujete a silně poškodite. Jediné místo do kterého se dá klepnout je totiž trochu silnější alobal. Samotná část která zapadá do vybrusu pro hledí se ihned kousne a poškodí. Muška je na tom podobne. Nedává smysl instalovat mířidla, která například při pádu pistole na zem z největší pravděpodobností přestanou plnit svůj účel. Pro mně zjištění, za 1500 kč, že se mám držet osvedčených firem. Jediná možnost jak je instalovat je tak, že nejprve obrousíte mířidla tak, že půjdou nasadit bez použití nástrojů a fixovat je pouze šroubkem. Tento způsob je ale pro mně neakceptovatelný, protože pravděpodobnost svévolného uvolnění hraničí z jistotou.