Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

EGW
S&W ADJUSTABLE REAR SIGHT TRIJICON RMR SIGHT MOUNT

841370116881 296000594
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
1999 1999 1 CZK
New
Produkt č.: 296000594
EGW REAR ADJ SIGHT MOUNT FOR TRIJICON RMR FITS S&W 1911 BLACK
Číslo výrobce: 49535 841370116881 Materiál: Hliník 7075 Povrchová úprava: Matný černý Hardcoat Celková délka: 1.780" Celková šířka: 1.1" Montážní hardware: (2) ploché hlavy šrouby 6-32, (1) nastavitelný šroub 6-32 X 3/16 Vhodnost pro červený bod: Trijicon RMR, Holosun HS507C Tato montáž pasuje na: Baby Desert Eagle (po roce 2006) EAA Witness Elite Match Tato montáž neodpovídá: Rock Island 1911s Stačí odstranit zadní mířidlo vaší zbraně a nahradit ho naší montáží, aby bylo možné namontovat vaše mířidlo Trijicon RMR. Nejsou potřeba žádné úpravy. Naši montáž můžete kdykoliv sundat a znovu nasadit zadní mířidlo. Montážní hardware je součástí balení. Instrukce pro instalaci Odstraňte zadní mířidlo* Nainstalujte montáž EGW Sight Mount do drážky Utáhněte nastavitelný šroub (pokud je přiložen) Umístěte červený bod na montáž EGW Sight Mount (mezi červený bod a montáž můžete vložit malý kousek papíru pro snazší odstranění a ochranu před Loctite) Aplikujte modrý Loctite na přiložené montážní šrouby Utáhněte montážní šrouby s momentem 15in/lbs 2 šrouby s plochou hlavou - Přiloženy pro Trijicon RMR Pro instalaci šroubů, které jsou přiloženy k této montáži, je potřeba imbusový klíč velikosti 5/64".
1999 CZK 0 1 999,00 Kč *
Předbjednávka, dodací lhůta je přibližně 4-12 týdnů ze skladu z USA.
Vlastnosti: Barevný: Black Make: Smith & Wesson Material: Aluminum Model: 1911 Number of Bases: 1-Piece Style: Taktický

Atributy

Color: Black Material: Aluminum Model: 1911 Number of Bases: 1-Piece Style: Taktický Udělat: Smith & Wesson Dodací hmotnost: 0,036kg Výška přepravy: 25mm Šířka přepravy: 89mm Délka přepravy: 140mm

Detail produktů

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Novinky