Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

EGW
S&W 1911 ADJUSTABLE LEUPOLD DELTAPOINT PRO SIGHT MOUNT

296000544
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
1999 1999 1 CZK
New
Produkt č.: 296000544
EGW SIGHT MOUNT FOR LEUPOLD DELTAPOINT PRO FITS S&W 1911 BLACK
Číslo výrobce: 49395 Materiál: Hliník 7075 Povrchová úprava: Matný černý Hardcoat Celková délka: 1.811\" Celková šířka: .99\" Montážní hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Kompatibilita s červeným bodem: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter Montážní lišty EGW jsou určeny k instalaci zleva doprava (s hlavní směřující dopředu). Drážka má progresivní zkosení pro snadnější instalaci. Jednoduše odstraňte zadní mířidlo na vaší zbrani a nahraďte jej naší montážní lištou, abyste mohli namontovat svůj Vortex Viper/Venom, Burris FastFire nebo Docter červený bod. Nejsou vyžadovány žádné úpravy. Naši montáž můžete kdykoli sundat a znovu namontovat zadní mířidlo. Montážní hardware je součástí balení. Instrukce pro instalaci Odstraňte zadní mířidlo* Nainstalujte montážní lištu EGW do drážky Utáhněte zajišťovací šroub (pokud je aplikovatelný) Umístěte červený bod na montážní lištu EGW (umístění malého kusu papíru mezi červeným bodem a montážní lištou usnadní demontáž a zabrání kontaktu Loctite s červeným bodem.) Aplikujte modrý Loctite na přiložené montážní šrouby Moment utažení montážních šroubů na 15in/lbs 2 Button Head Cap Screws - Přiloženo pro zaměřovače Vortex Viper a Venom 2 Flat Head Cap Screws - Přiloženo pro zaměřovače Burris FastFire a Docter K šroubům, které jsou součástí tohoto montážního setu, je vyžadován imbusový klíč o velikosti 5/64\''.
1999 CZK 1 1 999,00 Kč *
Dodací lhůta je přibližně 14-21 dní.
1 Počet ks. skladem USA
Vlastnosti: Barevný: Black Make: Smith & Wesson Material: Aluminum Model: 1911 Number of Bases: 1-Piece Style: Taktický

Atributy

Color: Black Material: Aluminum Model: 1911 Number of Bases: 1-Piece Style: Taktický Udělat: Smith & Wesson Dodací hmotnost: 0,04kg Výška přepravy: 25mm Šířka přepravy: 76mm Délka přepravy: 203mm

Detail produktů

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Novinky