Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

EGW
RUGER PC CARBINE LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370116676 296000548
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
0 0 1 CZK
New
Produkt č.: 296000548
EGW RUGER PC CARBINE LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Číslo výrobce: 49399 841370116676 Materiál: Hliník 7075 Povrchová úprava: Matný černý tvrdý povlak Celková délka: 1.811\" Celková šířka: .99\" Montážní hardware: (2) 6-32 Button Head šrouby, (2) 6-32 Flat Head šrouby, (1) 6-32 Set šroub Kompatibilita s červenými bodovými zaměřovači: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter Montážní lišty EGW jsou určeny k instalaci zleva doprava (s hlavní směřující dopředu). Drážka má progresivní zkosení pro snadnější instalaci. Jednoduše odstraňte zadní mířidlo vaší zbraně a nahraďte je naší montážní lištou, abyste mohli namontovat váš zaměřovač Vortex Viper/Venom, Burris FastFire nebo Docter. Nejsou vyžadovány žádné úpravy zbraně. Naši montážní lištu můžete kdykoli sundat a znovu namontovat zadní mířidlo. Montážní hardware je součástí balení. Instrukce k instalaci Odstraňte zadní mířidlo* Nainstalujte montážní lištu EGW do drážky Utáhněte set šroub (pokud je to aplikovatelné) Umístěte červený bodový zaměřovač na montážní lištu EGW (umístění malého kusu papíru mezi červený bodový zaměřovač a montážní lištu zajistí snadnější demontáž a ochrání zaměřovač před Loctite.) Aplikujte modrý Loctite na přiložené montážní šrouby Utáhněte montážní šrouby momentem 15in/lb 2 Button Head Cap šrouby - Přiložené pro zaměřovače Vortex Viper a Venom 2 Flat Head Cap šrouby - Přiložené pro zaměřovače Burris FastFire a Docter Pro instalaci šroubů, které jsou součástí tohoto montáže, je vyžadován imbusový klíč o velikosti 5/64\".
Upozornit na dostupnost
Neznáma dostupnost
Vlastnosti: Barevný: Black Make: Ruger Material: Aluminum Model: PC Carbine Number of Bases: 1-Piece Style: Taktický

Atributy

Color: Black Material: Aluminum Model: PC Carbine Number of Bases: 1-Piece Style: Taktický Udělat: Ruger Dodací hmotnost: 0,041kg Výška přepravy: 25mm Šířka přepravy: 89mm Délka přepravy: 140mm

Detail produktů

Made in USA




Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Novinky