Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

EGW
NEF/H&R HANDI RIFLE PICATINNY SCOPE MOUNT

841370106585 296000794
This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). This mount fits: NEF Handi Rifle H&R Handi Rifle H&R Classic Carbine H&R 1871
1299 1299 1 CZK
New
Produkt č.: 296000794
EGW NEF/H&R HANDI RIFLE 1-PIECE PICATINNY BASE 0 MOA
Číslo výrobce: 46200 841370106585 Tato montáž je standardně vybavena zkosením na obou stranách, což ji činí oboustranně použitelnou. EGW doporučuje změřit rozteč děr ve vašem přijímači, aby se potvrdilo, že odpovídá rozměrům, které zveřejnili. Picatinny drážky procházejí celou délkou lišty, což střelci poskytuje flexibilitu při montáži kroužků pro puškohled a dalších příslušenství. Kanál uprostřed snižuje celkovou hmotnost montáže. V mnoha případech také nezakrývá použití továrních železných mířidel. Jednodílné montáže puškohledů od EGW jsou zřejmou volbou pro lovce i taktické střelce. EGW tyto montáže vyrábí ve své dílně na jednom z obráběcích center. Po obrábění jsou montáže broušeny, pískovány a anodizovány typem II pro dlouhou trvanlivost. Instalace: EGW doporučuje použít moment 20 inch lbs a kapku modrého loctite (loctite se prodává samostatně). Tato montáž pasuje na: NEF Handi Rifle H&R Handi Rifle H&R Classic Carbine H&R 1871
1299 CZK 0 1 299,00 Kč *
Předbjednávka, dodací lhůta je přibližně 4-12 týdnů ze skladu z USA.
Vlastnosti: Barevný: Black Elevation: 0 MOA Make: H&R Material: Aluminum Model: Handi-Rifles Number of Bases: 1-Piece Style: Picatinny lišta

Atributy

Color: Black Elevation: 0 MOA Material: Aluminum Model: Handi-Rifles Number of Bases: 1-Piece Style: Picatinny lišta Udělat: H&R Dodací hmotnost: 0,091kg Výška přepravy: 25mm Šířka přepravy: 89mm Délka přepravy: 229mm

Detail produktů

Made in USA



This mount comes standard with a bevel on both sides making it ambidextrous. EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). This mount fits: NEF Handi Rifle H&R Handi Rifle H&R Classic Carbine H&R 1871
Novinky