Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika
592046792358 100015709
The lugs are designed to fit snuggly, with minimum movement, to keep the nut from getting damaged. The inside of the wrench will fit over most standard A1 and A2 flash hiders, as well as Yankee Hill and others. The outside of the wrench fits nicely inside the stock handguard. There are two wrench flats for a 15/16 open end wrench or crows foot wrench, if you want to use a torque wrench. This is the Professional/Gunsmith version of the barrel nut wrench for the Smith & Wesson M&P 15-22. You will get many years of trouble free use from this barrel nut wrench. This wrench will fit over most standard diameter muzzle devices, such as the A2 birdcage, but the barrel nut and handguard end cap will not. Therefore, you have to remove the muzzle device to remove the barrel nut and barrel. Simple, step-by-step instructions are included. Machined from the highest quality U.S. aluminum stock available. Designed, developed, and manufactured in the USA.  
1149 1149 1 CZK
Produkt č.: 100015709
TACTICOOL22 M&P 15-22 BARREL NUT WRENCH
Číslo výrobce: BNW1PRO 592046792358 Lapky jsou navrženy tak, aby perfektně pasovaly s minimálním pohybem a zabránily poškození matice. Vnitřek klíče pasuje přes většinu standardních A1 a A2 úsťových brzd, stejně jako Yankee Hill a další. Vnější strana klíče se pěkně vejde do standardní pažby. Klíč má dvě plochy pro 15/16 otevřený klíč nebo klíč na vránu, pokud chcete použít momentový klíč. Toto je profesionální/armařská verze klíče na matici hlavně pro Smith & Wesson M&P 15-22. Tento klíč vám poskytne mnoho let bezproblémového používání. Klíč pasuje přes většinu standardních úsťových zařízení, jako je A2 birdcage, ale matice hlavně a koncový kryt pažby ne. Proto musíte odstranit úsťové zařízení, abyste mohli odstranit matici hlavně a hlaveň. Součástí jsou jednoduché, krok za krokem instrukce. Vyfrézováno z nejkvalitnějšího dostupného amerického hliníkového materiálu. Navrženo, vyvinuto a vyrobeno v USA.
1149 CZK 10 1 149,00 Kč *
Dodací lhůta je přibližně 14-21 dní.
Více než 10 ks. skladem USA

Atributy

Dodací hmotnost: 0,068kg Výška přepravy: 32mm Šířka přepravy: 32mm Délka přepravy: 254mm

Detail produktů

Made in USA




The lugs are designed to fit snuggly, with minimum movement, to keep the nut from getting damaged. The inside of the wrench will fit over most standard A1 and A2 flash hiders, as well as Yankee Hill and others. The outside of the wrench fits nicely inside the stock handguard. There are two wrench flats for a 15/16 open end wrench or crows foot wrench, if you want to use a torque wrench. This is the Professional/Gunsmith version of the barrel nut wrench for the Smith & Wesson M&P 15-22. You will get many years of trouble free use from this barrel nut wrench. This wrench will fit over most standard diameter muzzle devices, such as the A2 birdcage, but the barrel nut and handguard end cap will not. Therefore, you have to remove the muzzle device to remove the barrel nut and barrel. Simple, step-by-step instructions are included. Machined from the highest quality U.S. aluminum stock available. Designed, developed, and manufactured in the USA.  
Novinky