Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

EGW
H&K VP9, P30, HK45, VP40 LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370114221 296000683
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount is not intended for use with the optics ready version of these pistols. This mount does not fit: HK USP
0 0 1 CZK
New
Produkt č.: 296000683
EGW H&K VP9, P30, HK45, VP40 LEUPOLD DELTAPOINT PRO SIGHT MNT
Číslo výrobce: 49408 841370114221 Montážní základny pro červené bodové zaměřovače EGW jsou určeny k instalaci zleva doprava (s hlavní směřující vpřed). Drážka má progresivní zužování pro snadnější montáž. Jednoduše odstraňte zadní mířidlo vaší zbraně a nahraďte je montážní základnou EGW, abyste mohli namontovat váš Leupold DeltaPoint Pro, JPoint, Redfield Accelerator nebo Optima červený bodový zaměřovač. Montážní základnu můžete kdykoliv odstranit a znovu nasadit zadní mířidlo. Montážní hardware je součástí balení. Instrukce pro instalaci Odstraňte zadní mířidlo* Nainstalujte montážní základnu EGW do drážky Utáhněte nastavitelný šroub (pokud je přítomen) Umístěte červený bodový zaměřovač na montážní základnu EGW (umístění malého kousku papíru mezi zaměřovač a základnu zajistí snazší odstranění a ochrání zaměřovač před Loctite.) Aplikujte modrý Loctite na přiložené montážní šrouby Utáhněte montážní šrouby s momentem 15in/lbs Modifikace vaší zbraně může zrušit záruku výrobce. Tento produkt by měl být instalován a kontrolován kvalifikovaným zbrojířem. Za škody nebo zranění, které mohou vzniknout nesprávnou instalací nebo použitím tohoto produktu, není vyjádřena ani předpokládána žádná odpovědnost. Tato montážní základna není určena pro použití s verzemi těchto pistolí připravenými pro optiku. Tato montážní základna neodpovídá: HK USP
Upozornit na dostupnost
Neznáma dostupnost
Vlastnosti: Barevný: Black Make: Heckler & Koch Material: Aluminum Model: P30, 45, 45C, VP9, P30L, VP40, VP9SK, P30sk Number of Bases: 1-Piece Style: Taktický

Atributy

Color: Black Material: Aluminum Model: P30L,45,P30,45C,VP9SK,VP9,VP40,P30sk Number of Bases: 1-Piece Style: Taktický Udělat: Heckler & Koch Dodací hmotnost: 0,045kg Výška přepravy: 25mm Šířka přepravy: 76mm Délka přepravy: 140mm

Detail produktů

Made in USA



EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount is not intended for use with the optics ready version of these pistols. This mount does not fit: HK USP
Novinky