Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

EGW
DESERT EAGLE (PRE 2017) TRIJICON RMR SIGHT MOUNT

841370116737 296000562
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Trijicon RMR Please take note to the Pre 2017 and Post 2017 differences when placing your order. Pre 2017 rear shelf behind the dovetail is .187" Post 2017 rear shelf behind the dovetail is .120" Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trjicon RMR The flat head screws that are included with this mount require a 5/64'' allen wrench for installation.
1999 1999 1 CZK
Produkt č.: 296000562
EGW DESERT EAGLE (PRE 2017) TRIJICON RMR SIGHT MOUNT
Číslo výrobce: 49503 841370116737 Materiál: Hliník 7075 Povrchová úprava: Matný černý tvrdý povlak Celková délka: 1.811" Celková šířka: .99" Montážní hardware: (2) ploché hlavové šrouby 6-32, (1) závrtný šroub 6-32 Kompatibilita s červeným bodem: Trijicon RMR Všimněte si prosím rozdílů mezi verzemi Pre 2017 a Post 2017 při zadávání vaší objednávky. Pre 2017 zadní polička za drážkou je .187" Post 2017 zadní polička za drážkou je .120" Jednoduše odstraňte zadní mířidlo vaší zbraně a nahraďte jej naším montážním dílem pro uchycení vašeho Trijicon RMR. Nejsou vyžadovány žádné úpravy. Naši montáž můžete kdykoli sundat a znovu nasadit zadní mířidlo. Montážní hardware je součástí balení. Instrukce pro instalaci Odstraňte zadní mířidlo* Nainstalujte montáž EGW Sight Mount do drážky Utáhněte závrtný šroub (pokud je přítomen) Umístěte červený bodový zaměřovač na montáž EGW Sight Mount (umístění malého kousku papíru mezi červený bodový zaměřovač a montáž zajistí snazší odstranění a ochrání před Loctitem.) Aplikujte modrý Loctite na přiložené montážní šrouby Utáhněte montážní šrouby na 15in/lbs 2 ploché hlavové šrouby - Poskytnuty pro Trijicon RMR Ploché hlavové šrouby, které jsou součástí tohoto montážního dílu, vyžadují k instalaci imbusový klíč 5/64".
1999 CZK 0 1 999,00 Kč *
Upozornit na dostupnost
Vyprodáno. Není znám přesný termín dodání
Vlastnosti: Barevný: Black Make: Magnum Research Material: Aluminum Model: Desert Eagle Number of Bases: 1-Piece Style: Taktický

Atributy

Color: Black Material: Aluminum Model: Desert Eagle Number of Bases: 1-Piece Style: Taktický Udělat: Magnum Research Dodací hmotnost: 0,041kg Výška přepravy: 25mm Šířka přepravy: 89mm Délka přepravy: 140mm

Detail produktů

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Trijicon RMR Please take note to the Pre 2017 and Post 2017 differences when placing your order. Pre 2017 rear shelf behind the dovetail is .187" Post 2017 rear shelf behind the dovetail is .120" Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trjicon RMR The flat head screws that are included with this mount require a 5/64'' allen wrench for installation.
Novinky