The TTI Benelli Extended AccuGuide Carrier features an extended guided rail on each side to assist in centering the round while reloading. It will provide you the speed and comfort of not having your thumb torn up after reloading whether you are a 3-Gunner, a trap and skeet shooter, or you shoot for recreation. This extended carrier is manufactured from one solid piece of SAE 304 Stainless Steel, which eliminates the need for welding. It is heat-treated, and extremely polished, providing optimal performance.
SPECS: Drop-in with Benelli M1/M2/M3/M4 RIGHT handed 12 gauge. Can be fitted to Montefeltro, Versamax, and Super Black Eagle, but REQUIRES welding (adding material) and custom installation.
Další...
Rozšířený nosič TTI Benelli Extended AccuGuide je vybaven prodlouženou vodící lištou na obou stranách, která pomáhá při nabíjení středu náboje. Poskytne vám rychlost a pohodlí při nabíjení bez toho, aby vám po nabíjení byl roztrhaný palec, ať už jste střelec ve 3-Gun, střelec na trap a skeet, nebo střílíte pro zábavu. Tento prodloužený nosič je vyroben z jednoho kusu nerezové oceli SAE 304, což eliminuje potřebu svařování. Je tepelně zpracovaný a extrémně leštěný, což zajišťuje optimální výkon.
SPECS: Snadná montáž do Benelli M1/M2/M3/M4 pro praváky, ráže 12. Lze přizpůsobit pro Montefeltro, Versamax a Super Black Eagle, ale VYŽADUJE svařování (přidání materiálu) a speciální instalaci.
Počet hodnocení: 3
Od brownells.com: 3
Průměrné hodnocení: 5
Taran Tactical Innovations Delivers(10.12.2014)
Prior to Taran Tactical Innovations release of this Benelli M2 solid shell lifter, you would have to remove your stock Benelli lifter and send it off to have it welded closed on the end. The stock lifter can give what is called "Benelli Thumb", due to its sharp half moon cut at the end of the lifter. Installation of the Taran Tactical Innovations lifter is a easy to moderately difficult task, depending on your skill level and aptitude. A you tube video is available from a non affiliated company on how to do the install. I recommend it to anyone with a Benelli M2 and don't know of any marks against it. TTI is the only one to my knowledge to make a product that is a drop in factory replacement for your Benelli M2 shell lifter.
must have for M2(16.3.2017)
must have for benelli m2, stops the pinch on thumb when loading.
Fitting required for Girsan MC 312(14.2.2018)
Works very well, leaving this review to let people know that this can be made to fit in the Girsan MC312. There is about 5mm too much material a the back of the carrier (between the âlegsâ) 5 min with a dremel cutoff and polishing wheel and it fits like a charm
Produkt č.: 100015582 TARAN TACTICAL INNOVATIONS BENELLI ACCUGUIDE EXTENDED CARRIER Číslo výrobce: BNLICRLFT Rozšířený nosič TTI Benelli Extended AccuGuide je vybaven prodlouženou vodící lištou na obou stranách, která pomáhá při nabíjení středu náboje. Poskytne vám rychlost a pohodlí při nabíjení bez toho, aby vám po nabíjení byl roztrhaný palec, ať už jste střelec ve 3-Gun, střelec na trap a skeet, nebo střílíte pro zábavu. Tento prodloužený nosič je vyroben z jednoho kusu nerezové oceli SAE 304, což eliminuje potřebu svařování. Je tepelně zpracovaný a extrémně leštěný, což zajišťuje optimální výkon.
3049CZK03 049,00 Kč
*
Předbjednávka, dodací lhůta je přibližně 4-12 týdnů ze skladu z USA.
The TTI Benelli Extended AccuGuide Carrier features an extended guided rail on each side to assist in centering the round while reloading. It will provide you the speed and comfort of not having your thumb torn up after reloading whether you are a 3-Gunner, a trap and skeet shooter, or you shoot for recreation. This extended carrier is manufactured from one solid piece of SAE 304 Stainless Steel, which eliminates the need for welding. It is heat-treated, and extremely polished, providing optimal performance.
SPECS: Drop-in with Benelli M1/M2/M3/M4 RIGHT handed 12 gauge. Can be fitted to Montefeltro, Versamax, and Super Black Eagle, but REQUIRES welding (adding material) and custom installation.
Další...
Rozšířený nosič TTI Benelli Extended AccuGuide je vybaven prodlouženou vodící lištou na obou stranách, která pomáhá při nabíjení středu náboje. Poskytne vám rychlost a pohodlí při nabíjení bez toho, aby vám po nabíjení byl roztrhaný palec, ať už jste střelec ve 3-Gun, střelec na trap a skeet, nebo střílíte pro zábavu. Tento prodloužený nosič je vyroben z jednoho kusu nerezové oceli SAE 304, což eliminuje potřebu svařování. Je tepelně zpracovaný a extrémně leštěný, což zajišťuje optimální výkon.
SPECS: Snadná montáž do Benelli M1/M2/M3/M4 pro praváky, ráže 12. Lze přizpůsobit pro Montefeltro, Versamax a Super Black Eagle, ale VYŽADUJE svařování (přidání materiálu) a speciální instalaci.
Počet hodnocení: 3
Od brownells.com: 3
Průměrné hodnocení: 5
Taran Tactical Innovations Delivers(10.12.2014)
Prior to Taran Tactical Innovations release of this Benelli M2 solid shell lifter, you would have to remove your stock Benelli lifter and send it off to have it welded closed on the end. The stock lifter can give what is called "Benelli Thumb", due to its sharp half moon cut at the end of the lifter. Installation of the Taran Tactical Innovations lifter is a easy to moderately difficult task, depending on your skill level and aptitude. A you tube video is available from a non affiliated company on how to do the install. I recommend it to anyone with a Benelli M2 and don't know of any marks against it. TTI is the only one to my knowledge to make a product that is a drop in factory replacement for your Benelli M2 shell lifter.
must have for M2(16.3.2017)
must have for benelli m2, stops the pinch on thumb when loading.
Fitting required for Girsan MC 312(14.2.2018)
Works very well, leaving this review to let people know that this can be made to fit in the Girsan MC312. There is about 5mm too much material a the back of the carrier (between the âlegsâ) 5 min with a dremel cutoff and polishing wheel and it fits like a charm