Přes 300 000 zákazníků - děkujeme vám!

40 000+ produktů pro lov a střelbu

Objevte JAG BORE TECH .17 CAL. JAG pro efektivní čištění hlavně! 🚀 Speciální slitina bez mědi a zdvojnásobená čistící plocha.

BORE TECH .17 CAL. JAG

667739300179 509000122

Top takeaways

  • Gentle on bore surfaces
  • Eliminates false fouling indications
  • Double effective cleaning area

Atributy

  • Caliber: 17 Caliber
  • Dodací hmotnost: 0,005kg
  • UPC: 667739300179

Detail produktů

Made in USA
  • Specifikace:
  • Kalibr: 17 Caliber
0 0 1 CZK
  • Specifikace:
  • Kalibr: 17 Caliber

Popis:

Zobrazit originál (anglicky)
Vyrobeno z unikátní slitiny bez mědi, která je šetrná k vývrtu jako mosaz, a zároveň eliminuje falešné indikace modrého měděného znečištění na hadříku. Drží hadřík pevně na dvou místech, čímž zdvojnásobuje účinnou čistící plochu. Reverzní zúžení se samo navádí do vývrtu. SPECIFIKACE: Proprietární slitina bez mědi. Přibližně 21?4" (5.7cm) dlouhé. .17 kal. - 5-40 samčí závity. .22 a .30 kal. - 8-32 samčí závity.

Top takeaways

  • Gentle on bore surfaces
  • Eliminates false fouling indications
  • Double effective cleaning area

Atributy

  • Caliber: 17 Caliber
  • Dodací hmotnost: 0,005kg
  • UPC: 667739300179

Detail produktů

Made in USA

Recenze zákazníků

Hodnocení zákazníků (2)

3 / 5
Nedoporučuji

Brownells USA Too big for .308 bore 1.8.2015

Just received. Looked forward to using. Put on a standard round patch soaked in Butch's. Would not go down barrel. Some difficulty removing.

Rozhodně doporučuji

Brownells USA A really nice jag 10.7.2011

A bore jag is such a simple concept, and basic item, you'd think that there isn't much thought that needs to go into its design. But Bore Tech was indeed thoughtful when they made their version of the lowly jag.

First off, it doesn't give a copper indication. Great. Works as advertised.

Second, the alloy used won't scratch the bore, at least from what I've seen.

But they take this point a step further, even though they don't say it... They gave it a highly polished finish. Finish is just as, if not more, important than the material used. A rough finish (like what I've seen on some of my brass jags) is more likely to scratch. Good job!

I'm guessing that this finish is -not- a plating, as it's described as "Machined from a special copper-free alloy..." but I didn't want to take a file to the jag to verify this. (Platings can chip in the long term, making sharp ridges that can scratch.)

The reverse taper that they mention is so when you pull the jag back (after pushing the patch) it doesn't grab, and potentially nick, the muzzle crown. They also extended this treatment near the base of the threads. It works.

One last point, so to speak, is the point. It is sharp enough to easily pierce the cotton patches, but they also made it nice and long so as to hold the patch in place while you maneuver the cleaning rod back into place with a fresh patch. They didn't mention this feature, but it certainly helps.

Yes, it's pricier than a lot of other jags, but in this case it's worth every penny. I anticipate a lifetime of use.

Věděli jste?

Informace o výrobci

Odpovědný hospodářský subjekt podle nařízení EU

Brownells Arms s.r.o.
Bílanská 1861/81
76701 Kroměříž
Česká republika
info@brownells.cz

Jejda! Něco se pokazilo.

Narazili jsme na chybu při načítání obsahu. Obnovte stránku a zkuste to znovu. Pokud problém přetrvává, kontaktujte naši zákaznickou podporu.

Zpět na začátek