Košík je prázdný.

Košík

WILD WEST GUNS
TRIGGER-HAPPY KIT

854083001009 981000004

Gives A Light, Clean Break, Without The "Flop"

Precision, EDM trigger and hand polished sear provide a crisp, clean 2 to 3 pound trigger pull. Unique, two-piece design eliminates annoying flop of the Marlin factory trigger. Produced to minimum tolerances, gives a safe, light trigger that helps improve accuracy for hunters; helps give Cowboy shooters that winning edge. Drop-in fit; installation requires complete action disassembly.

Will only replace Marlin Centerfire 2 piece triggers, does not fit early Marlins with a 1 piece trigger.

SPECS: Tool steel. Blue, matte finish or Nickel, silver finish. Hardened engagement surfaces. Fits all modern Marlin centerfire rifles; 1895, 1895G, 1895GS,1895M, 450M, 444, 336, and 1894 models. Will only replace Marlin Centerfire 2 piece triggers, does not fit early Marlins with a 1 piece trigger.

Další...

Poskytuje lehký, čistý tah, bez "klopení"

Přesná, EDM spoušť a ručně leštěný zápalník poskytují čistý, ostrý tah spouště od 2 do 3 liber. Unikátní dvoudílný design eliminuje nepříjemné klopení tovární spouště Marlin. Vyrobeno s minimálními tolerancemi, poskytuje bezpečnou, lehkou spoušť, která pomáhá zlepšit přesnost pro lovce; pomáhá cowboy střelcům získat vítěznou výhodu. Jednoduchá montáž; instalace vyžaduje kompletní demontáž mechanismu.

Vymění pouze dvoudílné spouště Marlin Centerfire, není kompatibilní s ranými modely Marlin s jednodílnou spouští.

SPECS: Nástrojová ocel. Modré, matné provedení nebo nikl, stříbrné provedení. Zpevněné styčné plochy. Vhodné pro všechny moderní pušky Marlin centerfire; 1895, 1895G, 1895GS,1895M, 450M, 444, 336 a 1894 modely. Vymění pouze dvoudílné spouště Marlin Centerfire, není kompatibilní s ranými modely Marlin s jednodílnou spouští.

Další...

Hodnocení zákazníků pro položku WILD WEST GUNS MARLIN TRIGGER-HAPPY KIT, BLUE

Počet hodnocení: 31
Od brownells.com: 31
Průměrné hodnocení: 4,5

WILD WEST GUNS HAPPY TRIGGER KIT (1.10.2012)

VERY WELL MADE TRIGGER FITTED RIGHT IN SO SIMPLE AND WHAT A BIG DIFFERENCE IT MADE TO MY MARLIN 336 SS THANKS WILD WEST GUNS AND BROWNELLS FOR AN EXCELLENT PRODUCT

Excellent product, superb result (4.9.2014)

I installed the Happy Trigger in my JM-marked Marlin .45-70 Guide Gun last night in under an hour. The only reason it took that long is that I also polished up a few other bearing surfaces in the action. No instructions were included, but high quality instructions are easily found online.

The original trigger had a slightly rough pull that measured at 3lbs, so it was quite acceptable to begin with. After replacement, it measured out at 2-1/8th lbs with extremely little variation from one pull to the next, and is exceptionally crisp. You've heard the phrase "Breaking a glass rod" before? It's a perfect description for the end result which is completely free of creep, grittiness or drag of any sort.

Note that I did not have to polish the sear engagement surface on the hammer at all as it was fairly well machined and was without any burrs or roughness. The sear on the original trigger was however very rough and uneven. It was machined more heavily on one side than the other, and was not engaging un a uniform manner with the sear engagement surface on the hammer. The Happy Trigger sear is laser straight and machined without any roughness whatsoever. As it should be!

Money well spent indeed.

Regards

Yow what a difference! (13.10.2014)

Recently bought an 1894 in .44 magnum. The factory trigger challenged any hope for accuracy at around 8#. Did some research, apparently got the last Trigger Happy kit available here (in nickel, though my rifle is blued-- looks pretty good!) Installed it myself courtesy of some good instructions I found on the internat, and also added a Wolff hammer spring. Now I have a 2.5# trigger and the gun is a different animal! Highly recommended.

Great trigger! (15.3.2015)

Installed this trigger in my 308 Mxlr. Factory trigger on my gun was very stiff and this has lightened it up significantly. Was able to install without much issue, just followed a tutorial. Very pleased and would purchase again in an instant.

Trigger is a blessing (5.5.2016)

Dropped the trigger in 457 Mag and what a difference, when you are on a Bigger Caliber it's a bit of a difference even a Hot load 45/70 , much less the factory loads . Any way easy in and I can tell the trigger is under 4 lbs , I've got a couple big calibers and I am dropping 1 in them all. Tightens every thing up.

Trigger Ecstasy (14.5.2018)

This trigger was easy to install with no fitting required. I have a new Marlin 1894, and had no issues what so ever installing this trigger. The factory trigger pull weight was about 6.5 lbs on my particular rifle. The Nickel Happy Trigger I installed tested consistent at 1 lb 9 oz which may be a little light for some folks but perfect for me. I highly recommend this trigger to anyone who likes a light trigger pull with a crisp break and no take up. Also added the wolf reduced spring kit. love the hammer spring but the lever release spring is pretty light, perfect for cowboy action shooting I suppose.

Easy drop in fit, solid improvement (7.10.2009)

Replaced the trigger in my Marlin 1895 guide gun. Pull dropped from 6 lbs to 3.5 lbs, crisp and no creep. Easy to install.

Huge improvement over factory trigger (7.12.2009)

This is a wonderful upgrade to my 444 Marlin.
It is nice & crisp with no takeup & very little overtravel, compared to factory trigger it is the difference between night & day. No trigger scale to check poundage..sorry but 50% less would be my estimate. Great trigger nuff said.
Rusty

A lot better than factory (17.3.2010)

Nice trigger easy to install. Wish it was a little lighter on the pull (3lbs)

Incredable improvement (29.6.2010)

The original trigger is by far the worst part on the marlin 336. Changing it to the wild west trigger offers you a new world. It is excellent but expensive. Did the replacement on my own.

Piece O' Cake!!!! (17.2.2011)

This Trigger is awesome. The original factory triggers have so much flop that you would think they were broke if you didn't know better. Not this one, with it installed it there is no flop and along with just polishing the hammer where it meets up with the trigger you can get this down to a crisp 2 pound pull. You already have the hammer out its worth the 5 mins. to to polish it up. A true Drop-In no fitting at all has to be done.

Trigger Happy is a happy trigger (3.4.2011)

I don't know why this isn't Marlin's stock trigger. It takes all the slop out of the trigger, which the stock trigger is known for. You now have a crisp trigger which makes the gun more accurate. The quality of the trigger is a big selling point for many guns. With this trigger in your gun, you will be much happier with it. How does it work? The edge that engages the sear is narrower, so the trigger doesn't move except to fire the gun. Simple, and it works.

Not So Happy Trigger (31.5.2011)

Did not fit my Marlin 336
1955 year model 35 rem
The amount of fitting required would excessive to get any kind of fit. Bought it because of all the good reviews, maybe it just fits newer Marlins??

Not too impressed (20.6.2011)

Read all the great reviews and decided to drop this in my 1895 Guide Gun. Installation was easy enough, and it does completey eliminate the "Marlin Flop" I am however, disappointed in the final triger pull. Before the install, my lyman gauge measured the pull at 4lbs 10 oz. After, I was at 5 lbs 8 oz, almost a full pound heavier.I understand a trigger job will get this lower, but I shouldnt have to spend $80 in gunsmithing to make an [$] trigger work.

GREAT (27.8.2011)

put this in my 1895, 45-70 and got a night and day diffrence in the trigger....this is a must have for the heavy trigger pulls on most marlins...do it yourself installation....

Great Product (4.2.2012)

I have installed this kit on a 336C 30-30 and on an 1895 SBL 45-70. One blue and the other stainless. Both were easy to install and remove the trigger flop as well as any creep in the trigger. Both of my trigger pull weights came down at least 1 lb per gun. Trigger pull on my 1895 is now a clean 3lbs and my 336C is a clean 3.5 lbs. Note: You are changing trigger parts so make sure you test for safety after you install. If you don't know much about triggers this might not be for you.

Excellent Results (9.2.2012)

Used this trigger along with a spring kit (Brownels) to get a crisp, cosistant, clean breaking 2 1/2lb (measured with digital trigger pull gauge)trigger pull- and no trigger flop. Instalation took about 30 minutes with no filing, fitting, or fideling arount. Accompanying instruction are clear enough, but really not needed as the installation is straight forward - take out the factory trigger, put in the new. Owner has been using firearm in cowboy action shooting and really couldn't believe the difference in before and after.

Well made, Looks and works well. (21.2.2012)

I installed this in an older 336 (mid 80 ) gun. It took a lot of work ie fitting and polishing to get in . Once done it works great very crisp trigger pull ,and no slop . I also polished the hammer since it was on the bench ,made a nice job.

The best Marlin upgrade. (6.5.2012)

This is the best upgrade you can do for your Marlin 1895 in .450 Marlin. Lighter pull than the factory, no slop in the pull and as long as you know the basics about your guns internals it is pretty easy to install. Haven't measured the pull weight but you most definitely can feel the difference. Kinda like replacing an old k98 Mauser trigger with a Timney Sportsman. The only thing that would improve this trigger is if it had about a pound and a half pull. I like them light.

Very hard (4.6.2012)

This product is very hard. It removed all the flop from my action. I am a very trigger happy person now.

Spend the money, It's worth it (10.11.2012)

The Marlin Guide gun has been on my bucket list for quite awhile. I finally bought one about 6 months ago, and love the gun with the exception of the trigger. If you don't know what creep means, pull the trigger on a Marlin. Last night I tore the gun down using one of the several tutorials I found on line. While I had it all apart, I polished all the parts and installed the new trigger. It's fantastic. In the comments someone posed the question, why doesn't Marlin just start using this type of design in their new guns? That is a good question. When you put it back together, don"t tighten the screws on the receiver until you get the hammer screw back in. It took me about 15 minutes of head scratching to figure out why I couldn't get the hammer screw holes to line up. The price only hurts until you see the results, and I learned a lot about the gun in the process.

It did help, but it did not get the 3lb (25.11.2012)

The trigger is easy to install. There is plenty of help on the internet. It was advertized to be a 3lb trigger. In my case the Marlin 336 was new and the trigger pull was off the gauge. After installing this trigger the pull was about 6 1/4 lbs. This does not sound very good but it did make a huge difference from what it was originally. I would recommend this trigger to lighten a very heavy one. It is well built and it dropped right in with no fitting. Just do not expect a target trigger.

Simple No Fit Install (25.1.2013)

No fitting required install in my post Remington buy-out Marlin 336C. Vast improvement in the trigger pull when coupled with the Brownells spring kit 080-000-192WB. Instructions are not included but step by step install go-by's are easily googled up.

Shockingly good upgrade (19.8.2014)

The price felt a bit steep when I first received the internationally shipped package, but after install I was truly amazed.

The trigger on my 336 was very stiff, and I expected this to help a little. But it must have removed what felt like half the amount of force required to pull the trigger, and changed my rifle completely.

It might just be a small part for $90 but I was indeed worth it!

Made me happy! (17.6.2015)

It was truly drop-in part in my Marlin 444P Outfitter. It took about an hour to install... and I was taking my time to also do a detail cleaning. The trigger pull is noticeably lighter, but it's no "hair-trigger." The break is extremely crisp. This is a great upgrade for a hunting gun if you are unsatisfied with your current trigger pull.

What a difference (1.2.2016)

Easy to install, installed it went out back and happilly put 20 rounds down range its now a tack driver so thrilled

Great Upgrade (2.3.2016)

This trigger is a great upgrade to my Marlin 336! I wish that I had added years ago. I have never been happy with the stock trigger, but wasn't sure about spending the money to replace it. The improvement was worth every penny!!

Wonderful trigger (21.7.2017)

Took 15 minutes to change and took the trigger pull from 10 lbs to 4 1/2 lbs.

Excellent design. (26.10.2017)

This is a well thought out product. It took me about twenty minutes from start to finish to install. On my 1894, the trigger pull measured 2.8 pounds after installation. It is a crisp clean break. I found no weaknesses in it. In my rifle, it was a true drop in fit.

Greatly Improved Trigger pull (10.12.2017)

I installed this trigger in an old Marlin 336 that had the worst trigger I've ever seen in a Marlin 336. It was 8 1/2 to well over 9 lbs when I 1st bought the rifle used. This Wild West Trigger installed with no fitting required at all and now I have a 3 1/2 to 4 lb pull. Very pleased with the results.

TRIGGER FLOP GONE, REDUCED TRIGGER PULL (23.9.2018)

Reduced trigger pull from 5.5 lbs to 3.5 lbs on my Marlin 336. It's a really nice clean break with no flop. Only reason I didn't give it 5 stars is that I wish it was a tad cheaper. But would recommend it.

Přečtete si další hodnocení na webu brownells.com

4699 4699 2 CZK

Produkt č.: 981000004
WILD WEST GUNS MARLIN TRIGGER-HAPPY KIT, BLUE
Číslo výrobce: 5172 854083001009 Přesná, EDM spoušť a ručně leštěný zápalník poskytují čistý, ostrý tah spouště od 2 do 3 liber. Unikátní dvoudílný design eliminuje nepříjemné klopení tovární spouště Marlin. Vyrobeno s minimálními tolerancemi, poskytuje bezpečnou, lehkou spoušť, která pomáhá zlepšit přesnost pro lovce; pomáhá cowboy střelcům získat vítěznou výhodu. Jednoduchá montáž; instalace vyžaduje kompletní demontáž mechanismu.

4699 CZK 0 4 699,00 Kč *

Předbjednávka, dodací lhůta je přibližně 4-12 týdny ze skladu z USA.

Vlastnosti: Make: Marlin Model: 1895, 1894, 336 Style: Kit

Vložit do nákupního seznamu

Zeptejte se

Podrobnosti

Vložit do nákupního seznamu

Zeptejte se

Top takeaways

TRIGGER-HAPPY KIT nabízí přesný EDM mechanismus a ručně leštěný zápalník pro čistý, ostrý tah spouště od 2 do 3 liber.
Unikátní dvoudílný design eliminuje klopení tovární spouště Marlin a zlepšuje přesnost střelby.
Vhodné pro moderní pušky Marlin centerfire modely 1895, 1894, 336; instalace vyžaduje kompletní demontáž mechanismu.

Atributy

Model: 1894,1895,336 Style: Kit Udělat: Marlin Dodací hmotnost: 0,005kg Výška přepravy: 18mm Šířka přepravy: 46mm Délka přepravy: 102mm

Detail produktů

Made in USA
US exportní klasifikace: 0A501.c

Produkt č.: 981000017
WILD WEST GUNS MARLIN TRIGGER-HAPPY KIT, NICKEL
Číslo výrobce: NONE 854083001016 Přesná, EDM spoušť a ručně leštěný zápalník poskytují čistý, ostrý tah spouště od 2 do 3 liber. Unikátní dvoudílný design eliminuje nepříjemné klopení tovární spouště Marlin. Vyrobeno s minimálními tolerancemi, poskytuje bezpečnou, lehkou spoušť, která pomáhá zlepšit přesnost pro lovce; pomáhá cowboy střelcům získat vítěznou výhodu. Jednoduchá montáž; instalace vyžaduje kompletní demontáž mechanismu.

4699 CZK 0 4 699,00 Kč *

Předbjednávka, dodací lhůta je přibližně 4-12 týdny ze skladu z USA.

Vlastnosti: Make: Marlin Model: 1895, 1894, 336 Style: Kit

Vložit do nákupního seznamu

Zeptejte se

Podrobnosti

Vložit do nákupního seznamu

Zeptejte se

Top takeaways

Přesná EDM spoušť a ručně leštěný zápalník poskytují čistý, ostrý tah spouště od 2 do 3 liber.
Unikátní dvoudílný design eliminuje nepříjemné klopení tovární spouště Marlin a zlepšuje přesnost.
Vhodné pro moderní pušky Marlin centerfire modely 1895, 1894, 336; instalace vyžaduje kompletní demontáž mechanismu.

Atributy

Model: 1894,1895,336 Style: Kit Udělat: Marlin Dodací hmotnost: 0,005kg Výška přepravy: 15mm Šířka přepravy: 48mm Délka přepravy: 64mm

Detail produktů

Made in USA
US exportní klasifikace: 0A501.c

Zlepšete přesnost s TRIGGER-HAPPY KIT od WILD WEST GUNS pro pušky Marlin. Lehké, přesné spouště pro lovce i cowboy střelce. 🏹🔫 Naučte se více!

Gives A Light, Clean Break, Without The "Flop"

Will only replace Marlin Centerfire 2 piece triggers, does not fit early Marlins with a 1 piece trigger.

Další...

Poskytuje lehký, čistý tah, bez "klopení"

Vymění pouze dvoudílné spouště Marlin Centerfire, není kompatibilní s ranými modely Marlin s jednodílnou spouští.

Další...

Hodnocení zákazníků pro položku WILD WEST GUNS MARLIN TRIGGER-HAPPY KIT, BLUE

Počet hodnocení: 31
Od brownells.com: 31
Průměrné hodnocení: 4,5

WILD WEST GUNS HAPPY TRIGGER KIT (1.10.2012)

VERY WELL MADE TRIGGER FITTED RIGHT IN SO SIMPLE AND WHAT A BIG DIFFERENCE IT MADE TO MY MARLIN 336 SS THANKS WILD WEST GUNS AND BROWNELLS FOR AN EXCELLENT PRODUCT

Excellent product, superb result (4.9.2014)

Yow what a difference! (13.10.2014)

Great trigger! (15.3.2015)

Trigger is a blessing (5.5.2016)

Trigger Ecstasy (14.5.2018)

Easy drop in fit, solid improvement (7.10.2009)

Replaced the trigger in my Marlin 1895 guide gun. Pull dropped from 6 lbs to 3.5 lbs, crisp and no creep. Easy to install.

Huge improvement over factory trigger (7.12.2009)

A lot better than factory (17.3.2010)

Nice trigger easy to install. Wish it was a little lighter on the pull (3lbs)

Incredable improvement (29.6.2010)

The original trigger is by far the worst part on the marlin 336. Changing it to the wild west trigger offers you a new world. It is excellent but expensive. Did the replacement on my own.

Piece O' Cake!!!! (17.2.2011)

Trigger Happy is a happy trigger (3.4.2011)

Not So Happy Trigger (31.5.2011)

Did not fit my Marlin 336
1955 year model 35 rem
The amount of fitting required would excessive to get any kind of fit. Bought it because of all the good reviews, maybe it just fits newer Marlins??

Not too impressed (20.6.2011)

GREAT (27.8.2011)

put this in my 1895, 45-70 and got a night and day diffrence in the trigger....this is a must have for the heavy trigger pulls on most marlins...do it yourself installation....

Great Product (4.2.2012)

Excellent Results (9.2.2012)

Well made, Looks and works well. (21.2.2012)

The best Marlin upgrade. (6.5.2012)

Very hard (4.6.2012)

This product is very hard. It removed all the flop from my action. I am a very trigger happy person now.

Spend the money, It's worth it (10.11.2012)

It did help, but it did not get the 3lb (25.11.2012)

Simple No Fit Install (25.1.2013)

Shockingly good upgrade (19.8.2014)

Made me happy! (17.6.2015)

What a difference (1.2.2016)

Easy to install, installed it went out back and happilly put 20 rounds down range its now a tack driver so thrilled

Great Upgrade (2.3.2016)

Wonderful trigger (21.7.2017)

Took 15 minutes to change and took the trigger pull from 10 lbs to 4 1/2 lbs.

Excellent design. (26.10.2017)

Greatly Improved Trigger pull (10.12.2017)

TRIGGER FLOP GONE, REDUCED TRIGGER PULL (23.9.2018)

Přečtete si další hodnocení na webu brownells.com

Zákazníci také kupují

A-ZOOM 7MM-08 REMINGTON SNAP CAPS 2/PACK
AMMO SNAP CAP DUMMY ROUNDS

A-ZOOM

Skladem

549,00 Kč * 399,00 Kč - 1 199,00 Kč*

Náboj Dummies | Potřeby pro suchý trénink

4,2

WILD WEST GUNS MAGAZINE FOLLOWER FOR 1895 (.45-70)
MARLIN ALUMINUM MAGAZINE FOLLOWER

WILD WEST GUNS

Skladem

1 699,00 Kč *

Podavače

2,3

Získejte odolné mířidlo pro Marlin 1895 s Ghost Ring a bílou čarou. Ideální pro lovecké a terénní použití. Naučte se více! 🦌🔫

XS SIGHT SYSTEMS MARLIN 1895 GHOST RING DRC WINGED SIGHT SET WHITE
MARLIN 1895 DRC WINGED SIGHT SET

XS SIGHT SYSTEMS

Skladem

4 899,00 Kč *

Soupravy mířidel

4,3

New

🔫 Pozvedněte svou pušku s 1895 MARLIN TOP RAIL! Jednodílná Picatinny lišta z hliníku 6061, délka 6 palců, vojenské specifikace, doživotní záruka. 🇺🇸 Klikněte a zjistěte více!

MIDWEST INDUSTRIES 1895 MARLIN TOP RAIL BLACK PICATINNY
1895 MARLIN TOP RAIL

MIDWEST INDUSTRIES

Skladem

1 649,00 Kč *

Přídavné raily

MARBLE ARMS RIFLE NO. 87 DOVETAIL SLOT BLANK
RIFLE NO. 87 DOVETAIL SLOT BLANK

MARBLE ARMS

Skladem

499,00 Kč *

Záslepky mušky

3,7

Přihlášení

Zapomněli jste heslo?
Zaregistrovat se

Sociální média

Facebook

Mapa stránky

Produktové Kategorie

Objednávaní

Zákaznícký servis

Společnost Brownells je předním světovým dodavatelem zbrojních nástrojů, dílů střelných zbraní a jejich příslušenství, která je na trhu již více než 75 let. S důvěrou se na nás obrací laická i odborná veřejnost.

Internetový obchod Vám nabízí více než 52 000 produktů, ze kterých si vybere i ten nejnáročnější uživatel.

Vaše spokojenost je pro nás velmi důležitá. Proto se snažíme neustále rozšiřovat portfolio produktů. Může se stát, že se zbožím nebudete spokojeni, můžete ho kdykoliv vrátit a dostanete od nás zpět plnou částku nebo nový produkt v uvedené hodnotě.

Chceme být zárukou Vaší spokojenosti!

cf-web-badges-e-ltgray