Machined from a special copper-free alloy that’s as gentle on the bore as brass, while it eliminates false indications of blue copper fouling on the patch. Holds the patch tight in two places, doubling the effective cleaning area. Reverse taper self-guides into bore.
Vyfrézováno ze speciální slitiny bez mědi, která je pro vnitřek hlavně stejně šetrná jako mosaz, zatímco eliminuje falešné indikace modrého usazení mědi na čistící látkové tampónu. Drží tampón pevně ve dvou místech, čímž se zdvojnásobí efektivní čistící plocha. Zúžená opačná část se sama navádí do vnitřku hlavně.
SPECS: Speciální slitina bez mědi. Přibližná délka 21⁄4" (5.7cm). .17 cal. - závit mužský 5-40. .22 & .30 cal. - závit mužský 8-32.
Další...
Hodnocení zákazníků pro položku BORE TECH .17 CAL. JAG
Počet hodnocení: 2
Od brownells.com: 2
Průměrné hodnocení: 3
A really nice jag(10.7.2011)
A bore jag is such a simple concept, and basic item, you'd think that there isn't much thought that needs to go into its design. But Bore Tech was indeed thoughtful when they made their version of the lowly jag.
First off, it doesn't give a copper indication. Great. Works as advertised.
Second, the alloy used won't scratch the bore, at least from what I've seen.
But they take this point a step further, even though they don't say it... They gave it a highly polished finish. Finish is just as, if not more, important than the material used. A rough finish (like what I've seen on some of my brass jags) is more likely to scratch. Good job!
I'm guessing that this finish is -not- a plating, as it's described as "Machined from a special copper-free alloy..." but I didn't want to take a file to the jag to verify this. (Platings can chip in the long term, making sharp ridges that can scratch.)
The reverse taper that they mention is so when you pull the jag back (after pushing the patch) it doesn't grab, and potentially nick, the muzzle crown. They also extended this treatment near the base of the threads. It works.
One last point, so to speak, is the point. It is sharp enough to easily pierce the cotton patches, but they also made it nice and long so as to hold the patch in place while you maneuver the cleaning rod back into place with a fresh patch. They didn't mention this feature, but it certainly helps.
Yes, it's pricier than a lot of other jags, but in this case it's worth every penny. I anticipate a lifetime of use.
Too big for .308 bore(1.8.2015)
Just received. Looked forward to using. Put on a standard round patch soaked in Butch's. Would not go down barrel. Some difficulty removing.
Produkt č.: 509000122 BORE TECH .17 CAL. JAG Číslo výrobce: BTAJ-17-00667739300179 Vyfrézováno ze speciální slitiny bez mědi, která je pro vnitřek hlavně stejně šetrná jako mosaz, zatímco eliminuje falešné indikace modrého usazení mědi na čistící látkové tampónu. Drží tampón pevně ve dvou místech, čímž se zdvojnásobí efektivní čistící plocha. Zúžená opačná část se sama navádí do vnitřku hlavně.
Produkt č.: 509000132 BORE TECH 22 CALIBER PROOF POSITIVE JAG Číslo výrobce: BTAJ-22-CF667739980296 Vyfrézováno ze speciální slitiny bez mědi, která je pro vnitřek hlavně stejně šetrná jako mosaz, zatímco eliminuje falešné indikace modrého usazení mědi na čistící látkové tampónu. Drží tampón pevně ve dvou místech, čímž se zdvojnásobí efektivní čistící plocha. Zúžená opačná část se sama navádí do vnitřku hlavně.
599CZK103599,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. Více než 10 ks. skladem USA
Produkt č.: 509000162 BORE TECH 30 CALIBER PROOF POSITIVE JAG Číslo výrobce: BTAJ-30-00667739980326 Vyfrézováno ze speciální slitiny bez mědi, která je pro vnitřek hlavně stejně šetrná jako mosaz, zatímco eliminuje falešné indikace modrého usazení mědi na čistící látkové tampónu. Drží tampón pevně ve dvou místech, čímž se zdvojnásobí efektivní čistící plocha. Zúžená opačná část se sama navádí do vnitřku hlavně.
599CZK22599,00 Kč
*
Dodací lhůta je přibližně 14-21 dní. Více než 10 ks. skladem USA
Machined from a special copper-free alloy that’s as gentle on the bore as brass, while it eliminates false indications of blue copper fouling on the patch. Holds the patch tight in two places, doubling the effective cleaning area. Reverse taper self-guides into bore.
Vyfrézováno ze speciální slitiny bez mědi, která je pro vnitřek hlavně stejně šetrná jako mosaz, zatímco eliminuje falešné indikace modrého usazení mědi na čistící látkové tampónu. Drží tampón pevně ve dvou místech, čímž se zdvojnásobí efektivní čistící plocha. Zúžená opačná část se sama navádí do vnitřku hlavně.
SPECS: Speciální slitina bez mědi. Přibližná délka 21⁄4" (5.7cm). .17 cal. - závit mužský 5-40. .22 & .30 cal. - závit mužský 8-32.
Další...
Hodnocení zákazníků pro položku BORE TECH .17 CAL. JAG
Počet hodnocení: 2
Od brownells.com: 2
Průměrné hodnocení: 3
A really nice jag(10.7.2011)
A bore jag is such a simple concept, and basic item, you'd think that there isn't much thought that needs to go into its design. But Bore Tech was indeed thoughtful when they made their version of the lowly jag.
First off, it doesn't give a copper indication. Great. Works as advertised.
Second, the alloy used won't scratch the bore, at least from what I've seen.
But they take this point a step further, even though they don't say it... They gave it a highly polished finish. Finish is just as, if not more, important than the material used. A rough finish (like what I've seen on some of my brass jags) is more likely to scratch. Good job!
I'm guessing that this finish is -not- a plating, as it's described as "Machined from a special copper-free alloy..." but I didn't want to take a file to the jag to verify this. (Platings can chip in the long term, making sharp ridges that can scratch.)
The reverse taper that they mention is so when you pull the jag back (after pushing the patch) it doesn't grab, and potentially nick, the muzzle crown. They also extended this treatment near the base of the threads. It works.
One last point, so to speak, is the point. It is sharp enough to easily pierce the cotton patches, but they also made it nice and long so as to hold the patch in place while you maneuver the cleaning rod back into place with a fresh patch. They didn't mention this feature, but it certainly helps.
Yes, it's pricier than a lot of other jags, but in this case it's worth every penny. I anticipate a lifetime of use.
Too big for .308 bore(1.8.2015)
Just received. Looked forward to using. Put on a standard round patch soaked in Butch's. Would not go down barrel. Some difficulty removing.