Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

EGW
DESERT EAGLE LEUPOLD DELTAPOINT PRO SIGHT MOUNT

296000545
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
0 0 1 CZK
New
Produkt č.: 296000545
EGW DESERT EAGLE(POST 2017) LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Číslo výrobce: 49396 Materiál: Hliník 7075 Povrchová úprava: Matný černý Hardcoat Celková délka: 1.811\" Celková šířka: .99\" Montážní hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Kompatibilita s červenými bodovými zaměřovači: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter Montážní lišty od EGW jsou určeny k instalaci zleva doprava (s hledím směřujícím dopředu). Drážka má progresivní zkosení pro snadnější instalaci. Jednoduše odstraňte zadní mířidlo vaší zbraně a nahraďte jej naší montážní lištou pro uchycení zaměřovače Vortex Viper/Venom, Burris FastFire nebo Docter. Nejsou potřeba žádné úpravy. Naši montážní lištu můžete kdykoliv sundat a znovu namontovat zadní mířidlo. Montážní hardware je součástí balení. Instrukce pro instalaci Odstraňte zadní mířidlo* Nainstalujte montážní lištu EGW do drážky Utáhněte zajišťovací šroub (pokud je přítomen) Umístěte červený bodový zaměřovač na montážní lištu EGW (umístění malého kusu papíru mezi zaměřovačem a montážní lištou usnadní pozdější odstranění a zabrání přilnutí Loctite k zaměřovači) Aplikujte modrý Loctite na přiložené montážní šrouby Utáhněte montážní šrouby s momentem 15in/lbs 2 Button Head Cap Screws - Přiloženo pro zaměřovače Vortex Viper a Venom 2 Flat Head Cap Screws - Přiloženo pro zaměřovače Burris FastFire a Docter K šroubům, které jsou součástí tohoto montážního kitu, je potřeba imbusový klíč o velikosti 5/64'' pro instalaci.
Upozornit na dostupnost
Neznáma dostupnost
Vlastnosti: Barevný: Black Make: Magnum Research Material: Aluminum Model: Desert Eagle Number of Bases: 1-Piece Style: Taktický

Atributy

Color: Black Material: Aluminum Model: Desert Eagle Number of Bases: 1-Piece Style: Taktický Udělat: Magnum Research Dodací hmotnost: 0,04kg Výška přepravy: 19mm Šířka přepravy: 83mm Délka přepravy: 133mm

Detail produktů

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Novinky