Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

TPS PRODUCTS, LLC. XRT X-RINGS PICATINNY SCOPE RINGS


XRT Aluminum Rings 30mm High

XRT Series X-Rings, bringing a whole new level of beauty and precision into an extremely rugged Picatinny platform scope mount. The X-Rings have been built from the bottom up to provide the extreme precision and accuracy that TPS rings have been known for over the last two decades. Další...

Produkt č.: 100036963 071611505826 100036963
XRT Series X-Rings, bringing a whole new level of beauty and precision into an extremely rugged Picatinny platform scope mount. The X-Rings have been built from the bottom up to provide the extreme precision and accuracy that TPS rings have been known for over the last two decades.  The ring bases begin from a solid billet of 7075-T6 aluminum and then machined with our unique Double-Lug Picatinny recoil shoulders from the solid billet.  We have designed and engineered the Double-Lug recoil system to allow the parallelism and perpendicularity of the lugs to the ring bore to be within .0002, thereby providing repeatability that no other mount in the world with similar integrated lugs has done before. The X-Rings are specifically designed for the Mil-STD 1913 rail system.  Because of the Double-Lug system, they do require two (2) accompanied cross-slots in a 1913 cross-slot configuration. The ring caps are secured with Four (4) 8-32 x 1/2″ Camcar-Textron Torx drive screws and with the same unique design that allows you to tighten the left side of the cap, then the right side without the scope rotating.  The edges and corners are fully radiused, preventing snagging, and providing a beautiful appearance to your rifle. The rings are securely attached to your rail with an oversized clamp system using Two (2) 8-32 x 1/2″ Camcar-Textron Torx screws, preventing any chance your rings will loosen or move once installed. With unparalleled precision and holding force, and sleek design, these will meet the extreme expectations of any class shooter. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. .700″ (17.8mm) wide. Height measured from the top of base to center of the ring. 30mm – High: .1.075″ (31.11mm).
5673 6802 5 CZK
100036963
XRT Aluminum Rings 30mm High
Číslo výrobce: 50582 071611505826
6208 CZK 3 6 208,00 Kč *

Skladem v USA 3 ks v USA
Vlastnosti: Finish: Matte Blue Height: 1.225'' Material: Aluminum Scope Tube Diameter: 30mm Size: High Style: Taktické kroužky

Atributy

Finish: Matte Blue Height: 1.225'' Material: Aluminum Scope Tube Diameter: 30mm Size: High Style: Taktické kroužky

Detail produktů

Made in USA



100036961
XRT Aluminum Rings 30mm Low
Číslo výrobce: 50580 071611505802
5673 CZK 3 5 673,00 Kč *

Skladem v USA 3 ks v USA
Vlastnosti: Finish: Matte Blue Height: .925'' Material: Aluminum Scope Tube Diameter: 30mm Size: Low Style: Taktické kroužky
100036962
XRT Aluminum Rings 30mm Medium
Číslo výrobce: 50581 071611505819
5673 CZK 3 5 673,00 Kč *

Skladem v USA 3 ks v USA
Vlastnosti: Finish: Matte Blue Height: 1.075'' Material: Aluminum Scope Tube Diameter: 30mm Size: Medium Style: Taktické kroužky
100036960
XRT Aluminum Rings 30mm S-Low
Číslo výrobce: 52580
5673 CZK 0 5 673,00 Kč *

Specielní produkt: Prosím,počítejte s dobou dodáni delší o 5-8 týdnů navíc
Vlastnosti: Finish: Matte Blue Height: .820'' Material: Aluminum Scope Tube Diameter: 30mm Size: Super Low Style: Taktické kroužky
100036964
XRT Aluminum Rings 30mm X-High
Číslo výrobce: 50583 071611505833
6802 CZK 3 6 802,00 Kč *

Skladem v USA 3 ks v USA
Vlastnosti: Finish: Matte Blue Height: 1.4'' Material: Aluminum Scope Tube Diameter: 30mm Size: Extra High Style: Taktické kroužky
XRT Series X-Rings, bringing a whole new level of beauty and precision into an extremely rugged Picatinny platform scope mount. The X-Rings have been built from the bottom up to provide the extreme precision and accuracy that TPS rings have been known for over the last two decades.  The ring bases begin from a solid billet of 7075-T6 aluminum and then machined with our unique Double-Lug Picatinny recoil shoulders from the solid billet.  We have designed and engineered the Double-Lug recoil system to allow the parallelism and perpendicularity of the lugs to the ring bore to be within .0002, thereby providing repeatability that no other mount in the world with similar integrated lugs has done before. The X-Rings are specifically designed for the Mil-STD 1913 rail system.  Because of the Double-Lug system, they do require two (2) accompanied cross-slots in a 1913 cross-slot configuration. The ring caps are secured with Four (4) 8-32 x 1/2″ Camcar-Textron Torx drive screws and with the same unique design that allows you to tighten the left side of the cap, then the right side without the scope rotating.  The edges and corners are fully radiused, preventing snagging, and providing a beautiful appearance to your rifle. The rings are securely attached to your rail with an oversized clamp system using Two (2) 8-32 x 1/2″ Camcar-Textron Torx screws, preventing any chance your rings will loosen or move once installed. With unparalleled precision and holding force, and sleek design, these will meet the extreme expectations of any class shooter. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. .700″ (17.8mm) wide. Height measured from the top of base to center of the ring. 30mm – High: .1.075″ (31.11mm).