Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika
699618782806 100032046
Lets You Install a Folding Stock On Your Chassis-System Bolt Rifle
The BTFA Buffer Tube Folding Adapter from SB Tactical provides a simple upgrade to improve the portability of your bolt action chassis-system rifle by giving it a folding buttstock. The BTFA lets you put a folding stock on any rifle that uses a standard AR-15 buffer tube as the attachment point for mounting its buttstock. The adapter simply screws into the rear of the chassis - where the AR-15 buffer tube would normally go - and then the buffer tube is screwed into the BTFA. The BTFA adds only 1.1" to your rifle's length-of-pull when installed. You can either compensate for that by extending the buttstock a little less, if it's an adjustable M4 carbine type stock. And many shooters with longer arms will welcome the additional LOP. Reversible for right- or left side-folding - whatever works best for you Securely locks in the open AND closed positions Accepts are AR-15 buffer tube, A2 rifle or M4 carbine type Minimal weight (only 3.4 oz.) & bulk (1.1" added to LOP) Caution: Fits chassis system rifles only, NOT standard AR-15 platform (see Gun Tech Note below) SB Tactical's BTFA Buffer Tube Folding Adapter is constructed of strong yet lightweight 6061 T6 aluminum with a tough military Type III hardcoat anodized finish to resist surface wear and corrosion. Brownells Gun Tech™ Note: You're probably thinking, "So why can't I use the BTFA to put a folding stock on my standard-configuration AR-15? To ensure maximum strength, the BTFA has solid bulkheads that prevent the passage of a recoil buffer, so it will NOT work with the standard AR-15 operating system. For the AR-15, we offer the Law Tactical Gen3-M folding stock adapter (#100-015-850).
0 0 1 CZK
New
Produkt č.: 100032046
SB TACTICAL LOCKING BUFFER TUBE FOLDING ADAPTER
Číslo výrobce: BTFA 699618782806 Adaptér pro skládací pažbu BTFA od výrobce SB Tactical poskytuje jednoduchý upgrade pro zlepšení přenositelnosti vaší pušky s chassis systémem tím, že jí dodá skládací pažbu. BTFA umožňuje instalaci skládací pažby na jakoukoli pušku, která používá standardní AR-15 bufferovou trubku jako bod pro uchycení pažby. Adaptér se jednoduše přišroubuje do zadní části chassis - místo, kam by normálně šla bufferová trubka AR-15 - a poté se bufferová trubka přišroubuje do BTFA. BTFA přidává k délce základního nastavení pušky pouze 1,1" po instalaci. Tento nárůst můžete kompenzovat tím, že pažbu, pokud je to nastavitelný typ M4 karabinové pažby, vysunete o něco méně. A mnoho střelců s delšími pažemi ocení tento dodatečný LOP. Reversibilní pro pravé nebo levé skládání - jak vám to nejlépe vyhovuje Bezpečně zajištěno v otevřené I zavřené pozici Přijímá jakoukoli bufferovou trubku AR-15, A2 puškový nebo M4 karabinový typ Minimální váha (pouze 3,4 oz.) a rozměry (1,1" přidané k LOP) Upozornění: Vhodné pouze pro pušky s chassis systémem, NE pro standardní platformu AR-15 (viz poznámka Gun Tech níže) Adaptér pro skládací pažbu BTFA od společnosti SB Tactical je vyroben z pevného, ale lehkého hliníku 6061 T6 s odolnou vojenskou povrchovou úpravou typu III anodizovanou tvrdou vrstvou, která odolává opotřebení povrchu a korozi. Poznámka Brownells Gun Tech™: Možná si myslíte, 'Tak proč nemohu použít BTFA pro instalaci skládací pažby na mou standardní konfiguraci AR-15?' Pro maximální pevnost má BTFA pevné přepážky, které brání průchodu odrazového tlumiče, takže NEBUDE fungovat se standardním operačním systémem AR-15. Pro AR-15 nabízíme adaptér pro skládací pažbu Law Tactical Gen3-M (#100-015-850).
Upozornit na dostupnost
Neznáma dostupnost

Atributy

Dodací hmotnost: 0,141kg Výška přepravy: 89mm Šířka přepravy: 89mm Délka přepravy: 70mm

Detail produktů

Made in USA
US exportní klasifikace: 0A501.x



Lets You Install a Folding Stock On Your Chassis-System Bolt Rifle
The BTFA Buffer Tube Folding Adapter from SB Tactical provides a simple upgrade to improve the portability of your bolt action chassis-system rifle by giving it a folding buttstock. The BTFA lets you put a folding stock on any rifle that uses a standard AR-15 buffer tube as the attachment point for mounting its buttstock. The adapter simply screws into the rear of the chassis - where the AR-15 buffer tube would normally go - and then the buffer tube is screwed into the BTFA. The BTFA adds only 1.1" to your rifle's length-of-pull when installed. You can either compensate for that by extending the buttstock a little less, if it's an adjustable M4 carbine type stock. And many shooters with longer arms will welcome the additional LOP. Reversible for right- or left side-folding - whatever works best for you Securely locks in the open AND closed positions Accepts are AR-15 buffer tube, A2 rifle or M4 carbine type Minimal weight (only 3.4 oz.) & bulk (1.1" added to LOP) Caution: Fits chassis system rifles only, NOT standard AR-15 platform (see Gun Tech Note below) SB Tactical's BTFA Buffer Tube Folding Adapter is constructed of strong yet lightweight 6061 T6 aluminum with a tough military Type III hardcoat anodized finish to resist surface wear and corrosion. Brownells Gun Tech™ Note: You're probably thinking, "So why can't I use the BTFA to put a folding stock on my standard-configuration AR-15? To ensure maximum strength, the BTFA has solid bulkheads that prevent the passage of a recoil buffer, so it will NOT work with the standard AR-15 operating system. For the AR-15, we offer the Law Tactical Gen3-M folding stock adapter (#100-015-850).
Novinky