FEATURES: Extended lower pad Bolt hold open notch Precision stamped from 1mm 1050 steel Heat treated to 50c One piece exterior construction Made in USA Matte black painted finish Fits standard AK-47 and AK-74 riflesBENEFITS: Extended safety allows for easier manipulation using the firing hand Bolt hold open notch allows for the AK bolt to be locked to the rear by holding the charging handle Heat treated one piece outer construction will hold up to repeated use Matte black painted finish matches traditional AK finishes
SPECS: Fits – AK Stamped receiver rifles. Not for Saiga or Underfolders.
Další...
VLASTNOSTI: Prodloužená spodní podložka Západka pro otevřené držení závěru Přesně vyraženo z 1mm oceli 1050 Tepelně zpracováno na 50c Jednodílná vnější konstrukce Vyrobeno v USA Matně černá lakovaná povrchová úprava Pasuje na standardní pušky AK-47 a AK-74VÝHODY: Prodloužená bezpečnostní pojistka umožňuje snadnější manipulaci používající střeleckou ruku Západka pro otevřené držení závěru umožňuje zablokování závěru AK dozadu držením rukojeti nabíjení Tepelně zpracovaná jednodílná vnější konstrukce vydrží opakované použití Matně černá lakovaná povrchová úprava odpovídá tradičním povrchovým úpravám AK
SPECIFIKACE: Pro – AK se svařovaným přijímačem. Není určeno pro Saiga nebo sklopné pažby.
Další...
Hodnocení zákazníků pro položku KREBS CUSTOM ENHANCED SAFETY
Počet hodnocení: 8
Od brownells.com: 8
Průměrné hodnocení: 4,1
Best upgrade for AK rifles(25.9.2012)
I would use this on any AK rifle I had. It speeds reaction time with AKs. It is probably the single most valuable upgrade for AK rifles.
Great upgrade for any AK(31.1.2013)
This is a must have for any AK period. It allows for easy manipulation of the safety without your hand leaving the pistol grip. This safety will be on all of my AK's
Great addition!(13.4.2013)
A valuable upgrade to any Kalashnikov. The product fits perfectly in My Polytech. This product remedies the biggest Tactical design flaw with the AK series rifle.
A must-have for any modernized AK(7.5.2013)
This safety dropped in to my SLR-106FR (5.56, 74-style) rifle. I also installed the Solar Tactical MFER, which this lever is compatible with. The MFER has a recess for the forward leading edge of the safety/selector, which allows positive location of the safety/selector in the "fire position".
The stamping contour on the bottom edge of the Krebs safety does come in contact with one of the pins, but this can be remidied if a few minutes using basic tools. This wi smooth up the operation on my particular rifle, YMMV.
The finish is of good quality and looks to be durable. it is on the shiny side, so beware if you have a matte black or parkerized rifle and are concerned about matching. Of course, it can be repainted if necessary.
Nice except the finish(29.1.2014)
I would have given it 5 stars if the safety was cerakoted or some other durable coating/finish. It is a glossy black more than any other color, and it does not match the gun. I could care less about it matching. But, I do care about a durable flat finish. For the cost of almost $50, I expected a way better finish. Other than that, it is great.
Does not fit(14.2.2015)
It might be a fine product, but it does not fit my Century Arms C39 Sporter.
Does not work with folding stock(29.4.2015)
Great item, but does not work with classic folding stock AK's.
Thumb enhancement, blocks folding arm from completly folding under. Width of plate prevents folding over also.
Great for fixed stock AKs though.
Should be standard on all AK builds(30.6.2016)
Best upgrade I ever installed; greatly enhances the speed, functionality, and usability of any AK rifle. Compatible with a DDI stamped AK-47, no fitting required.
Produkt č.: 497000011 KREBS CUSTOM ENHANCED SAFETY Číslo výrobce: MKVI VLASTNOSTI: Prodloužená spodní podložka Západka pro otevřené držení závěru Přesně vyraženo z 1mm oceli 1050 Tepelně zpracováno na 50c Jednodílná vnější konstrukce Vyrobeno v USA Matně černá lakovaná povrchová úprava Pasuje na standardní pušky AK-47 a AK-74VÝHODY: Prodloužená bezpečnostní pojistka umožňuje snadnější manipulaci používající střeleckou ruku Západka pro otevřené držení závěru umožňuje zablokování závěru AK dozadu držením rukojeti nabíjení Tepelně zpracovaná jednodílná vnější konstrukce vydrží opakované použití Matně černá lakovaná povrchová úprava odpovídá tradičním povrchovým úpravám AK
2249CZK02 249,00 Kč
*
Předbjednávka, dodací lhůta je přibližně 4-12 týdnů ze skladu z USA.
Made in USA
US exportní klasifikace: 0A501.x
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
FEATURES: Extended lower pad Bolt hold open notch Precision stamped from 1mm 1050 steel Heat treated to 50c One piece exterior construction Made in USA Matte black painted finish Fits standard AK-47 and AK-74 riflesBENEFITS: Extended safety allows for easier manipulation using the firing hand Bolt hold open notch allows for the AK bolt to be locked to the rear by holding the charging handle Heat treated one piece outer construction will hold up to repeated use Matte black painted finish matches traditional AK finishes
SPECS: Fits – AK Stamped receiver rifles. Not for Saiga or Underfolders.
Další...
VLASTNOSTI: Prodloužená spodní podložka Západka pro otevřené držení závěru Přesně vyraženo z 1mm oceli 1050 Tepelně zpracováno na 50c Jednodílná vnější konstrukce Vyrobeno v USA Matně černá lakovaná povrchová úprava Pasuje na standardní pušky AK-47 a AK-74VÝHODY: Prodloužená bezpečnostní pojistka umožňuje snadnější manipulaci používající střeleckou ruku Západka pro otevřené držení závěru umožňuje zablokování závěru AK dozadu držením rukojeti nabíjení Tepelně zpracovaná jednodílná vnější konstrukce vydrží opakované použití Matně černá lakovaná povrchová úprava odpovídá tradičním povrchovým úpravám AK
SPECIFIKACE: Pro – AK se svařovaným přijímačem. Není určeno pro Saiga nebo sklopné pažby.
Další...
Hodnocení zákazníků pro položku KREBS CUSTOM ENHANCED SAFETY
Počet hodnocení: 8
Od brownells.com: 8
Průměrné hodnocení: 4,1
Best upgrade for AK rifles(25.9.2012)
I would use this on any AK rifle I had. It speeds reaction time with AKs. It is probably the single most valuable upgrade for AK rifles.
Great upgrade for any AK(31.1.2013)
This is a must have for any AK period. It allows for easy manipulation of the safety without your hand leaving the pistol grip. This safety will be on all of my AK's
Great addition!(13.4.2013)
A valuable upgrade to any Kalashnikov. The product fits perfectly in My Polytech. This product remedies the biggest Tactical design flaw with the AK series rifle.
A must-have for any modernized AK(7.5.2013)
This safety dropped in to my SLR-106FR (5.56, 74-style) rifle. I also installed the Solar Tactical MFER, which this lever is compatible with. The MFER has a recess for the forward leading edge of the safety/selector, which allows positive location of the safety/selector in the "fire position".
The stamping contour on the bottom edge of the Krebs safety does come in contact with one of the pins, but this can be remidied if a few minutes using basic tools. This wi smooth up the operation on my particular rifle, YMMV.
The finish is of good quality and looks to be durable. it is on the shiny side, so beware if you have a matte black or parkerized rifle and are concerned about matching. Of course, it can be repainted if necessary.
Nice except the finish(29.1.2014)
I would have given it 5 stars if the safety was cerakoted or some other durable coating/finish. It is a glossy black more than any other color, and it does not match the gun. I could care less about it matching. But, I do care about a durable flat finish. For the cost of almost $50, I expected a way better finish. Other than that, it is great.
Does not fit(14.2.2015)
It might be a fine product, but it does not fit my Century Arms C39 Sporter.
Does not work with folding stock(29.4.2015)
Great item, but does not work with classic folding stock AK's.
Thumb enhancement, blocks folding arm from completly folding under. Width of plate prevents folding over also.
Great for fixed stock AKs though.
Should be standard on all AK builds(30.6.2016)
Best upgrade I ever installed; greatly enhances the speed, functionality, and usability of any AK rifle. Compatible with a DDI stamped AK-47, no fitting required.