Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

EGW
S&W 1911 FIXED REAR SIGHT LEUPOLD DELTAPOINT PRO SIGHT MOUNT

296000549
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
1999 1999 1 CZK
New
Produkt č.: 296000549
EGW FIXED REAR SIGHT MOUNT FOR DEALTAPOINT PRO FITS S&W 1911 BLK
Číslo výrobce: 49400 Materiál: Hliník 7075 Povrchová úprava: Matně černý Hardcoat Celková délka: 1.811\" Celková šířka: .99\" Montážní hardware: (2) šrouby s válcovou hlavou 6-32, (2) šrouby se zapuštěnou hlavou 6-32, (1) zajišťovací šroub 6-32 Kompatibilita s červenými bodovými zaměřovači: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter Montážní lišty EGW pro červené bodové zaměřovače jsou určeny k instalaci zleva doprava (s hledím směřujícím vpřed). Drážka má progresivní zkosení pro snadnější montáž. Jednoduše odstraňte zadní mířidlo vaší zbraně a nahraďte jej naší montážní lištou, abyste mohli namontovat váš červený bodový zaměřovač Vortex Viper/Venom, Burris FastFire nebo Docter. Nejsou vyžadovány žádné úpravy. Náš montážní systém můžete kdykoli odstranit a znovu nasadit zadní mířidlo. Montážní hardware je součástí balení. Instrukce pro instalaci Odstraňte zadní mířidlo* Nainstalujte montážní lištu EGW do drážky Utáhněte zajišťovací šroub (pokud je k dispozici) Umístěte červený bodový zaměřovač na montážní lištu EGW (umístění malého kousku papíru mezi červený bodový zaměřovač a montážní lištu usnadní demontáž a zabrání přenosu Loctite na červený bodový zaměřovač.) Aplikujte modrý Loctite na dodané montážní šrouby Přitáhněte montážní šrouby na 15in/lbs 2 šrouby s válcovou hlavou - Dodávané pro zaměřovače Vortex Viper a Venom 2 šrouby se zapuštěnou hlavou - Dodávané pro zaměřovače Burris FastFire a Docter K šroubům, které jsou součástí tohoto montážního systému, je potřeba imbusový klíč o velikosti 5/64\" pro instalaci.
1999 CZK 0 1 999,00 Kč *
Předbjednávka, dodací lhůta je přibližně 4-12 týdnů ze skladu z USA.
Vlastnosti: Barevný: Black Make: Smith & Wesson Material: Aluminum Model: 1911 Number of Bases: 1-Piece Style: Taktický

Atributy

Color: Black Material: Aluminum Model: 1911 Number of Bases: 1-Piece Style: Taktický Udělat: Smith & Wesson Dodací hmotnost: 0,227kg Výška přepravy: 25mm Šířka přepravy: 102mm Délka přepravy: 152mm

Detail produktů

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Novinky