Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

EGW
S&W 1911 ADJUSTABLE VORTEX VIPER/VENOM SIGHT MOUNT

841370116959 296000535
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.  
0 0 1 CZK
Produkt č.: 296000535
EGW S&W 1911 ADJUSTABLE VORTEX VIPER/VENOM SIGHT MOUNT
Číslo výrobce: 49296 841370116959 Materiál: Hliník 7075 Povrchová úprava: Matně černý tvrdý povlak Celková délka: 1.811\" Celková šířka: .99\" Montážní hardware: (2) šrouby s tlačítkovou hlavou 6-32, (2) ploché hlavy šroubů 6-32, (1) zajišťovací šroub 6-32 Kompatibilita s červeným bodem: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter Montážní souprava od EGW je určena k instalaci zleva doprava (s hlavní směřující dopředu). Drážka má progresivní zkosení pro snazší instalaci. Jednoduše odstraňte zadní mířidlo vaší zbraně a nahraďte je naší montážní soupravou, abyste mohli namontovat vaše červené bodové zaměřovače Vortex Viper/Venom, Burris FastFire nebo Docter. Nejsou vyžadovány žádné úpravy. Naši montáž můžete kdykoli sundat a znovu nasadit zadní mířidlo. Montážní hardware je součástí balení. Instalační pokyny Odstraňte zadní mířidlo* Nainstalujte montážní soupravu EGW do drážky Utáhněte zajišťovací šroub (pokud je to aplikovatelné) Umístěte červený bodový zaměřovač na montážní soupravu EGW (umístění malého kusu papíru mezi červený bodový zaměřovač a montážní soupravu usnadní demontáž a zabrání znečištění červeného bodového zaměřovače Loctitem.) Aplikujte modrý Loctite na přiložené montážní šrouby Utáhněte montážní šrouby s momentem 15in/lbs 2 šrouby s tlačítkovou hlavou - Přiložené pro zaměřovače Vortex Viper a Venom 2 ploché hlavy šroubů - Přiložené pro zaměřovače Burris FastFire a Docter Šrouby, které jsou součástí této montáže, vyžadují pro instalaci imbusový klíč 5/64''.
Upozornit na dostupnost
Neznáma dostupnost
Vlastnosti: Barevný: Black Make: Smith & Wesson Material: Aluminum Model: 1911 Number of Bases: 1-Piece Style: Taktický

Atributy

Color: Black Material: Aluminum Model: 1911 Number of Bases: 1-Piece Style: Taktický Udělat: Smith & Wesson Dodací hmotnost: 0,041kg Výška přepravy: 25mm Šířka přepravy: 76mm Délka přepravy: 127mm

Detail produktů

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.  
Novinky