Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

EGW
SIG SAUER P220 10MM HUNTER LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370117086 296000541
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
0 0 1 CZK
New
Produkt č.: 296000541
EGW SIG P220 10MM HUNTER LUEPOLD DELTAPOINT PRO SIGHT MOUNT
Číslo výrobce: 49392 841370117086 Materiál: Hliník 7075 Povrchová úprava: Matný černý Hardcoat Celková délka: 1.811\" Celková šířka: .99\" Montážní hardware: (2) Šrouby s válcovou hlavou 6-32, (2) Ploché hlavové šrouby 6-32, (1) Upevňovací šroub 6-32 Kompatibilita červeného bodu: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter Montážní základny EGW pro červené bodové zaměřovače jsou určeny k instalaci zleva doprava (s hlavní směřující vpřed). Drážka má progresivní kužel pro snazší instalaci. Jednoduše odstraňte zadní mířidlo na vaší zbrani a nahraďte ho naší montážní základnou, abyste mohli nainstalovat vaše zaměřovače Vortex Viper/Venom, Burris FastFire nebo Docter. Nejsou potřeba žádné úpravy. Naši montážní základnu můžete kdykoliv sundat a znovu nainstalovat zadní mířidlo. Montážní hardware je součástí balení. Instrukce pro instalaci: Odstraňte zadní mířidlo* Nainstalujte montážní základnu EGW do drážky Utáhněte upevňovací šroub (pokud je použit) Umístěte červený bodový zaměřovač na montážní základnu EGW (umístění malého kousku papíru mezi zaměřovač a základnu usnadní pozdější odstranění a zabrání znečištění zaměřovače Loctitem.) Aplikujte modrý Loctite na přiložené montážní šrouby Utáhněte montážní šrouby s momentem 15in/lbs 2 Šrouby s válcovou hlavou - Přiložené pro zaměřovače Vortex Viper a Venom 2 Ploché hlavové šrouby - Přiložené pro zaměřovače Burris FastFire a Docter Pro instalaci přiložených šroubů je potřeba imbusový klíč 5/64\''.
Upozornit na dostupnost
Neznáma dostupnost
Vlastnosti: Barevný: Black Make: Sig Sauer Material: Aluminum Model: P220 Number of Bases: 1-Piece Style: Taktický

Atributy

Color: Black Material: Aluminum Model: P220 Number of Bases: 1-Piece Style: Taktický Udělat: Sig Sauer Dodací hmotnost: 0,454kg Výška přepravy: 25mm Šířka přepravy: 25mm Délka přepravy: 25mm

Detail produktů

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Novinky