Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika
696177784845 100041436
An Easy Way to Level Your Optic
The human eye can't detect whether or not a scope reticle is level if the degree is off by 3 degrees or less, but if your scope is off by just 3 degrees, then you're in trouble when it comes to making in-reticle adjustments for those long-range shots. The Fix It Sticks Scope Jack Leveling Tool is designed to get your scope set up right, and it works with any 1/4-inch driver! All you have to do is mount the jack to the Picatinny rail sitting underneath your riflescope. Then turn the drive handle until the arm on the jack engaged with the flat spot underneath your windage and elevation turrets. This ensures that your scope is perfectly level, and the jack will maintain pressure on this flat spot while you tighten your rings down. In order for the Fix It Sticks Scope Jack Leveling Tool to work, you have to have a short section of Picatinny rail sitting just underneath your scope body. Depending on how much clearance is available, you might have to take off the thumb screw and clamp to slide the jack onto the mounting surface from the side. Fix It Sticks says that there must be at least 1/4 inch of clearance to use the jack.
0 0 1 CZK
Produkt č.: 100041436
FIX IT STICKS SCOPE JACK LEVELING TOOL
Číslo výrobce: FISSJACK 696177784845 Lidské oko nedokáže rozpoznat, zda je zaměřovač puškohledu vyrovnaný, pokud je úhel odchýlení menší než 3 stupně. Avšak pokud je váš puškohled odchýlený o pouhé 3 stupně, může to při nastavování zaměřovače pro dlouhé vzdálenosti způsobit problémy. Nástroj pro vyrovnání puškohledu Fix It Sticks Scope Jack Leveling Tool je navržen tak, aby bylo nastavení vašeho puškohledu korektní, a funguje s jakýmkoli 1/4palcovým šroubovákem! Stačí připevnit zařízení na Picatinny lištu umístěnou pod vaším puškohledem. Poté otáčejte rukojetí, dokud se rameno zařízení nedotkne ploché části pod vašimi turety pro nastavení větru a elevace. To zajistí, že váš puškohled bude dokonale vyrovnaný, a zařízení udrží tlak na této ploché části, zatímco utahujete kroužky. Aby nástroj Fix It Sticks Scope Jack Leveling Tool fungoval, musíte mít pod tělem puškohledu krátký úsek Picatinny lišty. V závislosti na dostupném prostoru možná bude nutné odšroubovat palcový šroub a svorku, aby bylo možné zařízení nasunout na montážní plochu ze strany. Fix It Sticks uvádí, že pro použití zařízení musí být k dispozici alespoň 1/4 palce prostoru.
Upozornit na dostupnost
Neznáma dostupnost

Atributy

Dodací hmotnost: 0,045kg Výška přepravy: 25mm Šířka přepravy: 76mm Délka přepravy: 152mm




An Easy Way to Level Your Optic
The human eye can't detect whether or not a scope reticle is level if the degree is off by 3 degrees or less, but if your scope is off by just 3 degrees, then you're in trouble when it comes to making in-reticle adjustments for those long-range shots. The Fix It Sticks Scope Jack Leveling Tool is designed to get your scope set up right, and it works with any 1/4-inch driver! All you have to do is mount the jack to the Picatinny rail sitting underneath your riflescope. Then turn the drive handle until the arm on the jack engaged with the flat spot underneath your windage and elevation turrets. This ensures that your scope is perfectly level, and the jack will maintain pressure on this flat spot while you tighten your rings down. In order for the Fix It Sticks Scope Jack Leveling Tool to work, you have to have a short section of Picatinny rail sitting just underneath your scope body. Depending on how much clearance is available, you might have to take off the thumb screw and clamp to slide the jack onto the mounting surface from the side. Fix It Sticks says that there must be at least 1/4 inch of clearance to use the jack.
Novinky