90 degree standard throw lever 60 degree short throw lever Available in black Drop in replacement for Mil-Spec selector switch Fully ambidextrous Not recommended to be used with the Hipertouch trigger
90 stupňový standardní páka pro hod 60 stupňový krátký hod Páka k dispozici v černé Barva Náhrada za Mil-Spec přepínač plně oboustranný Není doporučeno používat s triggerem Hipertouch
Atributy
Typ zbraně:AR-15
Dodací hmotnost:0,018kg
Výška přepravy:6mm
Šířka přepravy:83mm
Délka přepravy:108mm
UPC:811452029309
Detail produktů
Made in USA
US exportní klasifikace: 0A501.x
Recenze zákazníků
Hodnocení zákazníků (6)
3,5 / 5
Rozhodně doporučuji
Suprised! 13.12.2017
I did not actually read the product description nor reviews when i ordered it. I thought it was just a regular ambi safety with fancy arms. When i got it, i realized that it has 2 safety groove cut in it, 1 side is the regular 90 degree cut and the other side is 60 degree short throw cut. That is a bonus for me as i have both regular marked lowers and 60 degree sts marked lowers.
I did not experienced any fitment issue that other reviewers have. It fitted my Noveske, aero precision, armalite and spike tactical lowers. It is a tighter fit in my Noveske, which i believe has everything to do with the fact that Noveske cerakote and anodize all their lowers.
I will be buying a few more of these.
Moc nedoporučuji
Maybe not. 4.6.2017
Safety was mot mil spec diameter. Would not fit at all in hole, when standard mil spec single selector safety dropped right in. Had to auger it into both holes so it milled out some of the aluminum lower receiver. Finally took an emery cloth to it and filed it down on both ends of the shaft. Put the lower together and it wouldn't go full 12 o'clock to release the trigger without using your thumb to give it that extra millimeter(s). Bad tetent channel maybe? Took it out and reversed it so it's now a short throw.... now it works, but a lot or work and not a cheap safety for the trouble it gave me.
Doporučuji s výhradami
Didn't fit on two different rifles. 27.4.2017
This is my 3rd Seekins ambi safety and I've been pleased up to this point. The first two I purchased were installed on Palmetto State Armory lowers and they went in and function without issue. Based on those experiences I purchased a 3rd Seekins for use on a factory Daniel Defense rifle. The safety seems a bit overlarge in diameter as it was very tight when inserted in the first hole in the receiver, and could not be pushed all the way to the other side. I then tried to install the safety on a factory Armalite rifle, and again would not fit. Fortunately I had another rifle with a Palmetto receiver that had a CAA ambi safety installed. I removed the CAA and installed the Seekins in the Palmetto without difficulty. The CAA safety was then installed in the Armalite rifle without difficulty. I could have done a bit of careful fitting and probably gotten the Seekins to fit in the Armalite and Daniel Defense but I don't really want to be sanding on an anodized part.
Rozhodně doporučuji
Well made, easy install, good fit. 23.3.2017
Purchased two of these in black. Installed one in a Palmetto AR9 and the other in a Palmetto AR15. Both went in without difficulty, look good, and operate well. I shoot left-handed and this product makes manipulating the safety much easier.
Rozhodně doporučuji
Great product 29.3.2016
Super easy to install, especially liked the way you can switch the controls to be 60 or 90 degrees just by turning over the base. Way better pricing than other versions on the market.
Nedoporučuji
Loose fit 11.3.2016
There is a 3/32" gap between the receiver and the safety lever on each side of the receiver. Almost slips over the stops on the receiver. Also, the anodizing on one of the levers is purple instead of black. I will be returning this. This is the first Seekins product I have ever had an issue with.
Oboustranný SAFETY SELECTOR KIT v černé barvě pro AR-15. 🔧 Vyměnitelný, ideální pro precizní ovládání. Objednejte nyní!
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Prohlášení o kontrole do destinace: "Tyto položky jsou kontrolovány vládou Spojených států a jsou povoleny na vývoz pouze do země konečného určení k použití konečným příjemcem nebo konečným uživatelem (uživatel,), kteří jsou zde identifikováni. Nesmějí být dále prodány, přepraveny ani jinak zlikvidovány v žádné jiné zemi nebo jiné osobě, než je oprávněn konečný příjemce nebo koncový uživatel, a to buď v jejich původní formě nebo po začlenění do jiných položek, aniž by nejprve získali souhlas od vlády USA nebo byly jinak povoleny."
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Odolný zásobník z lisovaného polymeru s kapacitou 30 ran, určený pro AR-15, dostupný v černé barvě.
Protiskluzový podavač a pružina z nerezové oceli zajišťují spolehlivý výkon i při dlouhodobém plném nabití.
MagLevel konfigurace s okny na obou stranách umožňuje snadné sledování množství munice.
Popruh MS4 je dvoupáčková verze standardního popruhu MS3 s tlačítkovými QD Sling Swivels místo Paraclips.
Poskytuje možnost přestavitelného popruhu z jednobodového na dvoubodový kompatibilní s QD Attachment Points.
Vyroben z nylonu, rychle odepínací a v barevném provedení Coyote.
Segmenty hliníkové Picatinny lišty jsou kompatibilní s KeyMod lištami od MIDWEST INDUSTRIES i jinými KeyMod lištami.
Dostupné ve dvou délkách: 2.1" s 5 sloty a 3-3/4" s 9 sloty, všechny segmenty se prodávají samostatně.
Vyrobeno z hliníku 6061 T6 s matným černým povrchem, zahrnuje montážní hardware.
Kompatibilní se všemi M-LOK pažbami a předpažbími, umožňuje připevnit příslušenství s montáží na 1913 Picatinny kolejnici.
Vyrobeno z anodizovaného hliníku dle vojenských specifikací nebo z proprietárního zesíleného kompozitu pro zvýšenou pevnost a odolnost.
Obsahuje veškerý potřebný hardware pro připevnění kolejnic do M-LOK slotů na hliníkových nebo polymerových pažbách a předpažbích.
Inovativní montážní systém umožňuje aplikovat "Magpul Method" na brokovnici Remington 870, čímž ji promění v taktickou zbraň.
Komponenty jsou vyrobeny z tvrdého polymeru, který zaručuje odolnost v náročných podmínkách, a montážní hardware je součástí balení.
Montáž lze umístit na levou nebo pravou stranu přijímače a je kompatibilní s různými systémy popruhů, včetně HK, MASH hook a Magpul MS3 Paraclip.