Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

EGW
CZ P10C LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370117093 296000542
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
0 0 1 CZK
Produkt č.: 296000542
EGW CZ P10C LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Číslo výrobce: 49393 841370117093 Materiál: Hliník 7075 Povrchová úprava: Matný černý tvrdý povlak Celková délka: 1.811" Celková šířka: .99" Montážní hardware: (2) 6-32 Button Head šrouby, (2) 6-32 Flat Head šrouby, (1) 6-32 Set šroub Kompatibilita s červeným bodem: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter Montážní stojany EGW jsou určeny k instalaci zleva doprava (s hlavní zaměřenou dopředu). Drážka má progresivní kužel pro snazší instalaci. Jednoduše odstraňte zadní mířidlo na vaší zbrani a nahraďte jej naším montážním stojanem, abyste mohli namontovat váš Vortex Viper/Venom, Burris FastFire nebo Docter červený bod. Nejsou vyžadovány žádné úpravy. Naši montáž můžete kdykoliv sundat a znovu nasadit zadní mířidlo. Montážní hardware je součástí balení. Instrukce pro instalaci Odstraňte zadní mířidlo* Nainstalujte montážní stojan EGW do drážky Utáhněte set šroub (pokud je příslušný) Umístěte červený bod na montážní stojan EGW (umístění malého kousku papíru mezi červeným bodem a montážním stojanem usnadní pozdější odstranění a zabrání kontaminaci Loctitem.) Aplikujte modrý Loctite na přiložené montážní šrouby Utáhněte montážní šrouby na 15in/lb 2 Button Head šrouby - Dodávány pro Vortex Viper a Venom mířidla 2 Flat Head šrouby - Dodávány pro Burris FastFire a Docter mířidla Šrouby, které jsou součástí tohoto montážního stojanu, vyžadují k instalaci 5/64'' imbusový klíč.
Upozornit na dostupnost
Neznáma dostupnost
Vlastnosti: Barevný: Black Make: CZ Material: Aluminum Model: P-10 Compact Number of Bases: 1-Piece Style: Taktický

Atributy

Color: Black Material: Aluminum Model: P-10 Compact Number of Bases: 1-Piece Style: Taktický Udělat: CZ Dodací hmotnost: 0,036kg Výška přepravy: 25mm Šířka přepravy: 89mm Délka přepravy: 140mm

Detail produktů

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Novinky