Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika
841370116591 296000573
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
0 0 1 CZK
New
Produkt č.: 296000573
EGW BLANK TRIJICON RMR SIGHT MOUNT
Číslo výrobce: 49514 841370116591 Materiál: Hliník 7075 Povrchová úprava: Matný černý Hardcoat Celková délka: 1.780\" Celková šířka: 1.1\" Montážní hardware: (2) ploché hlavové šrouby 6-32, (1) sada šroubů 6-32 X 3/16 Kompatibilita s červeným bodem: Trijicon RMR, Holosun HS507C Tato montáž pasuje na: Baby Desert Eagle (po roce 2006) EAA Witness Elite Match Tato montáž neodpovídá: Rock Island 1911s Jednoduše odstraňte zadní mířidlo vaší zbraně a nahraďte jej naší montáží, abyste mohli namontovat váš kolimátor Trijicon RMR. Nejsou vyžadovány žádné úpravy. Naši montáž můžete kdykoli odstranit a znovu nasadit zadní mířidlo. Montážní hardware je součástí balení. Instrukce pro instalaci Odstraňte zadní mířidlo* Nainstalujte montáž EGW Sight Mount do drážky Utáhněte sada šroub (pokud je to aplikovatelné) Umístěte kolimátor na montáž EGW Sight Mount (umístění malého kusu papíru mezi kolimátor a montáž usnadní odstranění a ochrání kolimátor před Loctitem.) Aplikujte modrý Loctite na přiložené montážní šrouby Utáhněte montážní šrouby na 15in/lb 2 ploché hlavové šrouby - dodávané pro Trijicon RMR Šrouby, které jsou součástí této montáže, vyžadují pro instalaci imbusový klíč o velikosti 5/64\".
Upozornit na dostupnost
Neznáma dostupnost
Vlastnosti: Barevný: Black Material: Aluminum

Atributy

Color: Black Material: Aluminum Dodací hmotnost: 0,052kg Výška přepravy: 25mm Šířka přepravy: 83mm Délka přepravy: 140mm

Detail produktů

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Novinky