Brownells Česká republika - Světově největší dodavatel součástek zbraní, zbrojního vybavení a příslušenství. Česká republika

AMERICAN DEFENSE MANUFACTURING
AIMPOINT HIGH PROFILE MOUNT

818503010125 100003651
Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. AD-68 Aimpoint Mount is designed for Aimpoint optics or similar aiming devices requiring a single, 30mm ring, including the Comp C3 and M2/ML2/M3/ML3 series. Available in four configurations to suit a variety of mounting needs. High positions the backup sight picture in the lower 1/3 of the optic viewing area.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height measured from top of rail to bottom of scope body.  High – 1.120” high.

6199 6199 1 CZK
New
Produkt č.: 100003651
AMERICAN DEFENSE MANUFACTURING AIMPOINT HIGH PROFILE MOUNT
Číslo výrobce: AD68HSTD 818503010125 Systém rychlého uvolnění s páčkou a zámkem pevně drží na plochých lištách a ani pod silným zpětným rázem se neuvolní – čím větší síla působí na páčku, tím pevněji se zamyká. Stisknutím uvolňovacího tlačítka se páčka otevře a montáž se snadno zvedne z pušky. Nastavitelný plochým šroubovákem nebo dokonce mincí pro ultra-pevné, neposunutelné uchycení na téměř jakékoli lišty typu Picatinny nebo Weaver, včetně příliš velkých nebo malých komerčních lišt. Páčka může být konfigurována tak, aby se zamykala dopředu nebo dozadu podle preferencí uživatele. Velká západka na straně montáže zapojuje maximální množství plochy lišty, zatímco příčný šroub a dvě integrované zamykací čepičky zajišťují pevné zapadnutí do drážek lišty a brání pohybu při zpětném rázu. Pět odolných ocelových šestihranných šroubů (tři nahoře, dva dole) svírá půlené kruhové části kroužku dohromady. Vyřezávání na bocích kroužku a v základně snižuje hmotnost bez obětování pevnosti. Montáž AD-68 Aimpoint je navržena pro optiku Aimpoint nebo podobná zaměřovací zařízení vyžadující jeden 30mm kroužek, včetně sérií Comp C3 a M2/ML2/M3/ML3. K dispozici ve čtyřech konfiguracích pro různé montážní potřeby. Vysoká pozice umisťuje záložní obraz zaměřovače do dolní 1/3 optického zorného pole.
6199 CZK 6 6 199,00 Kč *
Dodací lhůta je přibližně 14-21 dní.
6 Počet ks. skladem USA
Vlastnosti: Barevný: Matte Black Finish: Black Height: 1.120'' Make: AR-15 Number of Bases: 1-Piece Scope Tube Diameter: 30mm Size: High Style: High Profile

Atributy

Color: Matte Black Finish: Black Height: 1.120'' Number of Bases: 1-Piece Scope Tube Diameter: 30mm Size: High Style: High Profile Udělat: AR-15 Dodací hmotnost: 0,091kg Výška přepravy: 58mm Šířka přepravy: 86mm Délka přepravy: 145mm

Detail produktů

Made in USA




Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. AD-68 Aimpoint Mount is designed for Aimpoint optics or similar aiming devices requiring a single, 30mm ring, including the Comp C3 and M2/ML2/M3/ML3 series. Available in four configurations to suit a variety of mounting needs. High positions the backup sight picture in the lower 1/3 of the optic viewing area.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height measured from top of rail to bottom of scope body.  High – 1.120” high.

Novinky